Investigation of the effect of copper content added to aluminium on cutting force in MQL turning (Ficici, Ferit; Ozdemir, Ismail*; Grund, Thomas; Lampke, Thomas)

Hardening by annealing in the medium-entropy alloy CrCoNi following equal-channel angular pressing (Rymer, Lisa-Marie*; Höppel, Heinz Werner; Ortner, Patrick; Pfeffer, Nina; Stark, Andreas; Winter, Lisa; Lampke, Thomas)

Prediction of fatigue strength in incrementally formed sheet metal parts with varying residual stresses (Bergelt, Tim*; Winter, Lisa; Härtel, Markus; Grünewald, Steffen; Rymer, Lisa-Marie; Maaß, Fabian; Joghan, Hamed Dardaei; Korkolis, Yannis P.; Tekkaya, A. Erman; Lampke, Thomas)

Intelligent Decision Support in Thermal Spraying Through AI Modelling of Small and Smart Data: A Case Study on HVAF- and HVOF-Sprayed WC-CoCr Coatings (Bocklisch, Franziska*; Lanz, Oliver; Torkashvand, Kaveh; Bocklisch, Steffen; Lampke, Thomas; Joshi, Shrikant)

Wear and corrosion properties of SLM-manufactured 17-4PH components: A comparison of the effects of solution heat treatment, ageing and combined treatments (Wang, Zechen*; Grimm, Maximilian; Lindner, Thomas; Schubert, Frank; Winkler, Kerstin; Lampke, Thomas)

Infrared thermography of thermal spray coating processes as a quality monitoring tool (Lindner, Thomas*; Kaur, Sahib; Grimm, Maximilian; Schlegel, Kay; Lampke, Thomas)

Effect of Nb₀.₅ and Mo₀.₇₅ additions on the in vitro corrosion and wear resistance of high-speed laser metal-deposited Al₀.₃CrFeCoNi high-entropy alloy coatings (Dikici, Burak*; Lindner, Thomas; Lampke, Thomas*; Grund, Thomas; Gunay Bulutsuz, Asli)

Advances in cold spraying for polymer matrix composites: enhanced LSP and EMI shielding performance – a review and future directions (Karahan, Bugra; Ozdemir, Ismail*; Grund, Thomas; Hanisch, Niclas; Lampke, Thomas)

Damage evolution of copper inductors used for electromagnetic forming (Rymer, Lisa-Marie*; Winter, Lisa; Linnemann, Maik; Winter, Sven; Psyk, Verena; Lampke, Thomas)

High-cycle fatigue behaviour of high-speed blanked 5754 aluminium sheets (Winter, Lisa*; Winter, Sven; Psyk, Verena; Drehmann, Rico; Lampke, Thomas)

Theoretical investigations and methodology for modelling and direct simulation of electrochemical pulse plating in the diffusion boundary layer (Schwöbel, Stephan D.*; Mehner, Thomas; Lampke, Thomas)

Fractal design principles for the controlled adjustment of the interlaminar strength of metal-thermoplastic composites (Lampke, Thomas*; Schubert, Andreas*; Steinert, Philipp; Hanisch, Niclas; Liborius, Hendrik; Lindner, Thomas; Nestler, Andreas; Schaarschmidt, Ingo)

The influence of scale in surface design with regard to laser structures for enhancing adhesion in polymer-metal hybrids: A fractal dimension approach (Hanisch, Niclas*; Steinert, Philipp; Lindner, Thomas; Liborius, Hendrik; Schubert, Andreas; Lampke, Thomas)

Enhanced surface finishing of selective laser-melted 17-4PH steel using a novel two-step electrolyte plasma polishing process (Wang, Zechen*; Grimm, Maximilian; Lindner, Thomas; Schubert, Frank; Winkler, Kerstin; Weise, Tobias; Lampke, Thomas)

Enhancing the corrosion resistance and radiation shielding of AlSl 304 SS with Nb- and Mo-added Al0.3CrFeCoNi-based high-entropy alloy coatings in 3.5 wt% NaCl: The effect of ambient temperature (Dikici, Burak*; Lindner, Thomas; Sakar, Erdem*; Lampke, Thomas*; Seifzadeh, Davod; Grund, Thomas; Kamaci, Kübra)

Microstructure and wear resistance of environmentally friendly NbC-FeCr coatings: An evaluation of HVOF process parameters (Tegelkamp, Lukas*; Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Lindner, Thomas; Lampke, Thomas)

Enhanced Wear Resistance of Gas-Nitrided AlSi 431 HVOF Coatings at Elevated Temperatures (Hanisch, Niclas*; Saborowski, Erik; Lindner, Thomas; Preuß, Bianca; Tchinou, Serge; Börner, Kristian; Lampke, Thomas)

On the relationship between the degree of particle melting and the phase transformation of alumina and alumina-based solid solution powders during atmospheric plasma spraying (Grimm, Maximilian*; Conze, Susan; Berger, Lutz-Michael; Lampke, Thomas)

Microstructural and mechanical properties of a hard anodic coating applied to an elastically pre-stressed aluminium substrate (Thomas George, Linto*; Winter, Lisa; Simchen, Frank; Breitfeld, Tobias; Lampke, Thomas)

Micro-scratch tests as a method for determining the wear resistance of high-speed blanked surfaces (Winter, Lisa*; Drehmann, Rico; Lampke, Thomas)

Two-Step Plasma Electrolytic Oxidation of Advanced High-Strength Steel in Aluminate and Silicate Solutions (Morgenstern, Roy*; Mehner, Thomas; Lampke, Thomas)

Particle-plasma interactions: the melting state of particles and its impact on phase composition and deposition efficiency in atmospheric plasma-sprayed alumina coatings (Grimm, Maximilian*; Lindner, Thomas; Lampke, Thomas)

Semi-additive manufacturing of metal-polymer hybrid parts by direct material extrusion onto anodised and organosilicate-coated aluminium (Dittes, Axel*; Bretschneider, Eric; Hanisch, Niclas; Mehner, Thomas; Segel, Frank; Lehmann, Lars; Gröger, Sophie; Wünsch, Florian; Ihlemann, Jörn; Lampke, Thomas)

Combined Effect of Particle Reinforcement and T6 Heat Treatment on the Compressive Deformation Behaviour of an A357 Aluminium Alloy at Room Temperature and at 350 °C (Hirsch, Sarah Johanna*; Berndt, Nadja; Grund, Thomas; Lampke, Thomas)

Quantitative Model for Predicting the Corrosion Rate of Cold-Rolled 316L Steel (Dittes, Axel*; Mehner, Thomas; Friedrich, Sandra; Awiszus, Birgit; Lampke, Thomas)

Hybrid decision-making in atmospheric plasma spraying enables human-machine collaboration (Bocklisch, Franziska*; Bocklisch, Steffen F.; Grimm, Maximilian; Lampke, Thomas; Joshi, Shrikant)

Towards a Cognition-Based Framework for Describing Interdisciplinary Expert Team Processes for Cognitive Robotics in Industry 5.0 Technologies (Morgenstern, Tina; Klichowicz, Anja; Bengler, Philip; Todtermuschke, Marcel; Bocklisch, Franziska*)

Development of CoCr₀.₆₅FeNi-BSiC as a self-fluxing high-entropy alloy for thermal spraying (Preuß, Bianca*; Lindner, Thomas; Kaur, Sahib; Cabrera, Jorge Eduardo Tapia; Hanisch, Niclas; Schwarz, Thomas; Lampke, Thomas)

Wear- and corrosion-resistant eutectic high-entropy alloy AI0.3CoCrFeNiMo0.75 produced by laser metal deposition and spark plasma sintering (Preuß, Bianca*; Lindner, Thomas; Uhlig, Thomas; Mehner, Thomas; Töberling, G.; Wagner, Guntram; Lampke, Thomas)

Comparison of 2D and 3D measurement methods for evaluating laser-structured aluminium surfaces using fractal dimension (Hanisch, Niclas*; Steinert, Philipp; Saborowski, Erik; Liborius, Hendrik; Lindner, Thomas; Bandaru, Nithin Kumar; Schubert, Andreas; Lampke, Thomas)

The combination of diamond smoothing and intermediate cooling during wire arc spraying of Ni-5w%Al onto 1.0032 to improve high-cycle fatigue behaviour (Rymer, Lisa-Marie*; Winter, Lisa; Liborius, Hendrik; Lindner, Thomas; Schubert, Andreas; Lampke, Thomas)

Forming Behaviour of Additively Manufactured Al/Ti Material Compounds Produced by Cold Spraying (Drehmann, Rico*; Colditz, Pascal; Graf, Marcel; List, Alexander; Gärtner, Frank; Awiszus, Birgit; Lampke, Thomas)

Evaluation of the Wear Performance of Polymer Overlays on Engine Bearings (Özdemir, Ismail*; Bulbul, Bahattin; Kiracbedel, Ugur; Grund, Thomas; Lampke, Thomas)

Investigation of the Tribological Behaviour of PTFE Composites Reinforced with Bronze Particles Using the Taguchi Method (Ficici, Ferit; Özdemir, Ismail*; Grund, Thomas; Lampke, Thomas)

Characterisation of ZnO-doped hydroxyapatite coatings on PEEK produced by a hybrid plasma spraying process for biomedical applications (Xu, Jun; Pfuch, Andreas; Seemann, Thomas; Fröhlich, Frank; Schweder, Martina; Lampke, Thomas*)

Surface Functionalisation of Novel Work-Hardening Multi-Principal-Element Alloys by Ultrasonic-Assisted Milling (Preuß, Bianca*; Lindner, Thomas; Hanisch, Niclas; Giese, Marcel; Schröpfer, Dirk; Richter, Tim; Rhode, Michael; Lampke, Thomas)

Wear and corrosion properties of low-temperature nitrocarburised 17-4PH SLM components (Wang, Zechen*; Grimm, Maximilian; Lindner, Thomas; Schubert, Frank; Winkler, Kerstin; Berger, Robin; Lampke, Thomas)

Quantitative design criterion for the functionalisation of mechanical interfaces with regard to adhesion strength in chemically pre-treated polymer-metal hybrids using fractal dimension (Hanisch, Niclas*; Dittes, Axel; Steinert, Philipp; Liborius, Hendrik; Lindner, Thomas; Schubert, Andreas; Lampke, Thomas)

Human-CoMo: A combination of cognitive knowledge engineering and data modelling for human-cyber-physical systems in intelligent manufacturing (Bocklisch, Franziska*; Lampke, Thomas)

Enhanced Wear Resistance of Gas-Nitrided AISI 431 HVOF Coatings at Elevated Temperatures (Hanisch, Niclas*; Saborowski, Erik; Lindner, Thomas; Preuß, Bianca; Tchinou, Serge; Börner, K.; Lampke, Thomas)

Experimental and Finite Element Analysis of the Influence of Impact Loads on the Moment Transmission of Smooth Shaft–Hub Connections (Härtel, Markus*; Le Duc, Loc*; Grund, Thomas; Suchy, Lukas; Lampke, Thomas; Hasse, Alexander)

Development of solid lubricant-modified, self-flowing alloys to reduce the coefficient of friction (Preuß, Bianca*; Lampke, Thomas)

Run-in behaviour of tribologically stressed surfaces – a new method for evaluating and predicting the run-in time (Hirsch, Sarah Johanna*; Lampke, Thomas)

Pin-Shaped Surface Structures Generated by Single-Pulse Laser Drilling for High-Strength Interfaces in Thermally Joined Polymer-Metal Hybrids (Saborowski, Erik*; Steinert, Philipp; Lindner, Thomas; Schubert, Andreas; Lampke, Thomas)

Investigation of the Tribological Behaviour of Various AMC Surfaces in Relation to Brake Lining Material (Hirsch, Sarah Johanna*; Eiselt, Patrick; Ozdemir, Ismail; Grund, Thomas; Nestler, Andreas; Lampke, Thomas; Schubert, Andreas)

How the level of automation influences the moral decisions of humans working alongside industrial robots in different scenarios (Eich, Anne; Klichowicz, Anja; Bocklisch, Franziska*)

Microstructural Evolution and Wear Resistance of the Eutectic High-Entropy Alloy Al₀.₃CoCrFeNiNb₀.₅ Produced by Laser Metal Deposition (Preuß, Bianca*; Lindner, Thomas; Uhlig, Thomas; Tapia Cabrera, Jorge Eduardo; Schwarz, Holger; Wagner, Guntram; Seyller, Thomas; Lampke, Thomas)

Towards Closed-Loop Recycling of Ceramic Particle-Reinforced Aluminium Alloys: A Comparative Study of Resistance-Heating Sintered Primary and Solid-State Recycled Secondary SiCp/AlSi7Mg Composites (Hirsch, Sarah Johanna*; Grund, Thomas; Lampke, Thomas)

Analytical Models for Determining the Grain Size of Metallic Coatings and Machined Surface Layers Using the Four-Point Probe Method (Mehner, Thomas*; Lampke, Thomas)

Humans and cyber-physical systems as teammates? Characteristics and applicability of the human-machine-teaming concept in intelligent manufacturing (Bocklisch, Franziska*; Huchler, Norbert)

Niobium and Molybdenum as Alloying Constituents in Al₀.₃CoCrFeNi for the Development of Eutectic High-Entropy Alloys for HVOF Spraying (Preuß, Bianca*; Lindner, Thomas; Uhlig, Thomas; Wagner, Guntram; Lampke, Thomas)

To Share or Not to Share – Expected Changes in Mode of Transport Given Different Types of Fully Automated Vehicles (Heubeck, Laura; Hartwich, Franziska; Bocklisch, Franziska*)

Wear and Corrosion Behaviour of Cold-Sprayed Cu-10Sn Coatings (Özdemir, Ismail*; Bulbul, Bahattin; Grund, Thomas; Lampke, Thomas)

Microstructures and property profiles of (Al,Cr,Ti)₂₀₃ solid solution coatings produced by atmospheric plasma spraying (Grimm, Maximilian*; Conze, Susan; Berger, Lutz-Michael; Thiele, Sven; Lindner, Thomas; Lampke, Thomas)

Quasi-Non-Destructive Quality Assessment of Thermally Sprayed AlSi 316L Coatings Using Polarisation Measurements in a 3.5% NaCl Gel Electrolyte (Grimm, Maximilian*; Kutschmann, Pia; Pluta, Christian; Schwabe, Olga; Lindner, Thomas; Lampke, Thomas)

Specification of parasitic electrochemical sub-processes during plasma electrolytic oxidation of magnesium (Simchen, Frank*; Schwöbel, Stephan Daniel; Mehner, Thomas; Lampke, Thomas)

Passivation and pH-Induced Precipitation during Anodic Polarisation of Steel in Aluminate Electrolytes as a Precondition for Plasma Electrolytic Oxidation (Morgenstern, Roy*; Albero Rojas, Claudia; Simchen, Frank; Meinhold, Vanessa; Mehner, Thomas; Lampke, Thomas)

Improved high-temperature wear behaviour of high-speed laser metal-deposited Al₀.₃CrFeCoNi coatings alloyed with Nb and Mo (Rymer, Lisa-Marie*; Lindner, Thomas; Lampke, Thomas)

Fatigue Resistance of an Anodised and Hard-Anodised 6082 Aluminium Alloy as a Function of Coating Thickness in the High-Cycle Regime (Winter, Lisa*; Lampke, Thomas)

Fracture behaviour of plasma electrolytic oxide coatings on an aluminium substrate as determined by acoustic emission (Albero Rojas, Claudia*; Simchen, Frank; Winter, Lisa; Rymer, Lisa-Marie; Lampke, Thomas)

The Influence of Design on Stress Concentration Reduction in Dental Implant Systems Using the Finite Element Method (Pala, Eser; Özdemir, Ismail*; Grund, Thomas; Lampke, Thomas)

Non-metallic alloying constituents for the development of a wear-resistant CrFeNi-BSiC high-entropy alloy for surface protective coatings produced by thermal spraying and high-speed laser metal deposition (Lindner, Thomas*; Preuß, Bianca; Löbel, Martin; Rymer, Lisa-Marie; Grimm, Maximilian; Schwarz, Holger; Seyller, Thomas; Lampke, Thomas)

Influence of Aluminium and Molybdenum on the Microstructure and Corrosion Behaviour of Thermally Sprayed High-Entropy Alloy Coatings (Löbel, Martin*; Lindner, Thomas; Grimm, Maximilian; Rymer, Lisa-Marie; Lampke, Thomas)

Microstructure and Corrosion Properties of AlCrFeCoNi High-Entropy Alloy Coatings Prepared by HVAF and HVOF (Löbel, Martin*; Lindner, Thomas; Mehner, Thomas; Rymer, Lisa-Marie; Björklund, Stefan; Joshi, Shrikant; Lampke, Thomas)

Electrodeposition of Thick, Crack-Free Fe-Cr-Ni Coatings from a Cr(III) Electrolyte (Meinhold, Vanessa*; Höhlich, Dominik; Mehner, Thomas; Lampke, Thomas)

Mathematical Modelling of the Limiting Current Density in Diffusion-Reaction Systems (Schwoebel, Stephan Daniel*; Mueller, Markus; Mehner, Thomas; Lampke, Thomas)

Comparison of Aqueous and Gelled 3.5% NaCl Electrolytes for Assessing the Corrosion Resistance of Thermal Spray Stainless-Steel Coatings in Electrochemical Corrosion Tests (Kutschmann, Pia*; Grimm, Maximilian; Lindner, Thomas; Ernst, Kerstin Raffaela; Schwabe, Olga; Pluta, Christian; Lampke, Thomas)

Heat Treatment: Its Effect on the Porosity and Tensile Properties of Field-Assisted Sintered AlSi7Mg0.6 (Hirsch, Sarah Johanna*; Winter, Lisa; Grund, Thomas; Lampke, Thomas)

Evolution of the Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel (Landgraf, Pierre*; Bergelt, Tim; Rymer, Lisa-Marie; Kipp, Christian; Grund, Thomas; Bräuer, Günter; Lampke, Thomas)

Effects of Laser Remelting on the Microstructure, Hardness and Resistance to Oscillating Wear of Atmospheric Plasma-Sprayed Alumina-Rich Coatings (Grimm, Maximilian*; Lindner, Thomas; Lampke, Thomas)

High-Speed Laser Metal Deposition of CrFeCoNi and AlCrFeCoNi HEA Coatings with a Narrow Intermixing Zone and Their Machining by Turning and Diamond Smoothing (Lindner, Thomas*; Liborius, Hendrik; Töberling, Gerd; Vogt, Sabrina; Preuß, Bianca; Rymer, Lisa-Marie; Schubert, Andreas; Lampke, Thomas)

Influence of Hydrothermal Sealing on the High-Cycle Fatigue Behaviour of the Anodised 6082 Aluminium Alloy (Winter, Lisa*; Lampke, Thomas)

Dissolution Behaviour of Different Alumina Phases within Plasma Electrolytic Oxidation Coatings (Simchen, Frank*; Morgenstern, Roy; Clauß, Steffen; Mehner, Thomas; Lampke, Thomas)

The Effect of Silicate and Hydroxide Concentrations on the Properties of Al₂O₃-TiO₂ PEO Composite Coatings on AA7075 Alloy (Hashemzadeh, Mehri*; Raeissi, Keyvan*; Ashrafizadeh, Fakhreddin; Hakimizad, Amin; Santamaria, Monica; Lampke, Thomas)

Cold Gas Spraying of Solution-Hardened 316L Grade Stainless Steel Powder (Lindner, Thomas*; Löbel, Martin; Grimm, Maximilian; Fiebig, Jochen)

Integrating human cognition into cyber-physical systems: A multidimensional fuzzy pattern model with application to thermal spraying (Bocklisch, Franziska*; Paczkowski, Gerd; Zimmermann, Stephan; Lampke, Thomas)

Enhanced Abrasion Resistance of Spark Plasma Sintered and HVOF-Sprayed Hadfield High-Manganese Steel through Turning and Diamond Smoothing (Lindner, Thomas*; Liborius, Hendrik; Preuß, Bianca; Hanisch, Niclas; Schubert, Andreas; Lampke, Thomas)

Niobium and Molybdenum as Alloying Constituents in Al₀.₃CoCrFeNi for the Development of Eutectic High-Entropy Alloys for HVOF Spraying (Preuß, Bianca*; Lindner, Thomas; Uhlig, Thomas; Wagner, Guntram; Lampke, Thomas)

Modelling of layer development and nitrogen distribution in different microstructures during plasma nitriding (Bergelt, Tim*; Landgraf, Pierre; Grund, Thomas; Bräuer, G.; Lampke, Thomas)

Influence of the Current Regime during Electrodeposition in a Cr(III)-Containing Fe-Cr-Ni Electrolyte on the Near-Surface pH, Alloy Composition, and Microcrack Behaviour (Meinhold, Vanessa; Höhlich, Dominik*; Mehner, Thomas; Lampke, Thomas)

Knowledge matters! – Exploring the drivers and barriers to the acceptance of FCEVs as a sustainable mobility solution (Kreißig, Isabel*; Bocklisch, Franziska*)

Nb and Mo: Their Influence on the High-Temperature Wear Behaviour of HVOF-Sprayed High-Entropy Alloy Coatings (Rymer, Lisa-Marie*; Lindner, Thomas; Lampke, Thomas)

Influence of finish machining by turning and diamond smoothing on the tribological properties of Fe17Cr2Ni0.2C thermally sprayed coatings (Liborius, Hendrik; Grund, Thomas*; Nestler, Andreas; Paczkowski, Gerd; Schubert, Andreas; Lampke, Thomas)

Influence of Pre-Ageing on the Artificial Ageing Behaviour of a 6056 Aluminium Alloy following Conventional Extrusion (Winter, Lisa*; Hockauf, Kristin; Scholze, Mario; Hellmig, Ralph Jörg; Lampke, Thomas)

Irregular Electrodeposition of Cu-Sn Alloy Coatings in [EMIM]Cl Outside the Glove Box with a Large Layer Thickness (Lehmann, Lars*; Höhlich, Dominik; Mehner, Thomas; Lampke, Thomas)

On a Robust and Efficient Numerical Scheme for the Simulation of Stationary 3-Component Systems with Non-Negative Species Concentrations, with an Application to Cu Deposition from a Cu-(β-alanine) Electrolyte (Schwoebel, Stephan Daniel*; Mehner, Thomas; Lampke, Thomas)

Enhancement of the Adhesion of Wire Arc Sprayed Coatings to Carbon Fibre-Reinforced Plastic through Surface Laser Structuring (Gustke, Kevin*; Gebauer, Jana; Drehmann, Rico; Lasagni, Andrés Fabián; Lampke, Thomas)

Nickel-aluminium thermal spray coatings as adhesion promoters and substrates for inductively joined polymer-metal hybrids (Saborowski, Erik*; Dittes, Axel; Lindner, Thomas; Lampke, Thomas)

Stabilisation of the Calculation of Stability Constants and Species Distributions from Titration Curves (Schwoebel, Stephan Daniel*; Höhlich, Dominik; Mehner, Thomas; Lampke, Thomas)

Prediction of residual stress depth profiles in the turning of EN AW-2017 based on in-process measurements of machining forces and temperatures (Mehner, Thomas*; Junge, Thomas; Schubert, Andreas; Lampke, Thomas)

Jominy End Quench Test on Martensitic Stainless Steel X30Cr13 (Landgraf, Pierre*; Birnbaum, Peter; Meza-García, Enrique; Grund, Thomas; Kräusel, Verena; Lampke, Thomas)

Suitability of roughness parameters for predicting the interlaminar strength of mechanically interlocked polymer-metal interfaces (Saborowski, Erik*; Steinert, Philipp; Dittes, Axel; Lindner, Thomas; Schubert, Andreas; Lampke, Thomas)

Influence of Thermochemical Treatment on the Surface Properties of Finish-Turned Wire Arc-Sprayed 17Cr Steel Coatings (Kutschmann, Pia*; Lindner, Thomas; Liborius, Hendrik; Grund, Thomas; Schubert, Andreas; Lampke, Thomas)

Experimental and Numerical Investigations into Magnetic Pulse Welding of Aluminium Alloy 6016 to Hardened Steel 22MnB5 (Drehmann, Rico*; Scheffler, Christian; Winter, Sven; Psyk, Verena; Kräusel, Verena; Lampke, Thomas)

Microstructure and Wear Behaviour of the High-Velocity Oxygen-Fuel Sprayed and Spark Plasma Sintered High-Entropy Alloy AlCrFeCoNi (Löbel, Martin*; Lindner, Thomas; Clauß, Steffen; Pippig, Robert; Dietrich, Dagmar; Lampke, Thomas)

The effect of artificial ageing time on the crack propagation behaviour of aluminium alloy 6060 processed by equal-channel angular pressing (Rymer, Lisa-Marie*; Winter, Lisa; Hockauf, Kristin; Lampke, Thomas)

Electrodeposition of FeCrNi and FeCr alloys and the effect of heat treatment on microstructure and composition (Meinhold, Vanessa*; Höhlich, Dominik; Dittes, Axel; Mehner, Thomas; Lampke, Thomas)

Electrolyte design and characterisation of REACh-compliant Zn-W and Zn-W-Cu electrodeposits (Morgenstern, Roy*; Müller, M.; Höhlich, Dominik; Mehner, Thomas; Lampke, Thomas)

Conversion layers formed by plasma-electrolytic oxidation of aluminium in acrylate and benzoate electrolytes (Morgenstern, Roy*; Selyshchev, Oleksandr; Mehner, Thomas; Lampke, Thomas; Zahn, Dietrich R. T.; Goedel, W.A.; Schreckenbach, J.)

Mathematical modelling and simulation of the dissolution of zinc anodes in industrial electroplating (Schwöbel, Stephan Daniel*; Meinhold, Vanessa; Mehner, Thomas; Lampke, Thomas)

Formation of corundum-rich alumina coatings on low-carbon steel by plasma electrolytic oxidation (Simchen, Frank*; Masoud-Nia, N.; Mehner, Thomas; Lampke, Thomas)

Influence of the production route on the phase formation, microstructure and wear behaviour of the high-entropy alloy AlCoCrFeNiTi0.5 (Löbel, Martin*; Lindner, Thomas; Lampke, Thomas)

The chemical structure of amino-terminated alkyl silanes and its influence on the strength of aluminium-polyamide joints (Dittes, Axel*; Scharf, Ingolf; Lehmann, Lars; Saborowski, Erik; Mehner, Thomas; Lampke, Thomas)

Influence of the particle size of the metal matrix powder on the tensile strength of a SiCp/AlSi7Mg0.6 composite produced by the field-assisted sintering technique (Pippig, Robert*; Hirsch, Sarah Johanna*; Grund, Thomas*; Lampke, Thomas*)

Effects of high-temperature treatment on the microstructure and properties of a plasma-sprayed coating comprising 25 mol% Al₂O₃, 25 mol% Cr₂O₃ and 50 mol% TiO₂ (Grimm, Maximilian*; Conze, S.; Berger, L.-M.; Drehmann, Rico; Lampke, Thomas)

Influence of the wire diameter and particle fraction of Fe-Al₂O₃/ZrO₂ flux-cored wires processed by wire arc spraying on the abrasive wear properties of the coating (Gustke, Kevin*; Drehmann, Rico; Lampke, Thomas)

Electrochemical testing of thermal spray coatings using gel electrolytes (Kutschmann, Pia*; Lindner, Thomas; Grimm, Maximilian; Lampke, Thomas)

High-temperature wear behaviour of borided Inconel 718 HVOF coatings (Löbel, Martin*; Lindner, Thomas; Hanisch, Niklas; Lampke, Thomas)

A combined experimental and simulation study of the influence of polymer moisture content on the strength of amino-silane-mediated aluminium-polyamide 6 joints (Kießling, R.; Dittes, Axel*; Lampke, Thomas; Ihlemann, Jörn)

Introduction to Plasma Electrolytic Oxidation – An Overview of the Process and Applications (Simchen, Frank*; Sieber, Maximilian; Kopp, Alexander; Lampke, Thomas)

On the Q&P Potential of a Commercial Spring Steel (Härtel, Markus*; Wilke, Alisa*; Dieck, Sebastian; Landgraf, Pierre; Grund, Thomas; Lampke, Thomas; Neukirchner, Heiko; Halle, Thorsten; Wappler, Sebastian)

Influence of Pre-Ageing on the Hardness and Formability of a Thread-Rolled 6056 Aluminium Alloy following Conventional Extrusion and Artificial Ageing (Winter, Lisa*; Hellmig, Ralph Jörg; Hockauf, Kristin; Lampke, Thomas)

Microstructure and Properties of Atmospheric Plasma-Sprayed (Al,Cr)₂O₃–TiO₂ Coatings from Blends (Grimm, Maximilian*; Conze, Susan; Berger, Lutz-Michael; Drehmann, Rico; Lampke, Thomas)

Boriding of Laser-Clad Inconel 718 Coatings to Improve Wear Resistance (Lindner, Thomas*; Günen, Ali; Töberling, Gerd; Vogt, Sabrina; Karakas, Mustafa Serdar; Löbel, Martin; Lampke, Thomas)

Strain-Rate-Sensitive Deformation Behaviour under Tension and Compression of Al₀.₃CrFeCoNiMo₀.₂ (Rymer, Lisa-Marie*; Frint, Philipp; Lindner, Thomas; Gebel, G.; Löbel, Martin; Lampke, Thomas)

Microstructure and Sliding Wear Resistance of Plasma-Sprayed Al₂O₃-Cr₂O₃-TiO₂ Ternary Coatings from Blends of Individual Oxides (Grimm, Maximilian*; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Lindner, Thomas; Lampke, Thomas)

Wear and Corrosion Behaviour of Supersaturated Surface Layers in the High-Entropy Alloy Systems CrMnFeCoNi and CrFeCoNi (Lindner, Thomas*; Löbel, Martin; Saborowski, Erik; Rymer, Lisa-Marie; Lampke, Thomas)

Introducing Fractal Dimension for the Assessment of Interlaminar Shear and Tensile Strength at Mechanically Interlocked Polymer–Metal Interfaces (Saborowski, Erik*; Steinert, Philipp; Dittes, Axel; Lindner, Thomas; Schubert, Andreas; Lampke, Thomas)

Simultaneous Electrodeposition of Silver and Tungsten from [EMIm]Cl:AlCl₃ Ionic Liquids outside the Glove Box (Höhlich, Dominik*; Mehner, Thomas; Scharf, Ingolf; Lampke, Thomas)

Introduction to Plasma Electrolytic Oxidation: An Overview of the Process and Applications (Simchen, Frank*; Sieber, Maximilian; Kopp, Alexander; Lampke, Thomas)

The influence of equal-channel angular pressing on the mean stress sensitivity in the high-cycle fatigue regime of the 6082 aluminium alloy (Winter, Lisa*; Hockauf, Kristin; Winter, Sven; Lampke, Thomas)

High-temperature wear behaviour of AlCoCrFeNiTi0.5 coatings produced by HVOF (Löbel, Martin*; Lindner, Thomas; Lampke, Thomas)

A Method for Characterising the Passivation Mechanisms during the Pre-discharge Stage of Plasma Electrolytic Oxidation, Indicating the Mode of Action of Fluorides in the Plasma Electrolytic Oxidation of Magnesium (Simchen, Frank*; Sieber, Maximilian; Mehner, Thomas; Lampke, Thomas)

Precipitation Hardening of the HVOF-Sprayed Single-Phase High-Entropy Alloy CrFeCoNi (Löbel, Martin*; Lindner, Thomas; Hunger, Ralph; Berger, Robin; Lampke, Thomas)

Boriding of HVOF-sprayed Inconel 625 coatings (Lindner, Thomas*; Löbel, Martin; Hunger, Ralph; Berger, Robin; Lampke, Thomas)

Changes in the Coating Composition Due to APS Process Conditions in Al₂O₃-Cr₂O₃-TiO₂ Ternary Powder Blends (Grimm, Maximilian*; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Drehmann, Rico; Lampke, Thomas)

Designing (Ultra)Fine-Grained High-Entropy Alloys by Spark Plasma Sintering and Equal-Channel Angular Pressing (Rymer, Lisa-Marie*; Lindner, Thomas; Frint, Philipp; Löbel, Martin; Lampke, Thomas)

Analytical Model for Calculating the Grain Size of Bulk Material Based on Its Electrical Resistance (Mehner, Thomas*; Uland, Morgan; Lampke, Thomas)

High-temperature wear behaviour of AlCoCrFeNiTi0.5 coatings produced by HVOF (Löbel, Martin*; Lindner, Thomas; Lampke, Thomas)

Determination of the strength of polymer-metal interfaces under mixed-mode loading using butt-bonded hollow cylinders (Saborowski, Erik*; Kießling, Robert; Dittes, Axel; Paczkowski, Gerd; Ihlemann, Jörn; Lampke, Thomas)

Mechanisms of fatigue crack propagation in Q&P-processed steel (Hockauf, Kristin*; Wagner, Martin Franz-Xaver; Masek, Bohuslav; Lampke, Thomas)

Effect of adjusted gas nitriding parameters on the microstructure and wear resistance of HVOF-sprayed AISI 316L coatings (Kutschmann, Pia*; Lindner, Thomas; Lampke, Thomas)

High-Temperature Wear Behaviour of Spark Plasma Sintered AlCoCrFeNiTi₀.₅ High-Entropy Alloy (Löbel, Martin*; Lindner, Thomas; Pippig, Robert; Lampke, Thomas)

Localised anodising of the EN AW-7075 T6 aluminium alloy using a closed electrolytic free jet (Morgenstern, R.*; Martin, A.; Lehnert, N.; Scharf, I.; Hackert-Oschätzchen, M.; Schubert, A.; Lampke, Thomas)

Effect of metal surface topography on the interlaminar shear and tensile strength of aluminium/polyamide 6 polymer-metal hybrids (Saborowski, Erik*; Dittes, Axel; Steinert, Philipp; Lindner, Thomas; Scharf, Ingolf; Schubert, Andreas; Lampke, Thomas)

Hydrogen embrittlement of a quenching and partitioning steel during corrosion and zinc electroplating (Mehner, Thomas*; Scharf, Ingolf; Frint, Philipp; Masek, Bohuslav; Wagner, Martin F.-X.; Lampke, Thomas)

Neural network for predicting hardness profiles in steel alloys following plasma nitriding (Pribbenow, Jörg*; Mejauschek, M.; Landgraf, Pierre; Grund, Thomas; Bräuer, G.; Lampke, Thomas)

Pitting corrosion behaviour of a laser-hardened, high-alloy steel (Mehner, Thomas*; Landgraf, Pierre; Haack, E.; Scharf, Ingolf; Grund, Thomas; Lampke, Thomas)

Influence of heat treatment prior to plastic deformation on the ageing behaviour and hardness of aluminium alloy 6056 (Winter, Lisa*; Einer, F.; Geisler, C.; Hellmig, R. J.; Hockauf, Kristin; Lampke, Thomas)

Mean stress sensitivity of the fatigue strength following equal-channel angular pressing of aluminium alloys 6082 and 6060 (Winter, Lisa*; Hockauf, Kristin; Lampke, Thomas)

Finish Turning of FeCr17Ni2C0.2 Iron-based Sprayed Coatings: The Effects of Substrate Preparation, Cutting Speed and Feed Rate on the Coating and Surface Properties (Grund, Thomas*; Paczkowski, Gerd; Lampke, Thomas; Liborius, Hendrik; Nestler, Andreas; Schubert, Andreas)

Mechanically induced grain refinement, recovery and recrystallisation of cold-sprayed iron aluminide coatings (Cinca, Núria; Drehmann, Rico*; Dietrich, Dagmar; Gärtner, Frank; Klassen, Thomas; Lampke, Thomas; Guilemany, Jose Maria)

Concepts for interface engineering and characterisation in composite hybrid structures (Serna, J.; Zinn, C.; Scharf, Ingolf; Schmidt, C.; Schwöbel, Stephan Daniel; Meiners, D.; Schaper, M.; Lampke, Thomas; Dittes, Axel*)

Influence of titanium on the microstructure, phase formation and wear behaviour of AlCoCrFeNiTix high-entropy alloy (Löbel, Martin*; Lindner, Thomas; Mehner, Thomas; Lampke, Thomas)

Enhanced Wear Behaviour of Spark Plasma Sintered AlCoCrFeNiTi High-Entropy Alloy Composites (Löbel, Martin*; Lindner, Thomas; Lampke, Thomas)

The Influence of Temperature and Particle Size on the High-Cycle Fatigue Behaviour of the SiC-Reinforced 2124 Aluminium Alloy (Winter, Lisa*; Hockauf, Kristin; Lampke, Thomas)

Heat treatment conditions for EN AW-7075 affecting the anodic oxidation process and coating properties (Morgenstern, Roy*; Scharf, Ingolf; Lampke, Thomas)

Corrosion characteristics of a quenching and partitioning steel determined by electrochemical impedance spectroscopy (Lampke, Thomas; Mehner, Thomas*; Morgenstern, Roy; Frint, Philipp; Scharf, Ingolf; Wagner, Martin F.-X.)

Non-destructive analysis of pitting corrosion characteristics in EN AW-2024-T3 using 3D optical pattern profilometry (Schmidl, Eric; Pippig, Robert*; Morgenstern, Roy; Lampke, Thomas; Scharf, Ingolf)

Plasma Electrolytic Oxidation of High-Strength Aluminium Alloys – The Effect of the Substrate on Wear and Corrosion Performance (Sieber, Maximilian; Simchen, Frank*; Morgenstern, Roy; Scharf, Ingolf; Lampke, Thomas)

Hardening of HVOF-sprayed austenitic stainless-steel coatings by gas nitriding (Lindner, Thomas*; Kutschmann, Pia; Löbel, Martin; Lampke, Thomas)

Thermal Spray Coatings as an Adhesion Promoter in Metal/FRP Joints (Lindner, Thomas*; Saborowski, Erik; Scholze, Mario; Zillmann, Benjamin; Lampke, Thomas)

Arc Brazing of Aluminium, Aluminium Matrix Composites and Stainless Steel in Dissimilar Joints (Grund, Thomas*; Gester, Andreas; Wagner, Guntram; Habisch, Stefan; Mayr, Peter)

Key Factors Affecting the Bond Strength of Cold-Sprayed Aluminium Coatings on Ceramic Substrates (Drehmann, Rico*; Grund, Thomas; Lampke, Thomas; Wielage, Bernhard; Wüstefeld, C.; Motylenko, M.; Rafaja, D.)

High-cycle fatigue behaviour of the severely plastically deformed 6082 aluminium alloy with an anodic and plasma electrolytic oxide coating (Winter, Lisa*; Hockauf, Kristin; Lampke, Thomas)

Effect of the Addition of Nitric and Oxalic Acid on the Hard Anodising of AlCu4Mg1 in Sulphuric Acid (Sieber, Maximilian; Morgenstern, Roy*; Scharf, Ingolf; Lampke, Thomas)

Evolution of residual stress in cold-rolled DC04 steel sheets under different initial stress conditions (Mehner, Thomas*; Bauer, Alexander; Härtel, Sebastian; Awiszus, Birgit; Lampke, Thomas)

Characterisation of thermally sprayed copper and numerically supported residual stress determination using the incremental hole-drilling method (Winkler, Ruben*; Saborowski, Erik; Paczkowski, Gerd; Grund, Thomas; Lampke, Thomas)

Phase Stability and Microstructural Evolution of Solution-Hardened 316L Powder Feedstock for Thermal Spraying (Lindner, Thomas*; Löbel, Martin; Lampke, Thomas)

Surface hardening of an FCC-phase high-entropy alloy system by powder-pack boriding (Lindner, Thomas*; Löbel, Martin; Sattler, Benjamin; Lampke, Thomas)

Microstructure and Wear Resistance of AlCoCrFeNiTi High-Entropy Alloy Coatings Produced by HVOF (Löbel, Martin*; Lindner, Thomas; Mehner, Thomas; Lampke, Thomas)

Downscaled anodic oxidation process for aluminium in oxalic acid (Sieber, Maximilian; Morgenstern, Roy*; Kuhn, Danny; Hackert-Oschätzchen, Matthias; Schubert, Andreas; Lampke, Thomas)

Archaeometric case studies on the decoration of pre-Columbian pottery using X-ray spectroscopy maps and profiles (Dietrich, Dagmar*; Mehner, Thomas; Del-Solar-Velarde, N.; Nickel, Daniela; Lampke, Thomas; Chapoulie, R.; Castillo Butters, L. J.)

The potential of EBSD and EDS for the investigation of ceramics – case studies on sherds of pre-Columbian pottery (Dietrich, Dagmar*; Nolze, G.; Del-Solar-Velarde, N.; Nickel, Daniela; Lampke, Thomas; Chapoulie, R.; Castillo Butters, L. J.)

The influence of electrolytes on the initiation of plasma electrolytic oxidation processes on light metals (Simchen, Frank*; Sieber, Maximilian; Lampke, Thomas)

Influence of Hardener Content and Curing Parameters on the Microstructure and Mechanical Properties of Porous C/C Composites (Todt, Andreas*; Roder, Kristina; Nier, Natalia; Wielage, Bernhard; Wagner, Guntram; Nestler, Daisy)

Anodic oxidation of AlMgSi1 – Mechanical properties of the coatings, process costs and energy consumption during oxide formation (Sieber, Maximilian*; Scharf, Ingolf; Herold, Franziska; Schmidt, Anja; Böttger, Dagmar; Böttger, Sebastian; Böttger, Eckhard; Götze, Uwe; Lampke, Thomas)

Formation of a Spinel Coating on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation (Sieber, Maximilian*; Simchen, Frank; Scharf, Ingolf; Lampke, Thomas)

Plasma electrolytic polishing of metallised carbon fibres (Böttger-Hiller, Falko*; Nestler, K.; Zeidler, H.; Glowa, G.; Lampke, Thomas)

High-Temperature Corrosion and Radiation Characteristics of Thermal-Sprayed Molybdenum Disilicide-Based Coatings (Weis, Sebastian*; Uhlig, Thomas; Wagner, Guntram; Lampke, Thomas*; Bauer, Wolfgang*; Moldenhauer, A.)

Deformation behaviour of FRP-metal composites locally reinforced with carbon fibres (Scholze, Mario*; Kolonko, Angelika*; Lindner, Thomas; Lampke, Thomas; Helbig, Frank)

Anodising with dynamic current control for customised alumina coatings (Sieber, Maximilian*; Althöfer, I.; Höhlich, Dominik; Scharf, Ingolf; Böttger, D.; Böttger, S.; Böttger, Eckhard; Lampke, Thomas)

Prediction of Austenite Formation Temperatures Using Artificial Neural Networks (Schulze, Pierre*; Schmidl, Eric; Grund, Thomas; Lampke, Thomas)

The effect of plasma electrolytic oxidation on the mean stress sensitivity of the fatigue life of the 6082 aluminium alloy (Winter, Lisa*; Morgenstern, Roy; Hockauf, Kristin; Lampke, Thomas)

Plasma electrolytic oxidation of AMCs (Morgenstern, Roy*; Sieber, Maximilian; Lampke, Thomas)

Surface modification of austenitic thermal-spray coatings by low-temperature nitrocarburising (Lindner, Thomas*; Mehner, Thomas; Lampke, Thomas)

Anodic oxidation of the AlCu4Mg1 aluminium alloy using dynamic current control (Sieber, Maximilian*; Morgenstern, Roy; Lampke, Thomas)

In-plane biaxial compression and tension testing of thin sheet materials (Zillmann, Benjamin*; Wagner, Martin F.-X.; Schmaltz, Stefan; Schmidl, Eric; Lampke, Thomas; Willner, Kai; Halle, Thorsten)

Corrosion protection of Al/Mg compounds by simultaneous plasma electrolytic oxidation (Sieber, Maximilian*; Morgenstern, Roy; Nickel, Daniela; Scharf, Ingolf; Alisch, Gert; Förster, Wolfgang; Binotsch, Carolin; Awiszus, Birgit; Lampke, Thomas)

A comparative study of hydrogen embrittlement in palladium deposits formed in ionic liquids and aqueous electrolytes (Mehner, Thomas*; Nickel, Daniela; Nehrkorn, Sissy; Yulinova, Alexandra; Pügner, Marc; Scharf, Ingolf; Lanzinger, Gloria; Böck, Reinhard; Lampke, Thomas)

Co-deposition behaviour of alumina nanoparticles and properties of Ni-Al₂O₃ nanocomposite coatings (Sadeghi, Amir*; Sieber, Maximilian; Scharf, Ingolf; Lampke, Thomas)

Separation of parameters affecting the corrosion behaviour of formed products – a new strategy using X-ray diffraction and corrosion tests under in-situ tensile loading (Mehner, Thomas*; Bauer, Alexander; Nickel, Daniela; Binotsch, Carolin; Awiszus, Birgit; Lampke, Thomas)

Effect of Strain Localisation on Pitting Corrosion of an AlMgSi0.5 Alloy (Nickel, Daniela; Dietrich, Dagmar*; Mehner, Thomas; Frint, Philipp; Spieler, Dagobert; Lampke, Thomas)

Influence of Particulate Reinforcement and Equal-Channel Angular Pressing on Fatigue Crack Growth in an Aluminium Alloy (Köhler, Lisa*; Hockauf, Kristin; Lampke, Thomas)

A Novel Adhesion Promoter for Metal-Plastic Composites (Yulinova, Alexandra*; Göring, Mandy; Nickel, Daniela; Spange, Stefan; Lampke, Thomas)

Interface Characterisation and Bonding Mechanisms of Cold Gas-Sprayed Al Coatings on Ceramic Substrates (Drehmann, Rico*; Grund, Thomas; Lampke, Thomas; Wielage, Bernhard; Manygoats, K.; Schucknecht, T.; Rafaja, D.)

Electrically conductive carbon fibre-reinforced plastics (CFRP) with an exposed functional layer (Böttger-Hiller, Falko*; Jahn, P.; Trautmann, Maik; Lindner, Thomas; Nickel, Daniela; Lampke, Thomas)

Heat flux and temperature distribution in gear hobbing operations (Stark, Sibylle*; Beutner, Martin; Lorenz, Falk; Uhlmann, S.; Karpuschewski, Bernhard; Halle, Thorsten)

Effect of additive and current mode on the surface morphology of palladium films deposited from a non-aqueous deep eutectic solution (DES) (Böck, Reinhard*; Lanzinger, Gloria; Freudenberger, Renate; Mehner, Thomas*; Nickel, Daniela; Scharf, Ingolf; Lampke, Thomas)

Cyclic behaviour and microstructural stability of ultrafine-grained AA6060 under strain-controlled fatigue (Hockauf, Kristin*; Niendorf, Thomas; Wagner, Swetlana; Halle, Thorsten; Meyer, Lothar Werner)