Publications of the professorship Machine Elements and Product Development
| Nr. |
Title |
Type |
Author |
Year |
ResearchGate |
| 1 | Design-Related Sustainability Assessment | Conference contribution, refereed | Nettlenbusch, Lisa-Marie et al. | 2024 | |
| 2 | A Review on Sensor-Integrating Machine Elements | Article in trade journal, refereed | Kirchner, Eckhard* et al. | 2024 | |
| 3 | Simulation of the local CoF development in cyclically loaded clamped contact surfaces (fretting) | Conference contribution, not refereed | Oehme, Silvano et al. | 2024 | |
| 4 | The Influence of Reverse Yielding on the Plastic Conditioning of Interference Fits in Power Transmission Engineering | Article in trade journal, refereed | Schierz, Mario et al. | 2024 | |
| 5 | User Study to Validate the Performance of an Offline Robot Programming Method That Enables Robot-Independent Kinesthetic Instruction through the Use of Augmented Reality and Motion Capturing | Article in trade journal, refereed | Müller, Fabian* et al. | 2024 | |
| 6 | Fretting fatigue of cast iron and aluminium - A strength assessment method based on a worst-case assumption | Article in trade journal, refereed | Knabner, Denny* et al. | 2024 | |
| 7 | Investigations into increasing the fatigue strength of shafts by deep rolling | Article in trade journal, refereed | Günther, Stefanie* et al. | 2024 | |
| 8 | Plastic conditioning to increase the Volume utility value of friction-locked shaft-hub connecting elements | Article in trade journal, refereed | Schierz, Mario et al. | 2024 | |
| 9 | Development of a measurement system to determine the circumferential force on a feather key | Article in trade journal, refereed | Chen, Chen* et al. | 2024 | |
| 10 | Development of a measurement system to determine the circumferential force on a feather key | Conference contribution, not refereed | Chen, Chen et al. | 2024 | |
| 11 | Topology optimization of compliant mechanisms with distributed compliance (hinge-free compliant mechanisms) by using stiffness and adaptive volume constraints instead of stress constraints | Article in trade journal, refereed | Seltmann, Stephanie et al. | 2023 |  |
| 12 | Simulation of feather key connections using elastic-plastic material models | Conference contribution, not refereed | Muhammedi, Benjamin et al. | 2023 | |
| 13 | Productive teaming under uncertainty: when a human and a machine classify objects together | Conference contribution, refereed | Rother, Anne et al. | 2023 | |
| 14 | TOPOLOGY OPTIMIZATION-BASED DESIGN OF A SENSOR-INTEGRATING FEATHER KEY | Conference contribution, refereed | Seltmann, Stephanie* et al. | 2023 | |
| 15 | Investigations on permissible plastic strains using the example of feather key connections | Conference abstract | Muhammedi, Benjamin et al. | 2023 | |
| 16 | Simulation of the local CoF development in dynamically loaded contact surfaces (fretting) | Conference contribution, not refereed | Oehme, Silvano et al. | 2023 | |
| 17 | Test Method for Torque Transmissibility in High-Speed Electric Machines | Conference contribution, not refereed | Ebermann, Marko et al. | 2023 | |
| 18 | Influence of geometry on the failure behaviour of force-locking and form-locking shaft-hub connections on the example of the inner knurled press-fit connection | Conference abstract | Hentschel, Tobias et al. | 2023 | |
| 19 | Influence of residual stresses caused be shrink fit on strength of hollow shafts | Conference abstract | Le Duc, Loc* et al. | 2023 | |
| 20 | Simulation of a point-loaded rolling bearing outer ring to investigate the slip conditions in the joint | Conference contribution, not refereed | Le Duc, Loc* et al. | 2023 | |
| 21 | Sensory Utilizable Design Elements: Classifications, Applications and Challenges | Article in trade journal, refereed | Harder, André* et al. | 2022 | |
| 22 | Benchmarking Newer Multiaxial Fatigue Strength Criteria on Data Sets of Various Sizes | Article in trade journal, refereed | Papuga, Jan* et al. | 2022 | |
| 23 | Probabilistic Method to Estimate the Scatter of the Fatigue Strength of Shafts in the HCF Region | Conference contribution, refereed | Vetter, Sebastian* et al. | 2022 | |
| 24 | Machine Elements – Shaping the Future through Continuous Evolution | Article in trade journal, not refereed | Kirchner, Eckhard et al. | 2022 | |
| 25 | Comparative study of crack initiation criteria for flat–flat contacts subjected to fretting fatigue of drive-train components | Conference contribution, refereed | Knabner, Denny* et al. | 2022 | |
| 26 | Probabilistic Method to Estimate the Fatigue-Strength Scatter of Shafts in the HCF Region | Conference contribution, not refereed | Vetter, Sebastian et al. | 2022 | |
| 27 | Generation of friction-increasing surfaces by turn-milling | Article in trade journal, refereed | Funke, Roman* et al. | 2022 | |
| 28 | An AI-Assisted Design Method for Topology Optimization without Pre-Optimized Training Data | Conference contribution, refereed | Halle, A.* et al. | 2022 | |
| 29 | Development of a calculation method for the fail safe design of steel-steel contacts under fretting fatigue | Conference contribution, not refereed | Knabner, Denny* et al. | 2022 | |
| 30 | Topology-optimization based design of multi-degree-of-freedom compliant mechanisms (mechanisms with multiple pseudo-mobility) | Article in trade journal, refereed | Seltmann, Stephanie et al. | 2022 | |
| 31 | Design and control of actively prestressed compliant mechanisms for variable stiffness actuators | Article in trade journal, refereed | Mauser, Kristian* et al. | 2022 | |
| 32 | Investigating the Friction Behavior of Turn-Milled High Friction Surface Microstructures under Different Tribological Influence Factors | Article in trade journal, refereed | Schanner, Jonathan* et al. | 2022 | |
| 33 | Development of a calculation method for the fail safe design of steel-steel contacts under fretting fatigue | Conference contribution, not refereed | Knabner, Denny* et al. | 2022 | |
| 34 | Fretting fatigue strength assessment | Conference contribution, not refereed | Knabner, Denny* et al. | 2022 | |
| 35 | Calculation method for the fail-safe design of steel-steel contacts subject to fretting fatigue based on a worst-case assumption | Article in trade journal, refereed | Knabner, Denny* et al. | 2022 | |
| 36 | Shape related fatigue strength of key-shaft connections under torsional loading | Conference abstract | Muhammedi, Benjamin* et al. | 2022 | |
| 37 | Fretting fatigue of multiaxially loaded shrink-fit connections – the effect of material sensitivity on fatigue strength | Conference contribution, refereed | Suchy, Lukas* et al. | 2022 | |
| 38 | Tribological adaption of a failure hypothesis for fretting fatigue based on the local parameters slip amplitude and contact pressure | Conference contribution, refereed | Knabner, Denny* et al. | 2022 | |
| 39 | High-cycle fatigue of multi-axially loaded shrink fits under simultaneous dynamic torsion and rotating bending | Conference contribution, not refereed | Suchy, Lukas et al. | 2022 | |
| 40 | Fatigue of Multiaxially Loaded Shaft-Hub Connection Under Different Load Parameters | Conference contribution, refereed | Suchy, Lukas* et al. | 2021 | |
| 41 | A measure for the similarity of vector spaces | Preprint | Campanile, Lucio Flavio et al. | 2021 | |
| 42 | Accuracy and precision: a new view on kinematic assessment of solid-state hinges and compliant mechanisms | Preprint | Campanile, Lucio Flavio et al. | 2021 | |
| 43 | Topology-optimization based design of multi-degree-of-freedom compliant mechanisms (mechanisms with multiple pseudo-mobility) | Preprint | Kirmse, Stephanie et al. | 2021 | |
| 44 | Vibration reduction by stiffness modulation - A theoretical study | Article in trade journal, refereed | Nowak, Alexander* et al. | 2021 | |
| 45 | An Artificial Intelligence-Assisted Design Method for Topology Optimization without Pre-Optimized Training Data | Article in trade journal, refereed | Halle, Alex* et al. | 2021 | |
| 46 | Probabilistic Method to Estimate the Scatter of the Fatigue Strength of Shafts in the HCF Region | Conference abstract | Vetter, Sebastian et al. | 2021 | |
| 47 | Accuracy and precision: A new view on kinematic assessment of solid-state hinges and compliant mechanisms | Article in trade journal, refereed | Campanile, Lucio Flavio et al. | 2021 | |
| 48 | Investigation of cracks caused by microslip at joined structures | Article in trade journal, not refereed | Hasse, Alexander et al. | 2020 | |
| 49 | Poisson Induced Bending Actuator for Soft Robotic Systems | Article in trade journal, refereed | Hasse, Alexander* et al. | 2020 | |
| 50 | Fatigue strength of hypotrochoidal polygon-shaft-hub connection | Article in trade journal, refereed | Vetter, Sebastian et al. | 2020 | |
| 51 | Topology Optimization by Means of Deep Learning Without Pre-Optimized Training Data | Conference contribution, refereed | Halle, Alex* et al. | 2020 | |
| 52 | How to prestress compliant mechanisms for a targeted stiffness adjustment | Article in trade journal, refereed | Mauser, Kristian et al. | 2020 | |
| 53 | Synthesis of compliant mechanisms with selective compliance - An advanced procedure | Article in trade journal, refereed | Kirmse, Stephanie et al. | 2020 | |
| 54 | Vibration Reduction by Stiffness Modulation - a Theoretical Study | Preprint | Nowak, Alexander* et al. | 2020 | |
| 55 | An AI-Assisted Design Method for Topology Optimization Without Pre-Optimized Training Data | Preprint | Halle, Alex* et al. | 2020 | |
| 56 | Cylindrical journal bearings and their transformation of shape deviations into deviations of function-determining parameters | Conference contribution, refereed | Ebermann, Marko* et al. | 2020 | |
| 57 | The Utilization of Production-Related Defects for Improving Operating Properties of Journal Bearings | Article in trade journal, refereed | Friedrich, Lars* et al. | 2020 | |
| 58 | The survival probability of shafts and shaft-hub connections | Article in trade journal, refereed | Vetter, Sebastian* et al. | 2019 | |
| 59 | Fatigue strength of inner knurled interference fit joined by forming and cutting methods | Article in trade journal, refereed | Suchy, Lukas et al. | 2019 | |
| 60 | Topology Optimization by Means of Deep Learning | Conference contribution, not refereed | Halle, Alex et al. | 2019 | |
| 61 | Durability of hypotrochoidal shaft-hub connections under rotating bending with static torsion | Conference contribution, refereed | Vetter, Sebastian* et al. | 2019 | |
| 62 | Different Failure Mechanisms in Keyed Shaft-Hub Connections under Dynamic Torque Load | Conference contribution, refereed | Kresinsky, Felix* et al. | 2019 | |
| 63 | Compliant Journal Bearings | Conference contribution, not refereed | Friedrich, Lars et al. | 2019 | |
| 64 | Improvement of the operating properties of hydrodynamic plain bearings through shape adaptation | Conference contribution, not refereed | Kirmse, Stephanie* et al. | 2019 | |
| 65 | Synthesis of shape-adaptive plain bearings | Conference contribution, refereed | Kirmse, Stephanie* et al. | 2019 | |
| 66 | Analyzing the Effect of Prestressing Forces on Selective Compliant Mechanisms: A Case Study | Conference contribution, refereed | Mauser, Kristian et al. | 2019 | |
| 67 | Research into the fatigue strength of high stressed hollow shaft press-fit connections | Conference contribution, not refereed | Günther, Christian* et al. | 2019 | |
| 68 | Stiffness modulation as a method for vibration reduction | Conference abstract | Nowak, Alexander* et al. | 2019 | |
| 69 | Influence of Geometric Shape Defects on Operating Parameters in Cylindrical Journal Bearings | Conference contribution, refereed | Ebermann, Marko* et al. | 2019 | |
| 70 | Framework for automated program generation of HRC applications | Conference contribution, refereed | Müller, Fabian et al. | 2018 | |
| 71 | Wavelet-based analysis of time-variant adaptive structures | Article in trade journal, refereed | Dziedziech, Kajetan et al. | 2018 | |
| 72 | Influence of Joining Method on Strength Fatigue of Inner Knurled Interference Fit | Conference abstract | Suchy, Lukas et al. | 2018 | |
| 73 | High-cycle fatigue of press fit connectinos under multiaxial loading | Conference contribution, not refereed | Suchy, Lukas et al. | 2018 | |
| 74 | Inner knurled interference fit as a further development of the conventional knurled interference fit | Conference contribution, not refereed | Suchy, Lukas et al. | 2018 | |
| 75 | Survival Probability of Free Surfaces and Shaft-Hub Connections | Conference contribution, not refereed | Vetter, Sebastian* et al. | 2018 | |
| 76 | Load limits of elastic-plastic stressed press-fit connections on the example of hollow shafts | Conference contribution, not refereed | Günther, Christian* et al. | 2018 | |
| 77 | Load limits on keyed shaft hub connections under torque load | Conference contribution, not refereed | Kresinsky, Felix* et al. | 2018 | |
| 78 | Fretting fatigue at jointed components | Conference contribution, not refereed | Hauschild, Sven et al. | 2018 | |
| 79 | The Survival Probability of Shaft-Hub Connections | Conference abstract | Vetter, Sebastian* et al. | 2018 | |
