Selected publications from the Professorship
all entries in the University Library of Chemnitz
Selected publications by research field
Biomechatronics
Title |
Type |
Author |
Year |
DOI |
| Shape Memory Alloy-based Stepper Drive for a Hand Exoskeleton | Conference paper | Carabello, Alina; Buschbeck, Marie; Erben, Andreas; Pagel, Kenny; Drossel, Welf-Guntram | 2025 | Direct access |
| An analysis of biomechanical requirements and actuating technologies of biomimetic hand exoskeletons regarding to driving force and stroke | Conference paper | Carabello, Alina; Pagel, Kenny; Drossel, Welf-Guntram | 2024 | Direct access |
| Approach for Non-Intrusive Detection of the Fit of Orthopaedic Devices Based on Vibrational Data | Journal article | Neupetsch, Constanze; Hensel, Eric; Heinke, Andreas; Stapf, Tom; Stecher, Nico; Malberg, Hagen; Heyde, Christoph-Eckhard; Drossel, Welf-Guntram | 2023 | Direct access |
| Unique Device Identification–Based Linkage of Hierarchically Accessible Data Domains in Prospective Surgical Hospital Data Ecosystems: User-Centered Design Approach | Journal article | Kozak, Karol; Seidel, André; Matvieieva, Nataliia; Neupetsch, Constanze; Teicher, Uwe; Lemme, Gordon; Achour, Anas Ben; Barth, Martin; Ihlenfeldt, Steffen; Drossel, Welf-Guntram | 2023 | Direct access |
| Biomechanical validation of additively manufactured artifcial femoral bones | Journal article | Metzner, Florian; Neupetsch, Constanze; Carabello, Alina; Pietsch, Malte; Wendler, Tony; Drossel, Welf-Guntram | 2022 | Direct access |
| Novel Procedure for Determining the Finger Force in Flexion Depending on the Finger Position | Contribution to a conference proceedings volume | Carabello, Alina ; Henkner, Rick; Drossel, Welf-Guntram | 2022 | Direct access |
| Proof of Concept for the Detection of Local Pressure Marks in Prosthesis Sockets Using Structural Dynamics Measurement | Journal article | Neupetsch, Constanze ; Hensel, Eric; Kranz, Burkhard; Drossel, Welf-Guntram; Felderhoff, Thomas; Heyde, Christoph-Eckhard | 2021 | Direct access |
| Influence of osteoporosis on the compressive properties of femoral cancellous bone and its dependence on various density parameters | Journal article | Metzner, Florian; Neupetsch, Constanze; Fischer, Jean-Pierre; Drossel, Welf-Guntram; Heyde, Christoph-Eckhard; Schleifenbaum, Stefan | 2021 | Direct access |
| Investigation of Orthopedic Prosthesis Socket Management after Transfemoral Amputation by Expert Survey | Journal article | Carabello, Alina ; Schellnock, Julia; Schleifenbaum, Stefan; Hömme, Ann-Kathrin; Felderhoff Thomas; Menküc, Benjamin Sefa; Drossel, Welf-Guntram | 2021 | Direct access |
| A novel approach for increasing the traceability of 3D printed medical products | Contribution to a conference proceedings volume | Matvieieva, Nataliia; Neupetsch, Constanze; Oettel, Markus; Makdani, Varun; Drossel, Welf-Guntram | 2020 | Direct access |
| Comparison of Resistive and Optical Strain Measurement for Early Fracture Detection | Contribution to a conference proceedings volume | Carabello, Alina ; Neupetsch, Constanze; Werner, Michael; Drossel, Welf-Guntram; Zyjonz Dirk | 2020 | Direct access |
| Early Virtual Reality User Experience and Usability Assessment of a Surgical Shape Memory Alloy Aspiration/Irrigation Instrument | Contribution to a conference proceedings volume | Lorenz, Mario; Neupetsch, Constanze; Rotsch, Christian; Klimant, Philipp; Hammer, Niels | 2019 | Direct access |
| Development and Validation of Bone Models using Structural Dynamic Measurement Methods | Contribution to a conference proceedings volume | Neupetsch, Constanze ; Hensel, Eric; Werner, Michael; Meißner, Sven; Troge, Jan; Drossel, Welf-Guntram; Rotsch, Christian | 2019 | Direct access |
Adaptive Structures and Systems
Title |
Type |
Author |
Year |
DOI |
| Mixed-Dimensional Finite Element Modelling of Passive Thermal Error Compensation Systems in Machine Tools | Conference paper | Voigt, Immanuel; Drossel, Welf-Guntram | 2026 | Direct access |
| Heat-Transfer Properties of Additively Manufactured Aluminum Lattice Structures in Combination with Phase Change Material | Journal article | Voigt, Immanuel; Schmerler, Rico; Korn, Hannes; Drossel, Welf-Guntram | 2024 | Direct access |
| Development of a Self-Regulating Solar Shading Actuator Based on the Thermal Shape Memory Effect | Journal article | Stelzmann, Mario; Zakner, Felix; Navarro de Sosa, Iñaki; Nemati, Amir; Maaß, Burkhard; Drossel, Welf-Guntram | 2024 | Direct access |
| Development of a measurement system to determine the circumferential force on a feather key | Journal article | Chen, Chen* ; Muhammedi, Benjamin* ; Bäcker, Dennis; Drossel, Welf-Guntram ; Seltmann, Stephanie ; Nowak, Alexander ; Hasse, Alexander | 2024 | Direct access |
| Entwicklung eines Systems zur Ermittlung der Umfangskräfte an einer Passfeder | Conference paper | Chen, Chen* ; Muhammedi, Benjamin* ; Bäcker, Dennis ; Drossel, Welf-Guntram ; Seltmann, Stephanie ; Nowak, Alexander ; Hasse, Alexander | 2024 | Direct access |
| Smart pressure film sensor for machine tool optimization and characterization of the dynamic pressure field on machine surfaces | Conference paper | Erben, Andreas; Geist, Alexander; Voigt, Immanuel; Senf, Björn; Mäder, Thomas; Glänzel, Janine; Ihlenfeldt, Steffen; Drossel, Welf-Guntram | 2023 | Direct access |
| SIMULATION MODEL FOR A LOW-POWER PIEZOELECTRIC ENERGY HARVESTING APPLICATION | Conference paper | Chen, Chen* ; Bäcker, Dennis ; Drossel, Welf-Guntram | 2023 | Direct access |
| Tools wear monitoring during the turning process with computational intelligence approaches | Conference paper | Nemati, Amir ; Pardoe, Robert; Panesso, Miguel; Bocklisch, Steffen F; Drossel, Welf-Guntram | 2023 | Direct access |
| Potentials and limitations in production and use of herringbone gearings for high-performance gearboxes | Journal article | Dix, Martin; Drossel, Welf-Guntram; Schlecht, Berthold; Bauer, Ruben; Kräusel, Verena; Lahl, Mike; Ulrich, Carsten; Hensel, Eric; Regel, Joachim; Böttger, Jonas; Rosenlöcher, Thomas | 2023 | Direct access |
| Quality Determination of Hydraulic Pumps with Adaptive Fuzzy Pattern Classifiers to Reduce the Risk for Quality Management | Journal article | Nemati, Amir ; Öztürk, Elif; Bocklisch, Steffen F; Drossel, Welf-Guntram | 2023 | Direct access |
| Adaptive neuro-fuzzy inference system models based on particle swarm optimization and genetic algorithms for bidirectional deep drawing | Conference paper | Nemati, Amir ; Bäcker, Dennis; Müller, Peter; Drossel, Welf-Guntram | 2022 | Direct access |
| Fuzzy pattern modeling of self-pierce riveting for data from experiments and computer simulations | Journal article | Nemati, Amir ; Jäckel, Mathais; Bocklisch, Steffen F; Drossel, Welf-Guntram | 2022 | Direct access |
| Experimental investigation of passive thermal error compensation approach for machine tools | Conference paper | Voigt, Immanuel; Fickert, Axel; Wiemer, Hajo; Drossel, Welf-Guntram | 2023 | Direct access |
| Development and Examination of an Internally Switchable Thermosiphon | Journal article | Voigt, Immanuel; Lütke, Niklas; Thüsing, Kai; Winkler, Markus; Drossel, Welf-Guntram | 2022 | Direct access |
| Adaptive neuro-fuzzy inference system models based on particle swarm optimization and genetic algorithms for bidirectional deep drawing | Conference paper | Nemati, Amir ; Bäcker, Dennis; Müller, Peter; Drossel, Welf-Guntram | 2022 | Direct access |
| Fuzzy pattern modeling of self-pierce riveting for data from experiments and computer simulations | Journal article | Nemati, Amir ; Jäckel, Mathais; Bocklisch, Steffen F; Drossel, Welf-Guntram | 2022 | Direct access |
| Experimental investigation of heat pipe performance under translational acceleration | Journal article | Voigt, Immanuel; Drossel, Welf-Guntram | 2021 | Direct access |
| Increased thermal inertia of ball screws by using phase change materials | Journal article | Voigt, Immanuel; Navarro de Sosa, Iñaki; Wermke, Benjamin; Bucht, André; Drossel, Welf-Guntram | 2019 | Direct access |
| Influence of process error on flank topography – comparison between continuous generating gear grinding and gear honing | Conference paper | Böttger, Jonas ; Kimme, Simon; Drossel, Welf-Guntram | 2019 | Direct access |
| Thermal error compensation on linear direct drive based on latent heat storage | Conference paper | Voigt, Immanuel; Winkler, Stefan; Werner, Ralf; Bucht, André; Drossel, Welf-Guntram | 2018 | Direct access |
| Simulationsbasierte Prozessüberwachung beim Wälzschleifen | Speech | Böttger, Jonas ; | 2018 | Direct access |
| Simulation of dressing process for continuous generating gear grinding | Conference- and Journal article | Böttger, Jonas ;Kimme, Simon; Drossel, Welf-Guntram | 2019 | Direct access |
| Prognosefähige Prozessdaten beim kontinuierlichen Wälzschleifen von Verzahnungen | Speech | Böttger, Jonas ; Fritzsch, Enrico ; Kimme, Simon ; Drossel, Welf-Guntram ; Putz, Matthias | 2018 | Direct access |
| Schwingungen beim kontinuierlichen Wälzschleifen von Verzahnungen | Speech | Böttger, Jonas ; | 2018 | Direct access |
| Development and examination of switchable heat pipes | Journal article | Schneider, Dorothea; Lauer, Martin; Voigt, Immanuel; Drossel, Welf-Guntram | 2016 | Direct access |
High-frequency and vibration systems
Title |
Type |
Author |
Year |
DOI |
| In-process measurement of vibrations in ultrasonic vibration superimposed turning using mechanical feedback signals | Conference paper | Werner, Jonas Maximilian; Liborius, Hendrik; Drossel, Welf-Guntram; Schubert, Andreas | 2026 | Direct access |
| Influence of Relative Transducer Positioning on Cavitation Performance in Ultrasonic Cleaning Baths | Conference paper | Felix , Weiß; Drossel, Welf-Guntram | 2026 | Direct access |
| Model-Based Approach for a Control System for Ultrasonic Systems Using Mechanical Sensors | Conference paper | Werner, Jonas Maximilian; Gerber, Marcus; Drossel, Welf-Guntram | 2026 | Direct access |
| Influence of External Forces on the Detectability of the Resonance Frequency of Ultrasonic Vibration Systems | Conference paper | Werner, Jonas Maximilian; Hansen, Matalin; Drossel, Welf-Guntram | 2025 | Direct access |
| Feasibility Study for Monitoring an Ultrasonic System Using Structurally Integrated Piezoceramics | Journal article | Werner, Jonas Maximilian; Krüger, Tim; Drossel, Welf-Guntram | 2024 | Direct access |
| Comparison of Structural Integrated Piezoceramics, Piezoelectric Patches and Strain Gauges for Condition Monitoring | Journal article | Werner, Jonas Maximilian; Engelmann, Max; Schmidt, Marek; Titsch, Christian; Dix, Martin; Drossel, Welf-Guntram | 2022 | Direct access |
| Printed Multilayer Piezoelectric Transducers on Paper for Haptic Feedback and Dual-Touch Sensation | Journal article | Schmidt, Georg C.; Werner, Jonas Maximilian; Weissbach, Thomas; Strutwolf, Jörg; Eland, Robert; Drossel, Welf-Guntram; Hübler, Arved C. | 2022 | Direct access |
| In-process evaluation of continuous generating gear grinding for maintaining workpiece quality and acoustic behavior of gear wheels | Journal article | Böttger, Jonas Gentzen, Jens; Kimme, Simon; Putz, Matthias; Drossel, Welf-Guntram | 2021 | Direct access |
| Characterization of vibration in continuous generating grinding and resulting influence on tooth flank topography and gear excitation | Conference- and Journal article | Böttger, Jonas ;Kimme, Simon; Drossel, Welf-Guntram | 2021 | Direct access |
| Close-to-process strain measurement in ultrasonic vibration-assisted turning | Journal article | Kimme, Simon; Hafez, Nessma; Titsch, Christian; Werner, Jonas Maximilian; Nestler, Andreas; Drossel, Welf-Guntram | 2019 | Direct access |
| Analysis of periodic components on tooth flanks by simulation of continuous generating gear grinding | Conference paper, International Gear Conference IGC Lyon | Böttger, Jonas ; Kimme, Simon; Drossel, Welf-Guntram | 2018 | Direct access |
Doctoral theses
Title |
Author |
Chairman |
Referees |
Defense |
| Umformend hergestellte intrinsische Hybridverbunde für crashbelastete Strukturbauteile | Dr.-Ing. Matthias Riemer | Prof. Dr. M. Dix |
Prof. Dr. W.-G. Drossel Prof. Dr. M. Gude |
08.01.2026 |
| Angepasste Scanstrategie für die Fertigung filigraner Strukturen mit dem Laser-Powder-Bed-Fusion-Verfahren | Dr.-Ing. Hannes Korn | Prof. Dr. T. Lampke |
Prof. Dr. W.-G. Drossel Prof. Dr. H. Zeidler |
15.12.2025 |
| Beitrag zur Charakterisierung faserverstärkter Aluminiumschäume | Dr.-Ing. Robert Albrecht | Prof. Dr. M. Dix |
Prof. Dr. W.-G. Drossel Prof. Dr. U. Krupp |
29.10.2025 |
| Charakterisierung und reduzierte Finite-Elemente-Beschreibung von passiven Systemen zur Kompensation thermischer Fehler in Werkzeugmaschinen | Dr.-Ing. Immanuel Voigt | Prof. Dr. A. Schubert |
Prof. Dr. W.-G. Drossel Prof. Dr. S. Ihlenfeldt |
11.12.2024 |
| Infiltration geschlossenporiger pulvermetallurgischer Aluminiumschäume mit Phase-Change-Material und Evaluierung des Potentials des Materialverbundes | Dr.-Ing. Rico Schmerler | Prof. Dr. A. Hasse |
Prof. Dr. W.-G. Drossel Prof. Dr. N. Modler |
29.05.2024 |
| Entwicklung einer End-of-Line Körperschallprüfmethodik für hochintegrierte elektrifizierte Antriebstopologien | Dr.-Ing. Jakob Bonart | Prof. Dr. R. Mayer |
Prof. Dr. W.-G. Drossel Prof. Dr. M. Sause |
18.10.2023 |
| Entwurfsmethodik zur Auslegung von Aktoren basierend auf magnetischen Formgedächtnislegierungen | Dr.-Ing. Christian Titsch | Prof. Dr. A. Schubert |
Prof. Dr. W.-G. Drossel Prof. Dr. J. Maas |
06.10.2023 |
| Beitrag zur Identifizierung geometriebeeinflussender Stellgrößen im Karosseriebau | Dr.-Ing. Christian Schwarz | Prof. Dr. M. Dix |
Prof. Dr. W.-G. Drossel Prof. Dr. W. Volk |
20.12.2022 |
| Beitrag zur Methodik der fehlertoleranten Regelung für die Softrobotik | Dr.-Ing. Tien Sy Le | Prof. Dr. M. Berger |
Prof. Dr. W.-G. Drossel Prof. Dr. M. Dix |
21.07.2022 |
| Charakterisierung, Modellbildung und Regelung mechatronischer Hochlastaktoren aus thermischen Formgedächtnislegierungen | Dr.-Ing. André Bucht | Prof. Dr. M. Dix |
Prof. Dr. W.-G. Drossel Prof. Dr. T. Melz |
14.04.2022 |
| Prozessorientierte Ableitung akustischer Richtwerte für die Getriebeentwicklung und anschließende Klassifizierung der Geräusche | Dr.-Ing. Jonas Knappe | Prof. Dr. A. Hasse |
Prof. Dr. W.-G. Drossel Prof. Dr. S. Weinzierl |
24.01.2022 |
| Untersuchung des dynamische Verhaltens von Werkzeugmaschinen unter Zerspanungsbedingungen mit Hilfe der Betriebsmodalanalyse | Dr.-Ing. Jan Berthold | Prof. Dr. M. Groß |
Prof. Dr. W.-G. Drossel Prof. Dr. S. Ihlenfeldt |
14.10.2021 |
| Erfassung und Regelung der Kraftverteilung in Tiefziehprozessen | Dr.-Ing. Wolfgang Zorn | Prof. Dr. M. Dix |
Prof. Dr. W.-G. Drossel Prof. Dr. K. Wegener |
13.09.2021 |
| Beitrag zur Analyse und Synthese von variablen Kraft- und Wegfunktionen beim Tiefziehen auf Servo-Spindelpressen | Dr.-Ing. Sebastian Kriechenbauer | Prof. Dr. M. Dix |
Prof. Dr. W.-G. Drossel Prof. Dr. K. Wegener |
09.07.2021 |
| Untersuchungen zur Herstellung von Werkzeugelementen für das Presshärten mittels Laser Beam Melting | Dr.-Ing. Robert Stache | Prof. Dr. T. Lampke |
Prof. Dr. W.-G. Drossel Prof. Dr. G. Witt |
22.10.2020 |
| Potenzial und Grenzen der akustischen EOL-Fahrzeug-Korrelation am Beispiel eines Pkw-Getriebes unter Anwendung verschiedener Methoden der deskriptiven Statistik | Dr.-Ing. Björn Knöfel | Prof. Dr. M. Groß |
Prof. Dr. W.-G. Drossel Prof. Dr. E. Sarradj |
06.08.2020 |
| Funktionalitätsverbesserung von spanenden Werkzeugmaschinen durch additive mechatronische Systeme | Dr.-Ing. Markus Wabner | Prof. Dr. M. Groß |
Prof. Dr. W.-G. Drossel Prof. Dr. S. Ihlenfeldt |
14.07.2020 |
| Simulation des Wälzschleifens und dessen Einfluss auf die Flankentopografie und Verzahnungstechnik | Dr.-Ing. Simon Kimme | Prof. Dr. A. Schubert |
Prof. Dr. W.-G. Drossel Prof. Dr. C. Brecher |
19.12.2019 |
| Prozessregelungen durch piezoelektrisch erweiterte Umformwerkzeuge | Dr.-Ing. Tobias Bäume | Prof. Dr. L. Kroll |
Prof. Dr. W.-G. Drossel Prof. Dr. W. Volk |
15.11.2019 |
| Multidimensionale Bewertung von Fügetechnologien – Entwicklung einer Auswahlmethodik zur optimierten Entscheidungsfindung im Karosseriebau | Dr.-Ing. Saphir Ahmed Choudry | Prof. Dr. B. Awiszus |
Prof. Dr. W.-G. Drossel Prof. Dr. P. Mayr |
29.08.2019 |
| Beitrag zur Prädiktion von Schalltransferpfaden in Fahrzeuggetrieben | Dr.-Ing. Carsten Schmitt | Prof. Dr. A. Hasse |
Prof. Dr. W.-G. Drossel Prof. Dr. S. Ihlenfeldt |
05.09.2018 |
| Entwicklung von Formgedächtnisaktoren mit inhärenter Führungsfunktion | Dr.-Ing. Kenny Pagel | Prof. Dr. A. Schubert |
Prof. Dr. W.-G. Drossel Prof. Dr. R. Neugebauer |
03.09.2018 |
| Analyse elastischer Wechselwirkungen an Servo-Spindelpressen | Dr.-Ing. Peter Müller | Prof. Dr. A. Schubert |
Prof. Dr. W.-G. Drossel Prof. Dr. S. Ihlenfeldt |
03.09.2018 |
| Vermeidungsstrategien fluiddynamischer Effekte beim Einsatz von Schnellerwärmungstechnologien in der Warmumformung | Dr.-Ing. Tobias Opitz | Prof. Dr. T. Lampke |
Prof. Dr. W.-G. Drossel Prof. Dr. E. Baake |
28.08.2018 |
| Nichtlineares Deformationsverhalten von Karosserie-Außenhautbauteilen aus Aluminium im Lacktrocknungsprozess | Dr.-Ing. Jochen Regensburger | Prof. Dr. M. Groß |
Prof. Dr. W.-G. Drossel Prof. Dr. W. Volk Prof. Dr. H. Waltl |
19.04.2018 |
| Induktive Erwärmung von Formplatinen für die Warmumformung | Dr.-Ing. Tobias Vibrans | Prof. Dr. S. Gröger |
Prof. Dr. W.-G. Drossel Prof. Dr. B. Nacke |
06.12.2016 |
