Publications of the professorship Machine Elements and Product Development
| Nr. |
Title |
Type |
Author |
Year |
ResearchGate |
| 1 | The survival probability of shafts and shaft-hub connections | Article in trade journal, refereed | Vetter, Sebastian* et al. | 2019 |  |
| 2 | Fatigue strength of inner knurled interference fit joined by forming and cutting methods | Article in trade journal, refereed | Suchy, Lukas et al. | 2019 | |
| 3 | Durability of hypotrochoidal shaft-hub connections under rotating bending with static torsion | Conference contribution, refereed | Vetter, Sebastian* et al. | 2019 | |
| 4 | Different Failure Mechanisms in Keyed Shaft-Hub Connections under Dynamic Torque Load | Conference contribution, refereed | Kresinsky, Felix* et al. | 2019 | |
| 5 | Research into the fatigue strength of high stressed hollow shaft press-fit connections | Conference contribution, not refereed | Günther, Christian* et al. | 2019 | |
| 6 | Influence of Hub Parameters on Joining Forces and Torque Transmission Output of Plastically-Joined Shaft-Hub-Connections with a Knurled Contact Surface | Article in trade journal, refereed | Suchy, Lukas* et al. | 2018 | |
| 7 | Influence of geometric form deviations on operating parameters inhydrodynamic bearings | Conference contribution, refereed | Ebermann, Marko* et al. | 2018 | |
| 8 | The transferability of model-based static coefficients of friction to real components | Article in trade journal, not refereed | Leidich, Erhard et al. | 2018 | |
| 9 | Simulation of the influence of form deviations on operating parameters of hydrodynamic bearings with ALP3T and MATLAB | Conference contribution, not refereed | Ebermann, Marko et al. | 2018 | |
| 10 | Mean Stress Effect of Steel | Conference contribution, not refereed | Schlecht, Berthold et al. | 2018 | |
| 11 | DIN 743 - Simplification vs. Increasing Complexity | Conference contribution, not refereed | Leidich, Erhard et al. | 2018 | |
| 12 | Influence of Joining Method on Strength Fatigue of Inner Knurled Interference Fit | Conference abstract | Suchy, Lukas et al. | 2018 | |
| 13 | High-cycle fatigue of press fit connectinos under multiaxial loading | Conference contribution, not refereed | Suchy, Lukas et al. | 2018 | |
| 14 | Inner knurled interference fit as a further development of the conventional knurled interference fit | Conference contribution, not refereed | Suchy, Lukas et al. | 2018 | |
| 15 | Survival Probability of Free Surfaces and Shaft-Hub Connections | Conference contribution, not refereed | Vetter, Sebastian* et al. | 2018 | |
| 16 | Load limits of elastic-plastic stressed press-fit connections on the example of hollow shafts | Conference contribution, not refereed | Günther, Christian* et al. | 2018 | |
| 17 | Load limits on keyed shaft hub connections under torque load | Conference contribution, not refereed | Kresinsky, Felix* et al. | 2018 | |
| 18 | Fretting fatigue at jointed components | Conference contribution, not refereed | Hauschild, Sven et al. | 2018 | |
| 19 | The Survival Probability of Shaft-Hub Connections | Conference abstract | Vetter, Sebastian* et al. | 2018 | |
| 20 | FE simulation of creep on rolling-bearing-supported helical planetary gears | Conference contribution, refereed | Schiemann, Tom* et al. | 2017 | |
| 21 | rolling bearing creep in helical planetary gears - influencing variables and countermeasures | Conference contribution, refereed | Schiemann, Tom* et al. | 2017 | |
| 22 | ebusiness standards, data quality and process quality as enabler of industry 4.0 - state of the art, challenges and approaches | Article in trade journal, not refereed | Köhler, Susann et al. | 2017 | |
| 23 | Investigations of Hypocycloidal Shaft and Hub Connections | Article in trade journal, refereed | Leidich, Erhard et al. | 2017 | |
| 24 | Computation of the tooth root strength of worm wheels with a calculation program based on local sresses | Conference contribution, not refereed | Reißmann, Jan et al. | 2017 | |
| 25 | Method for simpel estimation of changing operation properties by deformation | Conference contribution, not refereed | Prase, Björn* et al. | 2017 | |
| 26 | strength assessment of components under tribological load | Article in trade journal, not refereed | Hauschild, Sven et al. | 2017 | |
| 27 | Failure mechanism in feathered key shaft hub connections under torsionsal load | Conference abstract | Kresinsky, Felix* et al. | 2017 | |
| 28 | Calculation method for mean stress effect of shafts and axles | Conference contribution, not refereed | Schlecht, Berthold et al. | 2017 | |
| 29 | calculation approach to an strenghth assessment for jointed components under fretting fatigue loads | Conference contribution, not refereed | Hauschild, Sven et al. | 2017 | |
| 30 | Numerical Analysis of Assembly and Transmission Behavior of Knurled Interference Fits | Conference contribution, refereed | Gerstmann, Thoralf et al. | 2016 | |
| 31 | Requirements for datum systems in computer aided tolerancing and the verification process | Conference contribution, refereed | Weißgerber, Marco et al. | 2016 | |
| 32 | Hypocycloidal Profiles - An Alternative Positive Locking Shaft Hub Connection | Conference contribution, refereed | Ziaei, Massoud et al. | 2016 | |
| 33 | Investigation of Hypocycloidal Hub and Shaft Connections | Conference abstract | Leidich, Erhard et al. | 2016 | |
| 34 | Intermediate layer as measure against rolling bearing creep | Conference abstract | Leidich, Erhard et al. | 2016 | |
| 35 | calculation of the tooth root strenght of worm wheels based on local stresses | Conference abstract | Reißmann, Jan et al. | 2016 | |
| 36 | Calculation of the Tooth Root Strength of Worm Wheel Teeth Based on Local Stresses | Article in trade journal, not refereed | Reißmann, Jan et al. | 2016 | |
| 37 | Optimation of feather key connection design under torque load | Conference contribution, not refereed | Kresinsky, Felix* et al. | 2016 | |
| 38 | Characteristics of hydrodynamic plain bearings with bonded coating | Conference contribution, not refereed | Prase, Björn* et al. | 2016 | |
| 39 | Numerical and analytical investigation of steel–aluminum knurled interference fits: Joining process and load characteristics | Article in trade journal, refereed | Kleditzsch, Stefan et al. | 2015 | |
| 40 | Gestaltung und Berechnung von Stahl-Aluminium Rändelpressverbänden | Article in trade journal, refereed | Lätzer, Michael et al. | 2015 | |
| 41 | Research investigation for the transmission behavior ofsteel-aluminum knurled interference fits | Article in trade journal, refereed | Lätzer, Michael et al. | 2015 | |
| 42 | Definition of remedies to avoid irreversible relative movements of outer bearing rings | Conference contribution, not refereed | Leidich, Erhard et al. | 2015 | |
| 43 | The effect of anodising on the fatigue Performance of self-tapping Aluminium screws | Article in trade journal, refereed | Gröber, Désirée et al. | 2015 | |
| 44 | Standardized torsion test method to estimate threshold values to quantify durability of remedies against fretting wear | Conference contribution, not refereed | Reiß, Friedemann et al. | 2015 | |
| 45 | Experimental Study on Laser Surface Texturing for Friction Coefficient Enhancement | Article in trade journal, refereed | Schille, Jörg* et al. | 2015 | |
| 46 | Functional considerations as starting point for datum systems in the first iteration loop of functional tolerance synthesis | Conference contribution, not refereed | Ebermann, Marko* et al. | 2015 | |
| 47 | strength assessment of jointed parts under fretting fatigue loads | Conference contribution, not refereed | Hauschild, Sven et al. | 2015 | |
| 48 | Numerical Investigation of Knurled Shaft-Hub Connections and especially of the Joining Process | Article in trade journal, refereed | Kleditzsch, Stefan et al. | 2014 | |
| 49 | Numerische Untersuchung von Abhilfemaßnahmen gegen tangentiale Wanderbewegungen von Wälzlagerringen | Conference contribution, not refereed | Schiemann, Tom et al. | 2014 | |
| 50 | Berechnungsmodell für Klemmverbindungen mit Außenspannung | Article in trade journal, refereed | Leidich, Erhard et al. | 2014 | |
| 51 | An IT-based cost information system for cost planning and monitoring in customized single-unit production | Conference contribution, refereed | Konarsky, Michael et al. | 2014 | |
| 52 | Integrated Data, IT and Process Analysis within the scope of Master Data Management and Business Process Management | Article in trade journal, not refereed | Götze, Uwe et al. | 2014 | |
| 53 | Integrated Master Data Management and Business Process Management and its contribution to Industry 4.0 | Conference contribution, refereed | Götze, Uwe et al. | 2014 | |
| 54 | The level of development of Master Data Management and Business Process Management - results from a survey | Book (authorship) | Götze, Uwe et al. | 2014 | |
| 55 | Master Data Quality as a key success factor for the product development process | Article in trade journal, not refereed | Leidich, Erhard et al. | 2014 | |
| 56 | THE TACTILE TOPOGRAPHY MEASUREMENT OF FUNCTIONAL ENGINEERING SURFACES AND THE OPPORTUNITIES OF A 3D CHARACTERISATION | Conference contribution, not refereed | Schiefer, S. et al. | 2014 | |
| 57 | Investigation of HVOF-Sprayed WC-Co Hardmetal Coatings for StaticFriction Applications | Conference contribution, refereed | Schiefer, S. et al. | 2014 | |
| 58 | damage mechanisms of plastic coated hydrodynamic journal bearings | Conference contribution, not refereed | Prase, Björn et al. | 2014 | |
| 59 | Design and calculation of Steel-Aluminium Knurled Inter-ference Fits | Conference contribution, refereed | Lätzer, Michael et al. | 2014 | |
| 60 | Steel-aluminum knurled interference fits: joining process and load characteristics | Article in trade journal, refereed | Kleditzsch, Stefan et al. | 2014 | |
| 61 | Method of a damage criterion based on friction energy to estimate coated systems in fretting wear environment | Book contribution | Reiß, Friedemann et al. | 2014 | |
| 62 | Investigation of HVOF-sprayed (Ti,Mo)(C,N)-Ni hardmetal coatings for static friction applications | Conference contribution, refereed | Berger, Lutz-Michael et al. | 2014 | |
| 63 | Holistic approach for surface geometry characterisation and the inluence on the friction behaviour of steel surfaces | Conference contribution, not refereed | Schiefer, Saskia et al. | 2014 | |
| 64 | Marginal slip, notch factor or stress intensity: Review of old and new design criteria of shaft-hub connections | Book contribution | Hofmann, Stefan et al. | 2014 | |
| 65 | On the fatigue strength of case-hardened keyed shaft-hub connections | Conference contribution, not refereed | Hofmann, Stefan et al. | 2014 | |
| 66 | Integration of GPS in the methodical design process according to VDI 2221 | Conference contribution, not refereed | Ebermann, Marko* et al. | 2014 | |
| 67 | Integration of the geometric product specification (GPS) into the methodical design process using a test bench as an example | Conference contribution, not refereed | Ebermann, Marko* et al. | 2014 | |
| 68 | A proposal for a fretting wear criterion for coated systems with complete contact based on accumulated friction energy density | Article in trade journal, refereed | Leidich, Erhard et al. | 2013 | |
| 69 | Master Data Quality as a Key Sucess Factor for the Product Design Process | Article in trade journal, not refereed | Götze, Uwe et al. | 2013 | |
| 70 | FE Simulations of Irreversible Relative Movements (Creeping) in Rolling Bearing Seats - Influential Parameters and Remedies | Book contribution | Maiwald, Andreas et al. | 2013 | |
| 71 | Analytical Computation of Multiple Interference Fits under Elasto-Plastic Deformations | Article in trade journal, refereed | Wachsmuth, Gerd et al. | 2013 | |
| 72 | FE-Simulations of irreversible relative movements (creeping) in rolling bearing seats | Conference contribution, refereed | Leidich, Erhard et al. | 2013 | |
| 73 | Investigation of HVOF-Sprayed Hardmetal Coatings for Static Friction Applications | Conference contribution, not refereed | Schiefer, Saskia et al. | 2013 | |
| 74 | Investigations of Sprayed Hardmetal Coatings for an Increase of the Static Friction Coefficient | Conference contribution, refereed | Gerlach, Marco et al. | 2013 | |
| 75 | Master Data Quality as a kex success factor for the product development process | Article in trade journal, not refereed | Leidich, Erhard et al. | 2013 | |
| 76 | Maximisation of load transmission in powertrain by use of friction-enhancing coatings | Conference contribution, not refereed | Gräfensteiner, Matthias et al. | 2013 | |
| 77 | Investigation of Hardmetal Coatings for Static Friction Applications | Conference contribution, refereed | Gräfensteiner, M. et al. | 2013 | |
| 78 | Avoidance of tangential relative movements of roller bearing rings by a specific choice of additional constructive remedies | Conference contribution, not refereed | Schiemann, Tom et al. | 2013 | |
| 79 | On the shrink-fit induced multiaxial stress state in adjacent notched shaft geometries | Conference abstract | Leidich, Erhard et al. | 2013 | |
| 80 | Calculation of the tooth root strength of worm wheels on local stresses | Conference contribution, not refereed | Reißmann, Jan et al. | 2013 | |
| 81 | Untersuchungen zum Übertragungsverhalten von Mehrschraubverbindungen : Experimente | Article in trade journal, refereed | Petersen, Udo et al. | 2013 | |
| 82 | IT-based cost information system as an instrument of the product cost management using the example of the construction contracts in tool and die produtcion | Article in trade journal, not refereed | Götze, Uwe et al. | 2012 | |
| 83 | ANALYTICAL AND NUMERICAL COMPUTATION OF KNURLED INTERFERENCE FITS IN COMPARISON WITH EXPERIMENTAL STUDIES | Conference contribution, not refereed | Lätzer, Michael et al. | 2012 | |
| 84 | ANALYTICAL AND NUMERICAL COMPUTATION OF KNURLED INTERFERENCE FITS IN COMPARISON WITH EXPERIMENTAL STUDIES | Conference abstract | Lätzer, Michael et al. | 2012 | |
| 85 | Experimental and Numerical Investigations of Steel-Aluminum Knurled Interference Fits | Conference contribution, not refereed | Lätzer, Michael et al. | 2012 | |
| 86 | Little walk, live longer | Article in trade journal, not refereed | Leidich, Erhard et al. | 2012 | |
| 87 | Extended studies on fretting wear criterion for coated systems with complete contact based on accumulated specific friction energy | Conference contribution, not refereed | Leidich, Erhard et al. | 2012 | |
| 88 | 3D kinematic simulation of roller bearings | Conference abstract | Maiwald, Andreas et al. | 2012 | |
| 89 | Numerical Investigation of Knurled Shaft-Hub Connections and Especially of the Joining Process | Conference contribution, refereed | Kleditzsch, Stefan et al. | 2012 | |
| 90 | Finally comparable values | Article in trade journal, not refereed | Leidich, Erhard et al. | 2012 | |
| 91 | Contribution to holistic characterization and functional testing of friction surfaces | Conference contribution, not refereed | Vidner, Jakub et al. | 2012 | |
| 92 | Enlargement of lifetime of worm wheels by switching the gear flank | Article in trade journal, refereed | Tschalabi, Iftikhar et al. | 2012 | |
| 93 | Fatigue endurable design of key-fit | Book contribution | Brůžek, Bohumil et al. | 2012 | |
| 94 | Influence of fillets and chamfers on design process | Conference contribution, not refereed | Leidich, Erhard et al. | 2012 | |
| 95 | Hypothesis for dimensioning of selected ultra-fine grained aluminum bolts | Article in trade journal, refereed | Gröber, Désirée et al. | 2012 | |
| 96 | Shaft-hub-connections: strength, dimesion, standards - an overview | Book contribution | Leidich, Erhard et al. | 2012 | |
| 97 | Tribological extension of fatigue analysis for component surfaces subjected to fretting | Conference contribution, not refereed | Vidner, Jakub et al. | 2012 | |
| 98 | Fatigue analysis of couplings subjected to fretting | Book contribution | Vidner, Jakub et al. | 2012 | |
| 99 | On the fatigue design of connecting rods subjected to fretting fatigue | Book contribution | Vidner, Jakub et al. | 2012 | |
| 100 | Methods of central master data management for the integrated product development | Conference contribution, not refereed | Leidich, Erhard et al. | 2011 | |
| 101 | Project-related calculation of complex products in contract manufacturing | Conference contribution, not refereed | Konarsky, Michael et al. | 2011 | |
| 102 | Calculation of elastic-plastic stressed multiple interference fit assemblies by the example of clamb-connections | Conference contribution, not refereed | Lätzer, Michael et al. | 2011 | |
| 103 | Product cost management in tool and die production | Article in trade journal, not refereed | Leidich, Erhard et al. | 2011 | |
| 104 | Strength investigation on a safety component of aluminium on the example of a bicycle brake lever | Article in trade journal, refereed | Gröber, Désirée et al. | 2011 | |
| 105 | Using the analytical strenght assessment of the FKM guideline for bronze materials | Conference contribution, not refereed | Reißmann, Jan et al. | 2011 | |
| 106 | Comparative investigation of static friction coefficent of 6082 aluminium alloy with the material conditions T651 and equal-channel angular pressing (ECAP) | Conference contribution, not refereed | Gröber, Désirée et al. | 2011 | |
| 107 | Fretting wear criterion for coated systems with complete contact based on the accumulated specific friction energy | Conference contribution, not refereed | Maiwald, Andreas et al. | 2011 | |
| 108 | Management of energy-related knowledge in integrated product development – concept and selected instruments | Conference contribution, refereed | Götze, Uwe et al. | 2011 | |
| 109 | Experimentelle Untersuchungen zum Übertragungsverhalten von rechteckförmigen Mehrschraubenverbindungen (MSV) | Book contribution | Petersen, Udo et al. | 2011 | |
| 110 | tooth root strength of worm wheels | Weitere Publikation (u.a. Rezension, Lexikonbeitrag), nicht referiert | Reißmann, Jan et al. | 2011 | |
| 111 | Entwicklung eines flexiblen, IT-gestützten und technologieübergreifenden Kalkulationsmodells für die Angebotskalkulation im Werkzeug- und Formenbau | Conference contribution, not refereed | Konarsky, Michael et al. | 2010 | |
| 112 | Einfluss der Wellengestaltung auf die Dauerfestigkeit von Pressverbindungen. | Book contribution | Bružek, Bohumil et al. | 2010 | |
| 113 | Investigation on the Shrink-fitted Assemblies with a Circumferential Groove. | Conference contribution, refereed | Leidich, Erhard et al. | 2010 | |
| 114 | Untersuchungen der Reibwerte von Paarungen mit EN AW-6082 unter Einbeziehung der qualitativen Zuverlässigkeit und der Übertragbarkeit auf Schraubenverbindungen. | Article in trade journal, refereed | Leidich, Erhard et al. | 2010 | |
| 115 | Untersuchungen zur Gestaltfestigkeit von Pressverbindungen. | Article in trade journal, refereed | Leidich, Erhard et al. | 2010 | |
| 116 | Grundlagen der Dimensionierung von Stirnpressverbindungen | Book contribution | Walther, Volkhard et al. | 2010 | |
| 117 | Referenzierte Haftreibungszahlen an Stirnflächenkontakten | Conference contribution, refereed | Leidich, Erhard et al. | 2010 | |
| 118 | Tooth root strength of worm wheels based on fatigue damage hypothesis | Conference contribution, not refereed | Reißmann, Jan et al. | 2010 | |
| 119 | Produktkostenmanagement im Produktentstehungsprozess von Auftragsfertigern : Best Practise | Article in trade journal, not refereed | Leidich, Erhard et al. | 2010 | |
| 120 | Development and implement of a flexible, IT-based andcross-technology calculation model for the pricing of offersin tool and die production | Conference contribution, not refereed | Leidich, Erhard et al. | 2010 | |
| 121 | Toolbox reduction of variety - methods, concepts, solutions and software tools to reduce the internal diversity | Conference contribution, not refereed | Leidich, Erhard et al. | 2010 | |
| 122 | Relativmovements of rolling bearing rings, part 2 | Article in trade journal, refereed | Leidich, Erhard et al. | 2010 | |
| 123 | Einflussfaktoren auf das tribologische Verhalten von biegefreien Wälzlagersitzen bei Relativbewegungen infolge Wandern | Conference contribution, not refereed | Maiwald, Andreas et al. | 2010 | |
| 124 | Elastic-plastic stress of multiple interference fit | Book contribution | Leidich, Erhard et al. | 2010 | |
| 125 | Grundlagenorientierte Untersuchungen zur Reibdauerfestigkeit | Book contribution | Leidich, Erhard et al. | 2010 | |
| 126 | Multiaxial Fatigue Assessment for Notched Bars under Nonproportional Loading Using Integral Stress Approach | Conference contribution, refereed | Leidich, Erhard et al. | 2010 | |
| 127 | Untersuchungen zum Einfluss der Tribokorrosion auf die Gestaltfestigkeit von Pleuel | Book contribution | Leidich, Erhard et al. | 2010 | |
| 128 | A Novel Testing Apparatus for Investigation of Slip Amplitude Effect on Fretting Fatigue | Conference abstract | Leidich, Erhard et al. | 2010 | |
| 129 | Optimization of tooth root strength of worm wheels | Conference abstract | Reißmann, Jan et al. | 2010 | |
| 130 | Integral Approach for Endurance Limit Evaluation on Shrink-Fitted Assemblies. | Article in trade journal, refereed | Leidich, Erhard et al. | 2009 | |
| 131 | Einfluss einer Passfederverbindung auf die Übertragungsfähigkeit dünnwandiger Zahnräder | Article in trade journal, refereed | Leidich, Erhard et al. | 2009 | |
| 132 | Untersuchungen zur Festigkeit von Schrauben aus ultrafeinkörnigem und konventionellem Aluminiumwerkstoff EN AW-7075 | Article in trade journal, refereed | Lang, Heiko et al. | 2009 | |
| 133 | Normen, Toleranzen, Passungen und Technische Oberflächen | Book contribution | Leidich, Erhard et al. | 2009 | |
| 134 | Achsen und Wellen | Book contribution | Leidich, Erhard et al. | 2009 | |
| 135 | Ermittlung und Interpretation von Reibmomenten und Haftreibwerten bei Stirnflächenkontakt metallischer Paarungen | Conference contribution, not refereed | Leidich, Erhard et al. | 2009 | |
| 136 | Testing of tribological functionality of nano-scaled fillers in coatings preventing fretting fatigue | Conference contribution, refereed | Leidich, Erhard et al. | 2009 | |
| 137 | 3D-Kinematiksimulation von Wälzlagerringen | Conference contribution, not refereed | Maiwald, Andreas et al. | 2009 | |
| 138 | Relativbewegungen bei Wälzlagerringen/Dimensionierungshinweise für die Passungswahl, Teil 1 | Article in trade journal, refereed | Leidich, Erhard et al. | 2009 | |
| 139 | Laufeigenschaften kunststoffbeschichteter hydrodynamischer Mehrflächengleitlager | Book contribution | Leidich, Erhard et al. | 2009 | |
| 140 | Teilemanagement und Kostenoptimierung – Lösungskonzepte und Wissenstransfer im IPE-Labor | Conference contribution, not refereed | Leidich, Erhard et al. | 2009 | |
| 141 | Welle-Nabe-Verbindungen | Book contribution | Leidich, Erhard et al. | 2009 | |
| 142 | Investigation into the Strength of Components Made of UFG Aluminium Alloys. | Conference contribution, refereed | Lang, Heiko, (Dr.) et al. | 2008 | |
| 143 | Experimental research into multi-lobe bearings with a plastic liner | Conference contribution, not refereed | Kern, Colin et al. | 2008 | |
| 144 | E-Learning in der Kostenorientierten Produktentwicklung | Article in trade journal, refereed | Götze, Uwe et al. | 2008 | |
| 145 | Fatigue Behaviour of UFG Aluminium Alloys and its Evaluation on Notched Components. | Conference contribution, refereed | Bružek, Bohumil et al. | 2008 | |
| 146 | Experimental Evaluation of Endurance Limit on Shrink-Fitted Assemblies. | Conference contribution, refereed | Leidich, Erhard et al. | 2008 | |
| 147 | Teilemanagement als wesentlicher Beitrag zur Kostenbeeinflussung im Konstruktionsprozess. | Conference contribution, not refereed | Curschmann, Michael et al. | 2008 | |
| 148 | Passung sicher gestellt : Anwendung der Form- und Lagetolerierung auf Passfederverbindungen | Article in trade journal, not refereed | Leidich, Erhard et al. | 2008 | |
| 149 | Innovative design of universal testing device for power train parts subjected to fretting fatigue | Conference contribution, not refereed | Vidner, Jakub et al. | 2008 | |
| 150 | Neuer Referenzprüfstand zur Bestimmung des Haftreibwertes bei Stirnflächenkontakt | Conference contribution, not refereed | Schuller, Stefan et al. | 2008 | |
| 151 | Comparison of statistical evaluation methods by the example of shaft-hub-connections | Conference contribution, not refereed | Winkler, Mike et al. | 2008 | |
| 152 | Berechnung herstellungsbedingter Eigenspannungen in Kunststoffbauteilen und deren Integration in Festigkeitsanalysen. | Conference contribution, not refereed | Leidich, Erhard et al. | 2008 | |
| 153 | Dünnwandige verzahnte Naben mit Passfedernut. | Book contribution | Bružek, Bohumil et al. | 2007 | |
| 154 | Evaluation of crack growth at the weld interface between bronze and steel | Article in trade journal, refereed | Bružek, Bohumil et al. | 2007 | |
| 155 | Experimentelle und numerische Untersuchungen zur Ermittlung der Beanspruchbarkeit von Leichtbauelementen aus EN AW-7075 | Conference contribution, not refereed | Matthes, Klaus-Jürgen et al. | 2007 | |
| 156 | Untersuchungen zur Anrissvorhersage bei dynamisch beanspruchten Welle-Nabe-Verbindungen mit der Methode der kritischen Schnittebene. | Conference contribution, not refereed | Leidich, Erhard et al. | 2007 | |
| 157 | Einfluss der örtlichen Reibdauerbeanspruchung auf die Ermüdungsfestigkeit form- und reibschlüssiger Welle-Nabe-Verbindungen | Book contribution | Vidner, Jakub et al. | 2007 | |
| 158 | Betriebsfestigkeitsanalyse von gefügten Maschinenelementen auf Basis der örtlichen Spannungen am Beispiel von Polygon-Welle-Nabe-Verbindungen | Conference contribution, not refereed | Leidich, Erhard et al. | 2007 | |
| 159 | Enhanced Ruiz criterion for the evaluation of crack initiation in contact subjected to fretting fatigue | Article in trade journal, refereed | Vidner, Jakub et al. | 2007 | |
| 160 | Zur Auslegung der Stirnpressverbindung bei Riemen- und Kettenrädern unter Berücksichtigung von Biege- und Querkraftbelastung | Conference contribution, not refereed | Walther, Volkhard et al. | 2007 | |
| 161 | Design and Dimensioning of Centrally Fastened, Friction-locked Connections in Auxiliary Drive Assemblies | Further publication (e.g. review, encyclopedia contribution), refereed | Walther, Volkhard et al. | 2007 | |
| 162 | Anwendung des modifizierten RUIZ-Kriteriums für die Versagensvorhersage bei reibdauerbeanspruchten Tribosystemen | Conference contribution, not refereed | Vidner, Jakub et al. | 2006 | |
