Equipment

Coordinate measuring technology

Measuring volumen: 500/500/500 [x/y/z in mm]
Max. load: 280 kg
Touch probe: VAST XT Gold (measuring), roughness probe (ROTOS)
Measuring principle: tactile-electrical
Measuring modes: scanning and single point probing
Probing forces: 50 to 1000 mN
Probe: ball probe (ball diameter ≥0.3 mm) with permissible length 500 mm
Length measurement deviation according to ISO 10360-2:2009: MPE(E0)=±(0.7+L/400) µm
Scanning probe deviation according to ISO 10360-4:2000: MPE(THP)=0.9 µm

Measuring volume: 500/500/500 [x/y/z in mm]
Max. load: 100 kg
Touch probe: VAST XXT TL-3 (measuring)
Measuring principle: tactile-electrical
Measuring modes: scanning and single point probing
Probing forces: 10 to >130 mN
Probe: ball probe (ball diameter ≥0.3 mm) with permissible length axially in z 30-150 mm and radially in x/y 65 mm
Length measurement deviation according to ISO 10360-2:2009: MPE(E0)=±(2.4+L/300) µm
Scanning distance deviation according to ISO 10360-4:2000: MPE(THP)=3.8 µm

Measuring volume: unlimited (measuring system), 200/150/150 [x/y/z in mm] (sensor)
Max. load: unlimited, 20 kg (rotary table GOM ROT 350)
Touch probe: ATOS CORE 150 MV 200 (optical)
Measuring principle: 3D triangulation with coded fringe projection
Measuring modes: areal 3D scanning, ATOS (static geometry acquisition), ARAMIS (dynamic geometry acquisition)
Probing forces: 0 mN
Camera resolution: 2x5 Megapixel (2448x2050)
Length measurement deviation according to VDI 2634 sheet 3:2008: MPE(E)= 27.0 µm
Ball distance deviation according to VDI 2634 sheet 3:2008: MPE(SD)= 12.0 µm

Measuring volume: 114/91,5 [x/y in mm]
Max. load: 4kg
Touch probe: CCD Sensor with telezentric lens (optical)
Measuring principle: 2D image processing
Measuring modes: Transmitted and reflected light
Probing forces: 0mN
Magnification: 1:10
Length measurement deviation according to ISO10360-7:2011: MPE(EBXY)=±(4,5+L/100)µm
Repeatability range according to ISO10360-7:2011: MPL(RB)=0,9µm