Springe zum Hauptinhalt
Professur Mikrofertigungstechnik
Veröffentlichungen
Professur Mikrofertigungstechnik 

Veröffentlichungen der Professur Mikrofertigungstechnik

2025

Hanisch, N.; Steinert, P.; Lindner, T.; Liborius, H.; Schubert, A.; Lampke, T.: Scale influence in surface design regarding laser structures for adhesion enhancement in polymer-metal hybrids: A fractal dimension approach. In: Applied Surface Science Advances, 2025, Band 29, 100838, DOI: 10.1016/j.apsadv.2025.100838

Bui, V. D.; Martin, A.; Schubert, A.: Investigation of Magnetic Field assisted Electrical Discharge Sinking of Ti6Al4V. In: Procedia CIRP, 2025, Band 137, S. 431–435, DOI: 10.1016/j.procir.2025.02.285

Martin, A.; Javed, T.; Danilov, I.; Lein, T.; Šimůnková, L.; Schneider, M.; Schubert, A.; Michaelis, A.: Confinement of the Removal in Jet-Electrochemical Machining of Solid-state Sintered Silicon Carbide. In: Procedia CIRP, 2025, Band 137, S. 58–63, DOI: 10.1016/j.procir.2025.01.111

Javed, M. A.; Weidner, A.; Ebermann, M.; Steinert, P.; Zipplies, D.; Hinze, M.; Schaarschmidt, I.; Martin, A.; Hasse, A.; Wagner, M. F.-X.; Schubert, A.; Richter, M.: Characterization of Thin NiTi-Based Shape Memory Alloy Sheets with Different Surface Properties for Utilization in Elastocaloric Regenerators. In: Shape Memory and Superelasticity, 2025, DOI: 10.1007/s40830-025-00561-w

Lampke, T.; Schubert, A.; Steinert, P.; Hanisch, N.; Liborius, H.; Lindner, T.; Nestler, A.; Schaarschmidt, I.: Fraktale Gestaltungsprinzipien zur definierten Einstellung der interlaminaren Festigkeit von Metall-Thermoplast-Verbunden. In: Abschlussbericht DFG-Sachbeihilfe LA 1274/66-1 und SCHU 1484/38-1, 2025, DOI: 10.34657/19377

Martin, A.; Javed, T.; Quitzke, S.; Danilov, I.; Schubert, A.: Investigation of process parameters for plasma-electrolytic polishing of copper with an environmentally friendly electrolyte. In: Proc. euspen’s 25th International Conference & Exhibition, 2025, S. 88–91, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-6-3, URL: https://www.euspen.eu/knowledge-base/ICE25113.pdf

Nguyen, L. T.; Bui, V. D.; Martin, A.; Liborius, H.; Schubert, A.: Investigation of surface modification for sustainable antibacterial properties. In: Proc. euspen’s 25th International Conference & Exhibition, 2025, S. 92–95, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-6-3, URL: https://www.euspen.eu/knowledge-base/ICE25116.pdf

Sahu, A. K.; Mahapatra, S. S.; Martin, A.; Schubert, A.; Leite, M.; Peças, P.: Electrical discharge machining by rapid tools prepared by micro stereo-lithography process with copper metallization. In: Scientific Reports, 2025, Band 15(1), 22667, DOI: 10.1038/s41598-025-07020-7

Schanner, J.; Hasse, A.; Junge, T.; Schubert, A.: Surfaces microstructured by turn-milling: Insights in contact mechanics and coefficient of friction from experimental, numerical and theoretical analyses. In: Tribology International, 2025, 110894, DOI: 10.1016/j.triboint.2025.110894

Schaarschmidt, I.: Beitrag zur modellbasierten Prozessanalyse des elektrochemischen Präzisionsabtragens von rotationssymmetrischen Außengeometrien (Dissertation). In: Precision and Microproduction Engineering, 2025, Band 17, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, DOI: 10.60687/2025-0033

Rezaei, M. H.; Schaarschmidt, I.; Liborius, H.; Hanisch, N.; Steinert, P.; Lampke, T.; Schubert, A.: Surface microstructuring by targeted burr formation using Ultrasonic Vibration Assisted Deformational Machining (UVADM) for improving polymer-metal bonding. In: Procedia CIRP, 2025, Band 133, S. 549–554, DOI: 10.1016/j.procir.2025.02.094

Börner, R.; Helmreich, T.; Göltz, M.; Bandaru, N. K.; Steinert, P.; Schaarschmidt, I.; Rosiwal, S.; Schubert, A.: Simulation of the stress distribution in diamond coatings applied by chemical vapor deposition on martensitic stainless steel X46Cr13 with a deterministic surface microstructure. In: Thin Solid Films, 2025, Band 815, 140646, DOI: 10.1016/j.tsf.2025.140646

Prochatzki, G.; Mayer, R.; Steinert, P.; Nestler, A.; Schubert, A.: Reibungsreduzierung in hydraulischen Fahrzeugschwingungsdämpfern mithilfe mikrostrukturierter Oberflächen. In: Berichte aus dem Fahrzeugsystemdesign 2024, 2025, Band 822, S. 83–97, Hrsg.: Ralph Mayer, VDI Verlag GmbH, ISBN: 978-3-18-382212-6

Börner, R.; Helmreich, T.; Göltz, M.; Steinert, P.; Rosiwal, S.; Schubert, A.: Erzeugung hierarchisch gegliederter Oberflächenfeingestalten durch spanende Verfahren zur Reduzierung von Eigenspannungen in CVD-Diamantschichten auf Stahl. In: Abschlussbericht DFG-Sachbeihilfe RO 2366/11-1 und 13-3 sowie SCHU 1484/24-1 und 27-3, 2025, DOI: 10.60687/2025-0023

Guo, P.; Martin, A.; Zhai, C.; Li, Z.; Lu, X.; Yu, J.; Lin, X.; Odnevall, I.; Gibbons, M.; Schubert, A.: Effect of current density on electrochemical machining process of laser powder bed fusion manufactured Inconel 718. In: Journal of Materials Processing Technology, 2025, 118748, DOI: 10.1016/j.jmatprotec.2025.118748

2024

Martin, A.; Quitzke, S.; Krzyzanek, M.; Seelke, A.; Bergmann, N.; Schubert, A.: Setup for flat jet electrochemical cleaning of weld seams. In: Proceedings of the 20th International Symposium on Electrochemical Machining Technology, 2024, S. 149–156, Hrsg.: Bergs, T.; Sambou, E. T.; Petersen, T.; Herrig, T.; Klink, A., DOI: 10.18154/RWTH-2024-10246

Lein, T.; Šimůnková, L.; Danilov, I.; Schaarschmidt, I.; Martin, A.; Kutzer-Schulze, C.; Schneider, M.; Schubert, A.; Michaelis, A.: Solid-State Electrochemistry of SiC Ceramics - Experiment vs. Simulation. In: Proceedings of the 20th International Symposium on Electrochemical Machining Technology, 2024, S. 125–132, Hrsg.: Bergs, T.; Sambou, E. T.; Petersen, T.; Herrig, T.; Klink, A., DOI: 10.18154/RWTH-2024-10243

Danilov, I.; Quitzke, S.; Schaarschmidt, I.; Steinert, P.; Schubert, A.: Modelling of the vapor-gas-envelope formation during plasma electrolytic polishing. In: Proceedings of the 20th International Symposium on Electrochemical Machining Technology, 2024, S. 101–108, Hrsg.: Bergs, T.; Sambou, E. T.; Petersen, T.; Herrig, T.; Klink, A., DOI: 10.18154/RWTH-2024-10240

Quitzke, S.; Martin, A.; Eberhardt, K.; Schubert, A.: Process design of plasma electrolytic rounding of cutting tool inserts with consideration of efficiency. In: Proceedings of the 20th International Symposium on Electrochemical Machining Technology, 2024, S. 41–49, Hrsg.: Bergs, T.; Sambou, E. T.; Petersen, T.; Herrig, T.; Klink, A., DOI: 10.18154/RWTH-2024-10233

Liborius, H.; Werner, J. M.; Nestler, A.; Drossel, W.-G.; Schubert, A.: Discrete Analysis of the Ultrasonic Vibration Superimposed Turning Process by Orthogonal Cutting Experiments. In: Proceedings of the ICPE2024: The 20th International Conference on Precision Engineering, 2024, OS05-01

Bui, V. D.; Martin, A.; Berger, T.; Steinert, P.; Schubert, A.: Antibacterial Surface Protection using Electrical Discharge Machining with Zinc Tool Electrode for Medical Devices. In: Procedia CIRP, 2024, Band 125, S. 278–283, DOI: 10.1016/j.procir.2024.08.058

Hanisch, N.; Dittes, A.; Steinert, P.; Liborius, H.; Lindner, T.; Schubert, A.; Lampke, T.: Quantitative design criterion for mechanical interface functionalization regarding adhesion strength in chemically pre-treated polymer-metal hybrids using fractal dimension. In: The Journal of Adhesion, 2024, S. 1–19, DOI: 10.1080/00218464.2024.2395431

Quitzke, S.; Danilov, I.; Morgenstern, R.; Martin, A.; Lampke, T.; Schubert, A.: Microstructure and topography of laterally confined porous anodic oxides produced with high growth rate in a maskless two-phase jet setup. In: Journal of Applied Electrochemistry, 2024, DOI: 10.1007/s10800-024-02192-y

Rymer, L.-M.; Winter, L.; Liborius, H.; Lindner, T.; Schubert, A.; Lampke, T.: The combination of diamond smoothing and intermediate cooling during wire arc spraying of Ni-5w%Al on EN 1.0032 to improve the high-cycle fatigue behavior. In: Surface and Coatings Technology, 2024, Band 489, 131145, DOI: 10.1016/j.surfcoat.2024.131145

Martin, A.; Quitzke, S.; Eberhardt, K.; Schubert, A.: Influence of plasma-electrolytic rounding on chemical composition, roughness and cutting edge radius of cemented carbide cutting tool inserts. In: Proc. euspen’s 24th International Conference & Exhibition, 2024, S. 377–380, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-5-6, URL: https://www.euspen.eu/knowledge-base/ICE24124.pdf

Junge, T.; Mehner, T.; Nestler, A.; Schubert, A.; Lampke, T.: Thermomechanical impact of the cutting edge microgeometry on the surface properties in turning of aluminium alloys. In: Proc. euspen’s 24th International Conference & Exhibition, 2024, S. 289–292, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-5-6, URL: https://www.euspen.eu/knowledge-base/ICE24197.pdf

Bui, V. D.; Martin, A.; Berger, T.; Schubert, A.: Zinc nano-powder mixed electrical discharge machining for antibacterial surface modification. In: Proc. euspen’s 24th International Conference & Exhibition, 2024, S. 365–368, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-5-6, URL: https://www.euspen.eu/knowledge-base/ICE24125.pdf

Bui, V. D.; Martin, A.; Berger, T.; Harnisch, K.; Döring, J.; Bertrand, J.; Schubert, A.: Ultrasonic Vibration assisted Silver Integration by Powder Mixed EDM for Antibacterial Surfaces. In: Procedia CIRP, 2024, Band 123, S. 410–415, DOI: 10.1016/j.procir.2024.05.072

Bui, V. D.; Martin, A.; Berger, T.; Schubert, A.: Investigation of Surface Characteristics in Magnetic Field assisted Electrical Discharge Machining. In: Procedia CIRP, 2024, Band 123, S. 416–421, DOI: 10.1016/j.procir.2024.05.073

Bandaru, N. K.; Liborius, H.; Steinert, P.; Hanisch, N.; Nestler, A.; Lampke, T.; Schubert, A.: Surface microstructuring by Ultrasonic Vibration Assisted Deformational Machining (UVADM) – Simulation and experimental results. In: Procedia CIRP, 2024, Band 123, S. 280–285, DOI: 10.1016/j.procir.2024.05.050

Hanisch, N.; Steinert, P.; Saborowski, E.; Liborius, H.; Lindner, T.; Bandaru, N. K.; Schubert, A.; Lampke, T.: Comparison of 2D and 3D measurement methods for evaluating laser structured aluminum surfaces using fractal dimension. In: Procedia CIRP, 2024, Band 123, S. 286–291, DOI: 10.1016/j.procir.2024.05.051

Börner, R.; Helmreich, T.; Schubert, A.; Rosiwal, S.: Influence of the width of cut in ultrasonic vibration superimposed face milling of X46Cr13 and X40CrMoV5-1 on the surface microstructure and CVD diamond coating adhesion. In: Procedia CIRP, 2024, Band 123, S. 215–220, DOI: 10.1016/j.procir.2024.05.039

Börner, R.; Steinert, P.; Bandaru, N. K.; Schubert, A.: Finite Element Analysis of Plastic Deformation in Ultrasonic Vibration Superimposed Face Milling of Steel X46Cr13. In: Micromachines, 2024, Band 15(6), 730, DOI: 10.3390/mi15060730

Thielecke, A.; Hackert-Oschätzchen, M.; Meichsner, G.; Berger, T.; Loebel, S.; Martin, A.; Schulze, R.; Schubert, A.: Simulation-based analysis of electrical current induction in a device for electrochemical precision machining of Nd Fe B permanent magnets. In: Materials Research Proceedings, 2024, Band 41, S. 2400–2409, DOI: 10.21741/9781644903131-264

Loebel, S.; Schaarschmidt, I.; Steinert, P.; Pöhlmann, C.; Weitzenberg, J.; Hein, M.; Lachmann, I.; Gärtner, E.; Eckert, U.; Schubert, A.: Design of capillary force controlled POCT devices using multiscale simulation methods. Poster: POCT-Meeting – Point-of-Care Diagnostics: Innovation from assays, microfluidics to production, Leipzig, 17.–18.04.2024

Liborius, H.; Lindner, T.; Nestler, A.; Lampke, T.; Schubert, A.: Zusammenhänge zwischen den Prozessbedingungen und den resultierenden Oberflächeneigenschaften beim Diamantglätten am Beispiel der Bearbeitung thermisch gespritzter Schichten. Vortrag: 72. Sitzung des DGM-FA "Mechanische Oberflächenbehandlungen", Freiburg, 10.04.2024

Braun, S.; Loebel, S.; Haumann, I.; Becker, M.; Süß, K.-T.: Aluminium als Material für die Leiterplattentechnik – Neuerungen in der prozesstechnischen Umsetzung. In: EBL 2024 – Elektronische Baugruppen und Leiterplatten: Nachhaltigkeit und Energieeffizienz mit smarter Elektronik, 2024, S. 177–183, ISBN: 978-3-8007-6265-1

Junge, T.; Mehner, T.; Nestler, A.; Lampke, T.; Schubert, A.: Methodology for soft-sensor design and in-process surface conditioning in turning of aluminum alloys. In: Production Engineering, 2024, Band 18(2), S. 267–287, DOI: 10.1007/s11740-023-01260-0

Böttcher, F.; Schaarschmidt, I.; Edelmann, J.; Schubert, A.: Simulation-Assisted Tool Design for Pulsed Electrochemical Machining of Magnetic Shape-Memory Alloys. In: Journal of Manufacturing and Materials Processing, 2024, Band 8(2), 46, DOI: 10.3390/jmmp8020046

Eiselt, P.; Hirsch, S. J.; Özdemir, I.; Nestler, A.; Grund, T.; Schubert, A.; Lampke, T.: Ultrasonic-Vibration-Superimposed Face Turning of Aluminium Matrix Composite Components for Enhancing Friction-Surface Preconditioning. In: Journal of Manufacturing and Materials Processing, 2024, Band 8(1), 32, DOI: 10.3390/jmmp8010032

Büssemaker, H.; Meinshausen, A.-K.; Bui, V. D.; Döring, J.; Voropai, V.; Buchholz, A.; Mueller, A. J.; Harnisch, K.; Martin, A.; Berger, T.; Schubert, A.; Bertrand, J.: Silver-integrated EDM processing of TiAl6V4 implant material has antibacterial capacity while optimizing osseointegration. In: Bioactive Materials, 2024, Band 31, S. 497–508, DOI: 10.1016/j.bioactmat.2023.08.019

2023

Fritsching, U.; Buss, L.; Tonn, T.; Schumski, L.; Gakovi, J.; Hatscher, J. D.; Sölter, J.; Avila, K.; Karpuschewski, B.; Gerken, J. F.; Wolf, T.; Biermann, D.; Menze, C.; Möhring, H.-C.; Tchoupe, E.; Heidemanns, L.; Herrig, T.; Klink, A.; Nabbout, K.; Sommerfeld, M.; Luther, F.; Schaarschmidt, I.; Schubert, A.; Richter, M.: Flow Visualisation and Evaluation Studies on Metalworking Fluid Applications in Manufacturing Processes—Methods and Results. In: Processes, 2023, Band 11(9), 2690, DOI: 10.3390/pr11092690

Martin, A.; Berger, T.; Loebel, S.; Schulze, R.; Thielecke, A.; Hackert-Oschätzchen, M.; Schubert, A.: Accuracy of pulsed electrochemical machining of NdFeB rotor magnets. In: Proceedings of the 19th International Symposium on Electrochemical Machining Technology, 2023, S. 65–70, Hrsg.: Bähre, D.; Hall, T.; Zeiner, M., ISBN: 978-3-00-077159-0

Quitzke, S.; Martin, A.; Eberhardt, K.; Schubert, A.: Development of a suitable electrolyte and voltage for plasma electrolytic rounding of cutting edges on cemented carbide tools. In: Proceedings of the 19th International Symposium on Electrochemical Machining Technology, 2023, S. 86–91, Hrsg.: Bähre, D.; Hall, T.; Zeiner, M., ISBN: 978-3-00-077159-0

Schaarschmidt, I.; Steinert, P.; Schubert, A.: Simulation Based Design of a Bladeless Centrifugal Flow Compressor. Poster: European COMSOL Conference, München, 25.–27.10.2023, URL: https://www.comsol.com/paper/123381

Loebel, S.; Braun, S.; Becker, M.; Steinert, P.; Schubert, A.: Modeling Electrochemical Deposition of Aluminum from Ionic Liquids for PCB Applications. In: Proceedings of the European COMSOL Conference, 2023, URL: https://www.comsol.com/paper/123401

Lindner, T.; Tapia Cabrera, J. E.; Preuß, B.; Chocholatý, O.; Jarolímová, L.; Houdková, Š.; Björklund, S.; Joshi, S.; Liborius, H.; Schubert, A.; Lampke, T.: Kaltverfestigungsfähige Beschichtungswerkstoffe auf Eisenbasis - Verarbeitungs- und Gebrauchseigenschaften. In: Tagungsband zum 12. HVOF-Kolloquium, 2023, S. 21–29, ISSN: 1612-6750

Bui, V. D.: Antibacterial surface functionalization by silver nano-powder mixed electrical discharge machining of biomaterials. Vortrag: Jahrestagung der Deutschen Gesellschaft für Biomaterialien (DGBM), Jena, 14.–16.09.2023

Ferse, K.; Börner, R.; Nestler, A.; Helmreich, T.; Meschede, S.; Göltz, M.; Rosiwal, S.: Kohlenstoffschichten – was sie können, wo Experten tagen. In: Galvanotechnik, 2023, Band 114(8), S. 1042–1045, ISSN: 0016-4232

Danilov, I.; Schaarschmidt, I.; Steinert, P.: Phasenübergang effektiv nutzen. In: HZwei, 2023, Band 23(4), S. 40–42, ISSN: 1862-393X, URL: https://www.hzwei.info/heftarchiv/ausgabe-04-2023

Schubert, A.; Nestler, A.: Möglichkeiten und Grenzen der Mikrozerspanung. Vortrag: 24. Dresdner Werkzeugmaschinen-Fachseminar, Dresden, 03.–04.07.2023

Martin, A.: Antibakterielle Funktionalisierung durch Silberabscheidung während der Funkenerosion von Implantatoberflächen. Vortrag: Implantate – Wenn die Antwort in der Schicht steckt!, Tuttlingen, 27.–28.02.2023, URL: https://efds.org/event/ws-implant/

Bui, V. D.; Berger, T.; Martin, A.; Harnisch, K.; Döring, J.; Bertrand, J.; Schubert, A.: Effects of ultrasonic vibration on the silver deposition in powder mixed EDM for antibacterial surface modification. In: Proc. euspen’s 23rd International Conference & Exhibition, 2023, S. 89–92, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-3-2, URL: https://www.euspen.eu/knowledge-base/ICE23223.pdf

Martin, A.; Quitzke, S.; Morgenstern, R.; Schubert, A.; Lampke, T.: Concentric jet for confined mask-less anodic dissolution and oxidation of aluminium. In: Proc. euspen’s 23rd International Conference & Exhibition, 2023, S. 99–102, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-3-2, URL: https://www.euspen.eu/knowledge-base/ICE23220.pdf

Clauß, B.; Mironow, A.; Yildirim, M.; Schubert, A.: Investigations in drilling of difficult‐to‐cut materials using twist drills with solid binderless diamond tips. In: Proc. euspen’s 23rd International Conference & Exhibition, 2023, S. 517–520, Hrsg.: O. Riemer, C. Nisbet, D. Phillips, ISBN: 978-1-9989991-3-2, URL: https://www.euspen.eu/knowledge-base/ICE23254.pdf

Schaarschmidt, I.; Luther, F.; Steinert, P.; Richter, M.; Schubert, A.: Simulation of the magnetic field assisted electrochemical machining. In: Procedia CIRP, 2023, Band 117, S. 249–256, DOI: 10.1016/j.procir.2023.03.043

Junge, T.; Loebel, S.; Berger, A.; Steinert, P.; Schubert, A.: Thermodynamic simulation of the heat distribution inside the specimen in turning of aluminum alloys. In: Procedia CIRP, 2023, Band 117, S. 92–97, DOI: 10.1016/j.procir.2023.03.017

Thielecke, A.; Hackert-Oschätzchen, M.; Komilov, N.; Meichsner, G.; Petzold, T.; Loebel, S.; Martin, A.; Schulze, R.; Schubert, A.: Simulation-based analysis of electrical current induction in electrochemical precision machining of Nd-Fe-B permanent magnets. In: Procedia CIRP, 2023, Band 117, S. 225–230, DOI: 10.1016/j.procir.2023.03.039

Nestler, A.: Charakterisieren und Messen von Schneidkanten – Standardisierung durch VDI-Richtlinien 2654. Vortrag: Wernesgrüner Werkzeugsymposium 2023, Wernesgrün, 25.–27.04.2023

Luther, F.; Schaarschmidt, I.; Schubert, A.; Richter, M.: Strömungscharakterisierung im Arbeitsspalt beim magnetfeldüberlagerten elektrochemischen Abtragen. In: tm - Technisches Messen, 2023, Band 90(5), S. 268–281, DOI: 10.1515/teme-2022-0109

Göltz, M.; Helmreich, T.; Börner, R.; Kupfer, T.; Schubert, A.; Rosiwal, S.: Spatial distribution of thermally induced residual stresses in HF-CVD diamond coatings on microstructured steel surfaces. In: Diamond and Related Materials, 2023, 109931, DOI: 10.1016/j.diamond.2023.109931

Javed, M. A.; Maaß, B.; Zipplies, D.; Schubert, A.; Richter, M.: Apparatus for measuring the emissivity of Nickel-Titanium shape memory alloys. Vortrag: 23. Werkstofftechnisches Kolloquium, Chemnitz, 29.–30.03.2023

Liborius, H.; Lindner, T.; Nestler, A.; Lampke, T.; Schubert, A.: Influence of the cutting edge geometry in machining of thermally sprayed high entropy alloy coatings. Vortrag mit Abstract: 23. Werkstofftechnisches Kolloquium, Chemnitz, 29.–30.03.2023, ISBN: 978-3-949005-07-7

Lindner, T.; Čtvrtlík, R.; Tomáštík, J.; Vladescu, A.; Liborius, H.; Schubert, A.; Lampke, T.: Work hardening of X120Mn12 by diamond smoothing to increase the fracture resistance of thin films under local impact load. Vortrag: 23. Werkstofftechnisches Kolloquium, Chemnitz, 29.–30.03.2023

Funke, R.; Schubert, A.: Turn-Milled High-Friction Surfaces—Investigations on the Influence of Nominal Surface Pressure and Load Direction. In: Smart, Sustainable Manufacturing in an Ever-Changing World – Proceedings of International Conference on Competitive Manufacturing (COMA ’22). Lecture Notes in Production Engineering, 2023, S. 749–762, Hrsg.: von Leipzig, K.; Sacks, N.; Mc Clelland, M., Springer International Publishing, DOI: 10.1007/978-3-031-15602-1_54

Thielen, S.; Subramanian, T.; Sauer, B.; Koch, O.; Börner, R.; Junge, T.; Schubert, A.: Characterisation of the conveying effect of turned radial shaft seal counter-surfaces using a simplified hydrodynamic simulation model. In: Forschung im Ingenieurwesen, 2023, DOI: 10.1007/s10010-023-00610-9

Saborowski, E.; Steinert, P.; Lindner, T.; Schubert, A.; Lampke, T.: Pin-Shaped Surface Structures Generated by Laser Single Pulse Drilling for High-Strength Interfaces in Thermally Joined Polymer–Metal Hybrids. In: Materials, 2023, Band 16(2), 687, DOI: 10.3390/ma16020687

Hirsch, S. J.; Eiselt, P.; Özdemir, I.; Grund, T.; Nestler, A.; Lampke, T.; Schubert, A.: Investigation of the Tribological Behaviour of Various AMC Surfaces against Brake Lining Material. In: Materials, 2023, Band 16(3), 1001, DOI: 10.3390/ma16031001

Quitzke, S.; Danilov, I.; Martin, A.; Morgenstern, R.; Lampke, T.; Schubert, A.: Simulation-Assisted Process Design and Experimental Verification of Laterally Confined Oxide Areas Generated with Continuous Electrolytic Free Jet on EN AW-7075 Aluminum Alloy. In: Micromachines, 2023, Band 14(2), 293, DOI: 10.3390/mi14020293

2022

Hanisch, N.; Lindner, T.; Liborius, H.; Preuß, B.; Schubert, A.; Lampke, T.: Kombinierte Oberflächentechnik für den Verschleißschutz. In: WOMAG Kompetenz in Werkstoff und funktioneller Oberfläche, 2022, Band 11(12), S. 16–17, ISSN: 2195-5905

Bui, V. D.: Powder mixed electrical discharge machining for antibacterial surface modification of Ti6Al4V (Dissertation). In: Scripts Precision and Microproduction Engineering, 2022, Band 16, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-95735-156-2

Steinert, P.; Danilov, I.; Zinecker, M.; Moritz, R.; Schmiedel, R.; Enders, F.; Krähmer, T.; Reif, A.; Fischer, H.; von Unwerth, T.; Schubert, A.: Design and characterization of a metallic bipolar plate based on phase change cooling with modified surfaces. In: FC³ – 2nd Fuel Cell Conference Chemnitz 2022 – Saubere Antriebe. Effizient Produziert., 2022, URL: https://nbn-resolving.org/urn:nbn:de:bsz:ch1-qucosa2-764515

Funke, R.; Schmidt, T.; Schubert, A.; Edelmann, J.: Mikrostrukturierung von Bohrungsmantelflächen. In: wt Werkstattstechnik online, 2022, Band 112(6), S. 430–435, DOI: 10.37544/1436-4980-2022-06-80

Börner, R.; Junge, T.; Subramanian, T.; Thielen, S.; Koch, O.; Schubert, A.: Elastic–Plastic Material Deformation and Conveying Value of Twist-Free Turned Surfaces. In: Surfaces, 2022, Band 5(3), S. 395–412, DOI: 10.3390/surfaces5030029

Lindner, T.; Preuß, B.; Lampke, T.; Liborius, H.; Schubert, A.: Fortschrittliche Oberflächentechnik - Merkmale, Mikrostrukturen und Eigenschaften: Verbesserung der Scratchbeständigkeit von Spark-Plasma-gesintertem und HVOF-gespritztem hochmanganhaltigem Stahl durch Drehen und Diamantglätten. In: Tagungsband zum 8. GTV Kolloquium Thermisches Spritzen & Laser Cladding, 2022, S. 15–29, ISSN: 1610-0530

Lindner, T.; Liborius, H.; Preuß, B.; Hanisch, N.; Schubert, A.; Lampke, T.: Gradation of surface properties of high-manganese steel X120Mn12 coating systems by turning and diamond smoothing. Vortrag: 6th International Thermal Spraying and Hardfacing Conference (ISTHC), Wrocław, 22.–23.09.2022

Schubert, A.; Bui, V. D.; Schaarschmidt, I.; Berger, T.; Martin, A.: Developments in Powder Mixed EDM and its perspective Application for targeted Surface Modification. In: Procedia CIRP, 2022, Band 113, S. 100–119, DOI: 10.1016/j.procir.2022.09.134

Bertrand, J.; Meinshausen, A.-K.; Büssemaker, H.; Bui, V. D.; Döring, J.; Voropai, V.; Müller, A. J.; Martin, A.; Berger, T.; Schubert, A.: Silver-integrated EDM processing of TiAl6V4 implant material has antibacterial capacity while optimizing osseointegration. Vortrag: World Orthopaedic Research Congress of the International Combined Orthopaedic Research Societies 2022, Edinburgh, 07.–09.09.2022

Clauß, B.; Funke, R.; Mironow, A.; Yildirim, M.: Laserbearbeitung von wendelgenuteten Mikrobohrwerkzeugen mit Diamantkrone. In: Diamond Business, 2022, Band 83(4), S. 12–17, ISSN: 1619-5558

Luther, F.; Schaarschmidt, I.; Schubert, A.; Richter, M.: Strömungscharakterisierung im Spalt beim magnetfeldüberlagerten elektrochemischen Abtragen. In: Tagungsband zur 29. Fachtagung Experimentelle Strömungsmechanik, 2022, 47, ISBN: 978-3-9816764-8-8

Schanner, J.; Funke, R.; Schubert, A.; Hasse, A.: Investigating the Friction Behavior of Turn-Milled High Friction Surface Microstructures under Different Tribological Influence Factors. In: Journal of Manufacturing and Materials Processing, 2022, Band 6(6), 143, DOI: 10.3390/jmmp6060143

Schaarschmidt, I.; Steinert, P.; Schubert, A.: Influence of electrolyte flow conditions on magnetic-field assisted electrochemical machining. In: Proceedings of the 18th International Symposium on Electrochemical Machining Technology, 2022, S. 165–170, Hrsg.: Koyano, T.; Uchiyama, M., ISBN: 978-4-915698-21-7

Loebel, S.; Petzold, T.; Martin, A.; Steinert, P.; Schubert, A.; Thielecke, A.; Meichsner, G.; Hackert-Oschätzchen, M.; Schulze, R.: Comparison of electrochemical removal characteristics between magnetized and demagnetized NdFeB. In: Proceedings of the 18th International Symposium on Electrochemical Machining Technology, 2022, S. 51–56, Hrsg.: Koyano, T.; Uchiyama, M., ISBN: 978-4-915698-21-7

Junge, T.; Mehner, T.; Nestler, A.; Schubert, A.; Lampke, T.: Thermomechanische Aspekte beim Drehen hochfester Aluminiumlegierungen – Einfluss von Spanleitstufen auf die Oberfläche. In: wt Werkstattstechnik online, 2022, Band 112(11-12), S. 773–778, DOI: 10.37544/1436-4980-2022-11-12-47

Funke, R.; Schanner, J.; Hasse, A.; Schubert, A.: Generation of friction-increasing surfaces by turn-milling. In: Journal of Manufacturing Processes, 2022, Band 80, S. 504–514, DOI: 10.1016/j.jmapro.2022.05.047

Lindner, T.; Liborius, H.; Töberling, G.; Vogt, S.; Preuß, B.; Rymer, L.-M.; Schubert, A.; Lampke, T.: High-Speed Laser Metal Deposition of CrFeCoNi and AlCrFeCoNi HEA Coatings with Narrow Intermixing Zone and Their Machining by Turning and Diamond Smoothing. In: Coatings, 2022, Band 12(7), 879, DOI: 10.3390/coatings12070879

Frotscher, O.; Schaarschmidt, I.; Lauwers, D.; Paul, R.; Meinke, M.; Steinert, P.; Schubert, A.; Schröder, W.; Richter, M.: Investigation of Lorentz force–induced flow of NaNO3-electrolyte for magnetic field–assisted electrochemical machining. In: Int J Adv Manuf Technol, 2022, Band 121, S. 937–947, DOI: 10.1007/s00170-022-09349-z

Lamottke, M.; Micke, L.; Zeidler, H.; Berger, T.; Loebel, S.; Martin, A.; Schubert, A.; Steinert, P.; Müller, P.: Efficient Fused Filament Fabrication of Large-Scale Parts with High Resolution. In: Proceedings of the 2022 Summer Topical Meeting on Advancing Precision in Additive Manufacturing, 2022, S. 126–130, ISBN: 978-1-887706-55-1

Junge, T.; Žůrek, F.; Nestler, A.; Schubert, A.: Manufacturing of Twist-Free Hardened Surfaces by Start-Stop Turning Method. In: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), 2022, S. 203–211, DOI: 10.1007/978-3-030-78424-9_23

Danilov, I.; Quitzke, S.; Martin, A.; Steinert, P.; Zinecker, M.; Schubert, A.: Influence of Plasma Electrolytic Polishing on Surface Roughness of Steel, Aluminum and Cemented Carbide. In: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), 2022, S. 265–273, DOI: 10.1007/978-3-030-78424-9_30

Quitzke, S.; Kröning, O.; Safranchik, D.; Zeidler, H.; Danilov, I.; Martin, A.; Böttger-Hiller, F.; Essel, S.; Schubert, A.: Design and setup of a jet-based technology for localized small scale Plasma electrolytic Polishing. In: Journal of Manufacturing Processes, 2022, Band 75, S. 1123–1133, DOI: 10.1016/j.jmapro.2022.01.064

Lindner, T.; Liborius, H.; Preuß, B.; Hanisch, N.; Schubert, A.; Lampke, T.: Enhanced Abrasion Resistance of Spark Plasma Sintered and HVOF Sprayed Hadfield High Manganese Steel by Turning and Diamond Smoothing. In: Journal of Manufacturing and Materials Processing, 2022, Band 6(2), 48, DOI: 10.3390/jmmp6020048

Lindner, T.; Liborius, H.; Preuß, B.; Hanisch, N.; Schubert, A.; Lampke, T.: Enhanced abrasion resistance of HVOF and laser clad hadfield steel coatings by turning and diamond smoothing. Vortrag: International thermal spray conference and exposition (ITSC), Wien, 04.–06.05.2022

Loebel, S.; Penzel, M.; Berger, T.; Martin, A.; Steinert, P.; Schubert, A.; Micke, L.; Stepputat, V. N.; Lamottke, M.; Zeidler, H.: Simulationsbasierte Gestaltung geeigneter Betriebsparameter für Filamentextrusion mit variabler Düsenöffnung. Poster: 3. Fachtagung Werkstoffe und Additive Fertigung, Dresden, 11.–13.05.2022

Junge, T.; Mehner, T.; Nestler, A.; Schubert, A.; Lampke, T.: Surface properties in turning of aluminum alloys applying different cooling strategies. In: Procedia CIRP, 2022, Band 108, S. 246–252, DOI: 10.1016/j.procir.2022.03.043

Liborius, H.; Lindner, T.; Nestler, A.; Uhlig, T.; Lampke, T.; Wagner, G.; Schubert, A.: Surface hardening in finishing of sintered and thermal sprayed X120Mn12. In: Procedia CIRP, 2022, Band 108, S. 216–221, DOI: 10.1016/j.procir.2022.03.038

Eiselt, P.; Hirsch, S. J.; Nestler, A.; Grund, T.; Schubert, A.; Lampke, T.: Influence of the kinematic roughness resulting from facing of AMC specimens on preconditioning of friction surfaces. In: Procedia CIRP, 2022, Band 108, S. 1–6, DOI: 10.1016/j.procir.2022.03.006

Petzold, T.; Martin, A.; Schubert, A.: Electrochemical material removal characteristics of a NdFeB permanent magnet. In: Proc. euspen’s 22nd International Conference & Exhibition, 2022, S. 293–296, ISBN: 978-1-9989991-1-8, URL: https://www.euspen.eu/knowledge-base/ICE22212.pdf

Bui, V. D.; Meinshausen, A.-K.; Berger, T.; Martin, A.; Harnisch, K.; Bertrand, J.; Schubert, A.: Study on flushing condition for improving silver deposition in silver nano-powder mixed EDM. In: Proc. euspen’s 22nd International Conference & Exhibition, 2022, S. 289–292, ISBN: 978-1-9989991-1-8, URL: https://www.euspen.eu/knowledge-base/ICE22157.pdf

2021

Rosiwal, S.; Helmreich, T.; Göltz, M.; Meschede, S.; Börner, R.; Schubert, A.: Haftfeste kristalline Diamantschichten auf Stahlgleitringen als Hochleistungs-Tribopaarung bei Wasserschmierung oder partiellem Trockenlauf. In: Tagungsband zur 62. Tribologie-Fachtagung, 2021, S. P7/1–P7/9, ISBN: 978-3-9817451-6-0, URL: https://nbn-resolving.org/urn:nbn:de:101:1-2021101911400530647795

Schaarschmidt, I.; Paul, R.; Steinert, P.; Frotscher, O.; Richter, M.; Schubert, A.: Simulation based design of magnetic-field assisted electrochemical machining. In: Proceedings of the 17th International Symposium on Electrochemical Machining Technology, 2021, S. 297–302, Hrsg.: Reynaerts, D.; Saxena, K., ISBN: 978-9-08289-313-7

Martin, A.; Pfaffendorf, F.; Steinert, P.; Šimůnková, L.; Schneider, M.; Schubert, A.: Jet-Electrochemical Machining of SSiC. In: Proceedings of the 17th International Symposium on Electrochemical Machining Technology, 2021, S. 147–153, Hrsg.: Reynaerts, D.; Saxena, K., ISBN: 978-9-08289-313-7

Martin, A.; Pfaffendorf, F.; Liborius, H.; Uhlig, T.; Lindner, T.; Schubert, A.; Wagner, G.; Lampke, T.: Jet-Electrochemical Surface Structuring of AlCoCrFeNiTi High-Entropy Alloy. In: Proceedings of the 17th International Symposium on Electrochemical Machining Technology, 2021, S. 93–99, Hrsg.: Reynaerts, D.; Saxena, K., ISBN: 978-9-08289-313-7

Žůrek, F.; Junge, T.; Nestler, A.; Schaller, S.; Schubert, A.: Dynamic properties of an air bearing drive system for manufacturing of twist-free surfaces by start-stop turning. In: Procedia CIRP, 2021, Band 104, S. 1464–1469, DOI: 10.1016/j.procir.2021.11.247

Schaarschmidt, I.; Loebel, S.; Steinert, P.; Zinecker, M.; Schubert, A.: Design of pulsed electrochemical machining processes based on data processing and multiphysics simulation. In: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), 2021, Band 10, S. 256–265, DOI: 10.1007/978-3-662-62138-7_26

Liborius, H.; Grund, T.; Nestler, A.; Paczkowski, G.; Schubert, A.; Lampke, T.: Influence of the finish-machining by turning and diamond smoothing on the tribological properties of Fe17Cr2Ni0.2C thermally sprayed coatings. In: Surface and Coatings Technology, 2021, Band 405, 126731, DOI: 10.1016/j.surfcoat.2020.126731

Loebel, S.; Zinecker, M.; Steinert, P.; Schubert, A.: Transient simulation of electrochemical machining processes for manufacturing of surface structures in high‐strength materials. In: Engineering Reports, 2021, Band 4(7-8), e12360, DOI: 10.1002/eng2.12360

Lindner, T.; Liborius, H.; Schubert, A.; Lampke, T.: Laser Cladding und mechanische Nachbearbeitung von CrFeCoNi und AlCrFeCoNi. Vortrag: 22. Werkstofftechnisches Kolloquium, Chemnitz, 24.03.2021

Börner, R.; Landgraf, P.; Kimme, S.; Titsch, C.; Lampke, T.; Schubert, A.: Fundamental Investigations in Tool Wear and Characteristics of Surface Microstructure for Ultrasonic Vibration Superimposed Machining of Heat-Treated X46Cr13 Steel Using Different Cutting Materials. In: Journal of Manufacturing and Materials Processing, 2021, Band 5(2), 27, DOI: 10.3390/jmmp5020027

Liborius, H.; Uhlig, T.; Clauß, B.; Nestler, A.; Lindner, T.; Schubert, A.; Wagner, G.; Lampke, T.: Influence of the cutting material on tool wear, surface roughness, and force components for different cutting speeds in face turning of CoCrFeNi high-entropy alloys. In: IOP Conference Series: Materials Science and Engineering, 2021, Band 1147(1), 012008, DOI: 10.1088/1757-899X/1147/1/012008

Berger, T.; Martin, A.; Navickaitė, K.; Schubert, A.: Influence of EDM generator programs on shape and surface roughness of Ni-Ti sheets. In: IOP Conference Series: Materials Science and Engineering, 2021, Band 1147(1), 012023, DOI: 10.1088/1757-899X/1147/1/012023

Mehner, T.; Junge, T.; Schubert, A.; Lampke, T.: Prediction of residual-stress depth profiles in turning of EN AW-2017 based on in-process measurements of machining forces and temperatures. In: IOP Conference Series: Materials Science and Engineering, 2021, Band 1147(1), 012019, DOI: 10.1088/1757-899X/1147/1/012019

Saborowski, E.; Steinert, P.; Dittes, A.; Lindner, T.; Schubert, A.; Lampke, T.: Suitability of roughness parameters for the interlaminar strength prediction of mechanically interlocked polymer-metal-interfaces. In: IOP Conference Series: Materials Science and Engineering, 2021, Band 1147(1), 012021, DOI: 10.1088/1757-899X/1147/1/012021

Liborius, H.; Nestler, A.; Löbel, M.; Lindner, T.; Uhlig, T.; Schubert, A.; Lampke, T.; Wagner, G.: Influence of the composition of thermally sprayed (Al)CoCrFeNi(Mo) high-entropy alloy coatings in face turning and diamond smoothing. In: Proceedings of the 21st international conference of the european society for precision engineering and nanotechnology, 2021, S. 347–350, Hrsg.: R. K. Leach; C. Nisbet; D. Phillips, ISBN: 978-0-9957751-9-0, URL: https://www.euspen.eu/knowledge-base/ICE21168.pdf

Quitzke, S.; Martin, A.; Schubert, A.; Lampke, T.: Influence of ignition and polishing phase on jet shape and electric current in Jet-Plasma electrolytic Polishing. In: Proceedings of the 21st international conference of the european society for precision engineering and nanotechnology, 2021, S. 165–168, Hrsg.: R. K. Leach; C. Nisbet; D. Phillips, ISBN: 978-0-9957751-9-0, URL: https://www.euspen.eu/knowledge-base/ICE21144.pdf

Kutschmann, P.; Lindner, T.; Liborius, H.; Grund, T.; Schubert, A.; Lampke, T.: Influence of Thermochemical Treatment on the Surface Properties of Finish Turned Wire Arc Sprayed 17Cr Steel Coatings. In: Applied Sciences, 2021, Band 11(14), 6520, DOI: 10.3390/app11146520

Maurer, O.; Liborius, H.; Rauch, C.; Bähre, D.; Schubert, A.: Influence of Cutting Speed in Turning and Force in Subsequent Diamond Smoothing on Magnetic Properties of Steel 100Cr6. In: Metals, 2021, Band 11(7), 1131, DOI: 10.3390/met11071131

Schubert, A.; Zinecker, M.; Martin, A.; Quitzke, S.; Danilov, I.; Kröning, O.; Safranchik, D.; Essel, S.; Zeidler, H.: Local surface nanoscale modification by Jet Plasma electrolytic Polishing. In: R&D report of the BMBF project Jet-PeP (Fkz: 02P17W010), 2021, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, DOI: 10.2314/KXP:1819763390

Clauß, B.; Schubert, A.: Milling of an Aluminium Matrix Composite Using MCD-Tipped Tools with Adjusted Corner and Minor Cutting Edge Geometries. In: Journal of Composites Science, 2021, Band 5(9), 235, DOI: 10.3390/jcs5090235

Junge, T.; Nestler, A.; Schubert, A.: In-process monitoring and empirical modeling of the tool wear in turning of aluminum alloys using thermoelectric signals. In: Procedia CIRP, 2021, Band 102, S. 308–313, DOI: 10.1016/j.procir.2021.09.053

Nestler, A.; Schubert, A.: Performance of Different Diamond Cutting Tools in Face Milling of Cemented Carbide. In: MM Science Journal – Special Issue on HSM2021, 2021, S. 5038–5045, DOI: 10.17973/mmsj.2021_11_2021150

2020

Berger, T.; Herzig, M.; Hackert-Oschätzchen, M.; Schulze, H.-P.; Martin, A.; Kröning, O.; Schubert, A.: Experimental Characterisation of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation. In: Procedia CIRP, 2020, Band 95, S. 505–510, DOI: 10.1016/j.procir.2020.02.299

Mwangi, J. W.; Bui, V. D.; Thüsing, K.; Hahn, S.; Wagner, M. F.-X.; Schubert, A.: Characterization of the arcing phenomenon in micro-EDM and its effect on key mechanical properties of medical-grade Nitinol. In: Journal of Materials Processing Technology, 2020, Band 275, 116334, DOI: 10.1016/j.jmatprotec.2019.116334

Grund, T.; Paczkowski, G.; Lampke, T.; Liborius, H.; Nestler, A.; Schubert, A.: Finish Turning of FeCr17Ni2C0.2 Iron-based Sprayed Coatings: Influences of Substrate Preparation, Cutting Speed and Feed on the Coating and Surface Properties. In: Journal of Thermal Spray Technology, 2020, Band 29(1-2), S. 308–318, DOI: 10.1007/s11666-019-00930-9

Bui, V. D.; Mwangi, J. W.; Meinshausen, A.-K.; Müller, A. J.; Bertrand, J.; Schubert, A.: Antibacterial coating of Ti-6Al-4V surfaces using silver nano-powder mixed electrical discharge machining. In: Surface and Coatings Technology, 2020, Band 383, 125254, DOI: 10.1016/j.surfcoat.2019.125254

Funke, R.; Börner, R.; Schubert, A.: Geometrische Oberflächencharakterisierung von durch spanende Verfahren hergestellten Mikrostrukturen. In: Sächsisches Geometriesymposium 2020, 2020, S. 143–153, Hrsg.: Gröger, S.; Weißgerber, M., ISBN: 978-3-96100-109-5, URL: https://nbn-resolving.org/urn:nbn:de:bsz:ch1-qucosa2-367750

Berger, T.; Parczyk, P.; Gläser, M.; Martin, A.; Schröder, M.; Schubert, A.; Scharff, W.: Design of a Machine-integrated Optical Measuring System for Electrode Positioning for Electro-Thermal Precision Ablation. In: Procedia Manufacturing, 2020, Band 47, S. 737–742, DOI: 10.1016/j.promfg.2020.04.226

Saborowski, E.; Steinert, P.; Dittes, A.; Lindner, T.; Schubert, A.; Lampke, T.: Introducing Fractal Dimension for Interlaminar Shear and Tensile Strength Assessment of Mechanically Interlocked Polymer–Metal Interfaces. In: Materials, 2020, Band 13(9), 2171, DOI: 10.3390/ma13092171

Schaarschmidt, I.; Steinert, P.; Hackert-Oschätzchen, M.; Meichsner, G.; Schubert, A.; Jungblut, G.: Experimental Study on Micro Forming of Structured Surfaces for High Static Friction Connection Elements. In: Procedia Manufacturing, 2020, Band 47, S. 1230–1234, DOI: 10.1016/j.promfg.2020.04.188

Clauß, B.; Liborius, H.; Lindner, T.; Löbel, M.; Schubert, A.; Lampke, T.: Influence of the cutting parameters on the surface properties in turning of a thermally sprayed AlCoCrFeNiTi coating. In: Procedia CIRP, 2020, Band 87, S. 19–24, DOI: 10.1016/j.procir.2020.02.015

Junge, T.; Liborius, H.; Mehner, T.; Nestler, A.; Schubert, A.; Lampke, T.: Method for process monitoring of surface layer changes in turning of aluminium alloys using tools with a flank face chamfer. In: Procedia CIRP, 2020, Band 87, S. 432–437, DOI: 10.1016/j.procir.2020.02.090

Börner, R.; Göltz, M.; Helmreich, T.; Schubert, A.; Rosiwal, S.: Surface Microstructuring of Steel Components for CVD Diamond Coating by Ultrasonic Vibration Superimposed Face Milling using Tailored Tools. In: Procedia CIRP, 2020, Band 87, S. 234–239, DOI: 10.1016/j.procir.2020.02.020

Prieske, M.; Börner, R.; Berger, T.; Kühn, R.; Scholz, P.; Schubert, A.; Müller, R.; Vollertsen, F.: Dry deep drawing of aluminum for automotive production. In: Dry Met. Forming OAJ FPR 6, 2020, S. 262–301, DOI: 10.26092/elib/160

Clauß, B.; Schaller, S.; Schubert, A.: Investigations of non-circular turning using a high-acceleration drive unit based on aerostatic bearing principle. In: Proc. euspen’s 20th International Conference & Exhibition, 2020, S. 385–388, ISBN: 978-0-9957751-7-6, URL: https://www.euspen.eu/knowledge-base/ICE20129.pdf

Quitzke, S.; Martin, A.; Schubert, A.: Localized surface functionalization of steel by jet-plasma electrolytic polishing. In: Proc. euspen’s 20th International Conference & Exhibition, 2020, S. 133–136, ISBN: 978-0-9957751-7-6, URL: https://www.euspen.eu/knowledge-base/ICE20356.pdf

Clauß, B.; Meinecke, C. R.; Günther, W.; Akthari, S.; Albers, J.; Forke, R.; Streit, P.; Reuter, D.; Schubert, A.: Process monitoring and impulse detection in face milling using capacitive acceleration sensors based on MEMS. In: Procedia CIRP, 2020, Band 93, S. 1454–1459, DOI: 10.1016/j.procir.2020.03.037

Junge, T.; Liborius, H.; Mehner, T.; Nestler, A.; Schubert, A.; Lampke, T.: Measurement system based on the Seebeck effect for the determination of temperature and tool wear during turning of aluminum alloys. In: Procedia CIRP, 2020, Band 93, S. 1435–1441, DOI: 10.1016/j.procir.2020.03.015

Junge, T.; Nestler, A.; Schubert, A.: Application Potential of Thermoelectric Signals for Temperature Monitoring in Turning of Aluminum Alloys. In: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), 2020, S. 235–245, DOI: 10.1007/978-3-662-62138-7_24

Aragaw, E. M.; Gärtner, E.; Schubert, A.: Combined laser hardening and laser surface texturing forming tool 1.2379. In: Procedia CIRP, 2020, Band 94, S. 914–918, DOI: 10.1016/j.procir.2020.09.072

Loebel, S.: Transiente Simulation von elektrochemischen Bearbeitungsprozessen zur Herstellung von Oberflächenstrukturen in hochfesten Werkstoffen. Vortrag: AMARETO-Abschlusskolloquium, Freiberg, 01.10.2020, URL: https://amareto.info/downloads/abschluss_kolloquium/Oberflaeche_01_Loebel.pdf

Martin, A.: Surface Structuring of SiSiC by Jet-Electrochemical Machining. Vortrag: euspen Virtual Special Interest Group Meeting: Structured & Freeform Surfaces, online, 08.10.2020, URL: https://www.euspen.eu/knowledge-base/SFS20102.pdf

Funke, R.: Surface microstructuring of journal bearings by ultrasonic vibration-assisted turning. Vortrag: euspen Virtual Special Interest Group Meeting: Structured & Freeform Surfaces, online, 08.10.2020, URL: https://www.euspen.eu/knowledge-base/SFS20115.pdf

Penzel, M.; Steinert, P.; Zinecker, M.; Berger, A.; Schubert, A.: Flow field analysis of fuel cells to determine temperature distribution and heat dissipation. In: Proceedings of the European COMSOL Conference, 2020, URL: https://www.comsol.com/paper/95031

Navickaitė, K.; Penzel, M.; Bahl, C.; Engelbrecht, K.; Tušek, J.; Martin, A.; Zinecker, M.; Schubert, A.: CFD-Simulation Assisted Design of Elastocaloric Regenerator Geometry. In: Sustainability, 2020, Band 12(21), 9013, DOI: 10.3390/su12219013

Schoesau, R.; Böttcher, F.; Petzold, T.; Rentzsch, H.; Edelmann, J.: New Potentials for Precise ECM Achieved by Orbiting-Kinematics. In: Proceedings of the 16th International Symposium on Electrochemical Machining Technology, 2020, S. 49–55, Hrsg.: Schubert, A.; Zinecker, M., ISBN: 978-3-95735-125-8

Yahyavi Zanjani, M.; Martin, A.; Zinecker, M.; Schubert, A.: Statistical Analysis of Jet Electrochemical Post-Processing of Additively Manufactured Workpieces. In: Proceedings of the 16th International Symposium on Electrochemical Machining Technology, 2020, S. 77–84, Hrsg.: Schubert, A.; Zinecker, M., ISBN: 978-3-95735-125-8

Schröder, S.; Petzold, T.; Martin, A.; Schubert, A.: Pulsed Electrochemical Machining of 1.2709 Additive Manufactured Steel. In: Proceedings of the 16th International Symposium on Electrochemical Machining Technology, 2020, S. 85–92, Hrsg.: Schubert, A.; Zinecker, M., ISBN: 978-3-95735-125-8

Loebel, S.; Petzold, T.; Steinert, P.; Zinecker, M.; Schubert, A.: Order Reduction of Simulation Models for the Precise Electrochemical Machining of Centrifugal Impellers. In: Proceedings of the 16th International Symposium on Electrochemical Machining Technology, 2020, S. 117–122, Hrsg.: Schubert, A.; Zinecker, M., ISBN: 978-3-95735-125-8

Schneider, J.; Petzold, T.; Uhlmann, M.; Boehm, A.; Edelmann, J.; Martin, A.; Schubert, A.: Precise Processing of Multiple Actuator Elements by Pulsed Electrochemical Machining. In: Proceedings of the 16th International Symposium on Electrochemical Machining Technology, 2020, S. 131–137, Hrsg.: Schubert, A.; Zinecker, M., ISBN: 978-3-95735-125-8

Schaarschmidt, I.; Steinert, P.; Zinecker, M.; Schubert, A.: Process Design for the Precise Electrochemical Machining of Internal Blind Hole Gears. In: Proceedings of the 16th International Symposium on Electrochemical Machining Technology, 2020, S. 149–155, Hrsg.: Schubert, A.; Zinecker, M., ISBN: 978-3-95735-125-8

Quitzke, S.; Martin, A.; Schubert, A.: Correlation between Current Density and Ablation Rate of Jet-PeP. In: Proceedings of the 16th International Symposium on Electrochemical Machining Technology, 2020, S. 181–188, Hrsg.: Schubert, A.; Zinecker, M., ISBN: 978-3-95735-125-8

Junge, T.; Mehner, T.; Nestler, A.; Schubert, A.; Lampke, T.: Metrological characterization of the thermomechanical influence of the cross-section of the undeformed chip on the surface properties in turning of the aluminum alloy EN AW-2017. In: tm - Technisches Messen, 2020, Band 87(12), S. 777–786, DOI: 10.1515/teme-2020-0059

Clauß, B.; Schaller, S.; Schubert, A.: Unrunddrehen mit luftgelagertem Linearantrieb. In: wt Werkstattstechnik online, 2020, Band 110(11-12), S. 748–751, DOI: 10.37544/1436-4980-2020-11-12-12

Bui, V. D.; Boehme, V.; Mwangi, J. W.; Berger, T.; Schubert, A.: Investigation of Ultrasonic Vibration Assisted Powder Mixed Electrical Discharge Machining for Antibacterial Coating on Implant Surfaces. In: Procedia CIRP, 2020, Band 95, S. 431–436, DOI: 10.1016/j.procir.2020.01.159

Danilov, I.; Paul, R.; Hackert-Oschätzchen, M.; Zinecker, M.; Quitzke, S.; Schubert, A.: Random Sequential Simulation of the Resulting Surface Roughness in Plasma Electrolytic Polishing of Stainless Steel. In: Procedia CIRP, 2020, Band 95, S. 981–986, DOI: 10.1016/j.procir.2020.02.255

Schaarschmidt, I.; Hackert-Oschätzchen, M.; Meichsner, G.; Steinert, P.; Zinecker, M.; Schubert, A.: Working Gap Analysis in Electrochemical Precision Machining of External Geometries with Ring Cathodes. In: Procedia CIRP, 2020, Band 95, S. 662–667, DOI: 10.1016/j.procir.2020.02.279

2019

Schulze, R.; Lämmel, J.; Kröning, O.; Schulze, H.-P.; Herzig, M.; Scharff, W.; Schiller, J.; Marke, S.; Geithe, R.; Grötzschel, R.; Ehrlich, S.; Reißig, S.; Hackert-Oschätzchen, M.; Martin, A.; Petzold, T.; Schubert, A.: Ressourceneffiziente Endbearbeitung durch elektrochemisches Abtragen mit prozesszustandsabhängiger Kathodenbestromung – SwitchECM . In: Projektband der BMBF-Förderinitiative Innovative Elektrochemie mit neuen Materialien – InnoEMat, 2019, S. 48–52, URL: https://www.dgo-online.de/fileadmin/dgo/DGO-Redaktion/Forschung_InnoEMat_Projekt/Projektband_InnoEMat.pdf

Grund, T.; Liborius, H.; Paczkowski, G.; Nestler, A.; Lampke, T.; Schubert, A.: Influence of the finish-machining by turning and diamond smoothing on the tribological properties of Fe17Cr2Ni0.2C thermally sprayed coatings. Vortrag: 9 RIPT Conference: Les Rencontres Internationales de la Projection Thermique, Jülich, 11.–13.12.2019

Mwangi, J. W.; Nguyen, L. T.; Bui, V. D.; Berger, T.; Zeidler, H.; Schubert, A.: Nitinol manufacturing and micromachining: A review of processes and their suitability in processing medical-grade nitinol. In: Journal of Manufacturing Processes, 2019, Band 38, S. 355–369, DOI: 10.1016/j.jmapro.2019.01.003

Liborius, H.; Paczkowski, G.; Nestler, A.; Grund, T.; Mehner, T.; Schubert, A.; Lampke, T.: Influence of cutting speed on the surface properties in turning of Fe17Cr2Ni0.2C iron based thermally sprayed coatings. In: International Conference on Competitive Manufacturing (COMA 19) Proceedings, 2019, S. 317–323, ISBN: 978-0-7972-1779-9

Petzold, T.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A.: Simulation-based Design of an Electrolyte System for Electrochemical Machining with Differentially Switched Currents. In: International Conference on Competitive Manufacturing (COMA 19) Proceedings, 2019, S. 63–67, ISBN: 978-0-7972-1779-9

Danilov, I.; Hackert-Oschätzchen, M.; Zinecker, M.; Meichsner, G.; Edelmann, J.; Schubert, A.: Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology. In: Micromachines, 2019, Band 10(3), 214, DOI: 10.3390/mi10030214

Yahyavi Zanjani, M.; Hackert-Oschätzchen, M.; Martin, A.; Meichsner, G.; Edelmann, J.; Schubert, A.: Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density. In: Micromachines, 2019, Band 10(4), 261, DOI: 10.3390/mi10040261

Grund, T.; Paczkowski, G.; Lampke, T.; Liborius, H.; Nestler, A.; Schubert, A.: Finish turning of FeCr17Ni2C0.2 iron based sprayed coatings - influences of substrate preparation and cutting speed on the coating and surface properties. In: ITSC 2019 – Proceedings of the International Thermal Spray Conference, 2019, S. 761–767

Lampke, T.; Lang, H.; Schubert, A.; Wagner, G.; Hausner, S.; Jahn, S. F.; Jakob, A.; Frenzel, P.; Noll, J.; Schimmelpfennig, R.: Ultraschallunterstütztes Fügen. In: Technologiefusion für multifunktionale Leichtbaustrukturen, 2019, S. 566–573, Hrsg.: Kroll, L., Springer Vieweg Berlin, ISBN: 978-3-662-54733-5

Bui, V. D.; Mwangi, J. W.; Schubert, A.: Powder mixed electrical discharge machining for antibacterial coating on titanium implant surfaces. In: Journal of Manufacturing Processes, 2019, Band 44, S. 261–270, DOI: 10.1016/j.jmapro.2019.05.032

Mwangi, J. W.: Micro-Electrical Discharge Machining of Nitinol for medical applications (Dissertation). In: Scripts Precision and Microproduction Engineering, 2019, Band 13, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-95735-107-4

Hackert-Oschätzchen, M.; Paul, R.; Schubert, A.: Multiphysics Simulation of Oxide Layer Growth in Localized Anodization of Aluminum Applying a Free-Surface Electrolyte Jet. In: Procedia CIRP, 2019, Band 82, S. 243–248, DOI: 10.1016/j.procir.2019.04.035

Paul, R.; Hackert-Oschätzchen, M.; Danilov, I.; Yahyavi Zanjani, M.; Schubert, A.: 3D Multiphysics Simulation of Jet Electrochemical Machining of Intersecting Line Removals. In: Procedia CIRP, 2019, Band 82, S. 196–201, DOI: 10.1016/j.procir.2019.04.154

Schaarschmidt, I.; Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Schubert, A.: Implementation of the Machine Tool-Specific Current and Voltage Control Characteristics in Multiphysics Simulation of Electrochemical Precision Machining. In: Procedia CIRP, 2019, Band 82, S. 237–242, DOI: 10.1016/j.procir.2019.04.142

Clauß, B.; Nestler, A.; Schubert, A.; Dietrich, D.; Lampke, T.: Influencing the Properties of the Generated Surface by Adjusted Rake and Clearance Angles in Side Milling of Aluminum Matrix Composites with MCD-Tipped Tools. In: Journal of Manufacturing and Materials Processing, 2019, Band 3(3), 59, DOI: 10.3390/jmmp3030059

Morgenstern, R.; Martin, A.; Lehnert, N.; Scharf, I.; Hackert-Oschätzchen, M.; Schubert, A.; Lampke, T.: Localized anodization of the aluminum alloy EN AW-7075 T6 by closed electrolytic free jet. In: IOP Conference Series: Materials Science and Engineering, 2019, Band 480, 012015, DOI: 10.1088/1757-899X/480/1/012015

Schubert, A.; Martin, A.; Yahyavi Zanjani, M.; Hackert-Oschätzchen, M.: ECM with closed electrolytic free jet. In: microPRODUCTION, 2019, Band 19(01), S. 44–49, ISSN: 1614-4538

Tosello, G.; Gülçür, M.; Whiteside, B.; Coates, P.; Luca, A.; Vinícius de Sousa Lia Fook, P.; Riemer, O.; Danilov, I.; Yahyavi Zanjani, M.; Hackert-Oschätzchen, M.; Schubert, A.; Baruffi, F.; Achour, S. B.; Calaon, M.; Nielsen, C. V.; Bissacco, G.; Cannella, E.; Rasmussen, A. A.; Bellotti, M.; Saxena, K. K.; Qian, J.; Reynaerts, D.; Santoso, T.; Kuriakose, S.; Parenti, P.; Annoni, M.; Cai, Y.; Luo, X.; Qin, Y.; Zeidler, H.; Syam, W. P.; Leach, R. K.: Micro product and process fingerprints for zero-defect net-shape micromanufacturing. In: Proc. euspen's 19th International Conference & Exhibition, 2019, ISBN: 978-0-9957751-4-5, URL: https://nottingham-repository.worktribe.com/output/2294703

Clauß, B.; Nestler, A.; Schubert, A.; Dietrich, D.; Lampke, T.: Investigation of surface properties in turn milling of particle-reinforced aluminium matrix composites using MCD-tipped tools. In: The International Journal of Advanced Manufacturing Technology, 2019, Band 105(1-4), S. 937–950, DOI: 10.1007/s00170-019-04173-4

Saborowski, E.; Dittes, A.; Steinert, P.; Lindner, T.; Scharf, I.; Schubert, A.; Lampke, T.: Effect of Metal Surface Topography on the Interlaminar Shear and Tensile Strength of Aluminum/Polyamide 6 Polymer-Metal-Hybrids. In: Materials, 2019, Band 12(18), 2963, DOI: 10.3390/ma12182963

Börner, R.; Penzel, M.; Junge, T.; Schubert, A.: Design of Deterministic Microstructures as Substrate Pre-Treatment for CVD Diamond Coating. In: Surfaces, 2019, Band 2(3), S. 497–519, DOI: 10.3390/surfaces2030037

Liborius, H.; Nestler, A.; Paczkowski, G.; Grund, T.; Schubert, A.; Lampke, T.: Machining of Fe17Cr2Ni0.2C iron based thermally sprayed coatings by turning with special interest to the influence of the depth of cut. In: Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, S. 100–103, ISBN: 978-0-9957751-5-2, URL: https://www.euspen.eu/knowledge-base/AM19124.pdf

Mehner, T.; Liborius, H.; Scharf, I.; Nestler, A.; Schubert, A.; Lampke, T.: Charakterisierung der Korngröße einer durch spanende Bearbeitung modifizierten Randschicht mittels elektrischer Widerstandsmessung. In: Programm zur Werkstoffwoche 2019, 2019

Kimme, S.; Hafez, N.; Titsch, C.; Werner, J. M.; Nestler, A.; Drossel, W.-G.: Close-to-process strain measurement in ultrasonic vibration-assisted turning. In: Journal of Sensors and Sensor Systems, 2019, Band 8(2), S. 285–292, DOI: 10.5194/jsss-8-285-2019

Penzel, M.; Müller, F.; Sui, M.; Zinecker, M.; Schubert, A.; Wuttke, O.; Gläser, M.: Simulation of IR-heating and IR-scanning for the prediction of internal structures of walls. In: Proceedings of the European COMSOL Conference, 2019, URL: https://www.comsol.de/paper/82491

Penzel, M.; Börner, R.; Müller, F.; Zinecker, M.; Schubert, A.: Simulation of cooling induced residual stress distribution in diamond layers on steel. In: Proceedings of the European COMSOL Conference, 2019, URL: https://www.comsol.de/paper/82891

Liborius, H.; Nestler, A.; Paczkowski, G.; Schubert, A.; Grund, T.; Lampke, T.: Surface Integrity in Turning of Fe17Cr2Ni0.2C Iron Based Thermally Sprayed Coatings with Special Respect to the Influence of the Feed. In: Proceedings of the 15th International Conference on High Speed machining, 2019, ISBN: 978-80-904077-9-4

Meinecke, C. R.; Clauß, B.; Albers, J.; Höller, H.; Streit, P.; Forke, R.; Weidlich, S.; Dittrich, C.; Stritzke, B.; Schubert, A.; Hiller, K.; Reuter, D.: Development of a multi-sensor system for condition monitoring and crash detection of machine tools with rotating spindles. In: Proceedings of MikroSystemTechnik Kongress, 2019, S. 639–643, ISBN: 978-3-8007-5090-0

Liborius, H.; Nestler, A.; Paczkowski, G.; Schubert, A.; Grund, T.; Lampke, T.: Surface Integrity in Turning of Fe17Cr2Ni0.2C Iron Based Thermally Sprayed Coatings with Special Respect to the Influence of the Feed. In: MM Science Journal, 2019, Band 2019(04), S. 3220–3227, DOI: 10.17973/MMSJ.2019_11_2019074

Clauß, B.; Nestler, A.; Mehner, T.; Schubert, A.; Lampke, T.: Influence of SiC particle volume fraction and texture on the surface properties in milling of AMCs with MCD-tipped tools. In: Procedia CIRP, 2019, Band 85, S. 90–95, DOI: 10.1016/j.procir.2019.09.046

Schröder, S.; Martin, A.; Kahle, V.; Hackert-Oschätzchen, M.; Schubert, A.: Removal rate and surface roughness in plasma-electrolytic polishing of 1.4441 stainless steel. In: Proceedings of the 15th International Symposium on ElectroChemical Machining Technology, 2019, S. 140–146, Hrsg.: Bähre, D.; Ernst, A., ISBN: 978-3-00-064086-5

Loebel, S.; Hackert-Oschätzchen, M.; Meichsner, G.; Petzold, T.; Zinecker, M.; Schubert, A.: Modelling of Precise Electrochemical Machining for Nickel-based Centrifugal Impellers. In: Proceedings of the 15th International Symposium on ElectroChemical Machining Technology, 2019, S. 193–202, Hrsg.: Bähre, D.; Ernst, A., ISBN: 978-3-00-064086-5

Quitzke, S.; Martin, A.; Hackert-Oschätzchen, M.; Zeidler, H.; Schubert, A.: Process Design for Jet Plasma electrolytic Polishing of Stainless Steel. In: Proceedings of the 15th International Symposium on ElectroChemical Machining Technology, 2019, S. 125–132, Hrsg.: Bähre, D.; Ernst, A., ISBN: 978-3-00-064086-5

Petzold, T.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A.: Deburring and Edge Shaping by Electrochemical Machining with Differentially Switched Currents. In: Proceedings of the 15th International Symposium on ElectroChemical Machining Technology, 2019, S. 172–179, Hrsg.: Bähre, D.; Ernst, A., ISBN: 978-3-00-064086-5, URL: https://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa2-725197

2018

Steinert, P.; Nestler, A.; Schubert, A.: Erzeugung von Funktionsoberflächen für tribologische Anwendungen durch hocheffiziente Drehprozesse mit überlagerter Zusatzbewegung. Vortrag: 7. Fachtagung Entgrattechnologien und Präzisionsoberflächen, Lüdenscheid, 22.–23.11.2018

Nestler, A.; Steinert, P.; Schubert, A.: Erzeugung von Funktionsoberflächen für tribologische Anwendungen durch hocheffiziente Drehprozesse mit überlagerter Zusatzbewegung. Vortrag: 6. Fachtagung Entgrattechnologien und Präzisionsoberflächen, Nürtingen, 03.–04.05.2018

Schubert, A.; Berger, T.; Martin, A.; Hackert-Oschätzchen, M.; Treffkorn, N.; Kühn, R.: Surface structuring of boron doped CVD diamond by micro electrical discharge machining. In: AIP Conference Proceedings, 2018, Band 1960(1), 080003, DOI: 10.1063/1.5034926

Bui, V. D.; Mwangi, J. W.; Schubert, A.: Effect of tool electrode size and pulse energy on surface integrity of titanium implant in electrical discharge milling. In: Proc. 2nd Medical Device Manufacturing International Conference & Exhibition, 2018

Bui, V. D.; Mwangi, J. W.; Schubert, A.: Investigating the potential of electrical discharge machining for antibacterial coating of titanium implants. In: Proc. euspens 18th International Conference & Exhibition, 2018, ISBN: 978-0-9957751-2-1, URL: https://www.euspen.eu/knowledge-base/ICE18255.pdf

Mwangi, J. W.; Bui, V. D.; Berger, T.; Zeidler, H.; Schubert, A.: RC-generator circuit pulse analysis for micro-EDM of high aspect ratio nitinol bores. In: Proc. euspen's 18th International Conference & Exhibition, 2018, ISBN: 978-0-9957751-2-1, URL: https://www.euspen.eu/knowledge-base/ICE18181.pdf

Liborius, H.; Paczkowski, G.; Nestler, A.; Grund, T.; Schubert, A.; Lampke, T.: Influence of dovetail microstructures on adhesive tensile strength and morphology of thermally sprayed metal coatings. In: Procedia CIRP, 2018, Band 71, S. 299–304, DOI: 10.1016/j.procir.2018.05.024

Schubert, A.; Zinecker, M.; Steinert, P.; Funke, R.; Schmidt, T.; Edelmann, J.: Gestaltung und Fertigung funktionsbestimmender Oberflächen von Bauteilen. In: Präzision durch Adaptive Produktion. 10. Chemnitzer Produktionstechnisches Kolloquium, 2018, S. 123–136

Steinert, P.; Dittes, A.; Schimmelpfennig, R.; Scharf, I.; Lampke, T.; Schubert, A.: Design of high strength polymer metal interfaces by laser microstructured surfaces. In: IOP Conference Series: Materials Science and Engineering, 2018, Band 373, 012015, DOI: 10.1088/1757-899X/373/1/012015

Lehnert, N.; Martin, A.; Mwangi, J. W.; Hackert-Oschätzchen, M.; Schubert, A.; Morgenstern, R.; Lampke, T.: Multiphysics Simulation of Localised Anodisation of Aluminium. In: Proc. euspen's 18th International Conference & Exhibition, 2018, ISBN: 978-0-9957751-2-1, URL: https://www.euspen.eu/knowledge-base/ICE18325.pdf

Meichsner, G.: Entwicklung und Realisierung einer Methode zur Bestimmung von Prozesseingangsgrößen für das elektrochemische Präzisionsabtragen (Dissertation). In: Scripts Precision and Microproduction Engineering, 2018, Band 12, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-95735-087-9

Prieske, M.; Börner, R.; Schubert, A.: Influence of the surface microstructure on the adhesion of a CVD-diamond coating on steel with a CrN interlayer. In: MATEC Web of Conferences, 2018, Band 190, 14008, DOI: 10.1051/matecconf/201819014008

Müller, B.; Schubert, A.: Generation of micro channels in AlMg4.5Mn0.7 sheets using a vibration-assisted micro forming process. In: MATEC Web of Conferences, 2018, Band 190, 10003, DOI: 10.1051/matecconf/201819010003

Funke, R.; Schubert, A.: Effects of process parameters during turn-milling of microstructured surfaces on the coefficient of static friction. In: Procedia CIRP, 2018, Band 77, S. 255–258, DOI: 10.1016/j.procir.2018.09.009

Schubert, A.; Koriath, H.-J.; Wittstock, V.; Peter, S.; Müller, B.; Pierer, A.; Schmidt, M.: High Volume Production of PZT Fiber Arrays for Direct Functional Integration into Metal Structures. In: Advanced Engineering Materials, 2018, Band 20(12), 1800410, DOI: 10.1002/adem.201800410

Schubert, A.; Koriath, H.-J.; Wittstock, V.; Müller, B.; Pierer, A.; Schmidt, M.: Advanced Micro Structuring and Joining Technologies for Direct Integration of Piezo Fibers into Metallic Materials. In: Advanced Engineering Materials, 2018, Band 20(12), 1800472, DOI: 10.1002/adem.201800472

Mwangi, J. W.; Weisheit, L.; Bui, V. D.; Yahyavi Zanjani, M.; Schubert, A.: Influence of Micro-EDM on the Phase Transformation Behaviour of Medical-Grade Nitinol. In: Shape Memory and Superelasticity, 2018, Band 4(4), S. 450–461, DOI: 10.1007/s40830-018-00195-1

Loebel, S.; Hackert-Oschätzchen, M.; Paul, R.; Meichsner, G.; Schubert, A.: Simulationsbasierte Gestaltung von elektrochemischen Abtragprozessen für hochfeste Materialien. In: Tagungsband 1. AMARETO-Kolloquium 2018 – Vom Werkstoff zum ressourcenschonenden Produkt, 2018, S. 69–72, ISBN: 978-3-95735-091-6

Danilov, I.; Hackert-Oschätzchen, M.; Schaarschmidt, I.; Zinecker, M.; Schubert, A.: Transient Simulation of the Removal Process in Plasma Electrolytic Polishing of Stainless Steel. In: Proceedings of the European COMSOL Conference, 2018, URL: https://www.comsol.com/paper/63401

Schaarschmidt, I.; Steinert, P.; Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Schubert, A.: Simulation-based Analysis of a Microstructuring Process for Serrated Surfaces with Higher Friction. In: Proceedings of the European COMSOL Conference, 2018, URL: https://www.comsol.com/paper/64471

Penzel, M.; Schaarschmidt, I.; Hackert-Oschätzchen, M.; Schubert, A.: Numerical Investigation of Electrolyte Flow in a Multi-cathode System for Electrochemical Machining. In: Proceedings of the European COMSOL Conference, 2018, URL: https://www.comsol.com/paper/64471

Loebel, S.; Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Schubert, A.: Simulation-based Design of Electrochemical Machining Processes for Microstructuring of High-strength Materials. In: Proceedings of the 14th International Symposium on ElectroChemical Machining Technology, 2018, S. 145–156, Hrsg.: Bergs, T.; Herrig, T.; Harst, S.; Klink, A., ISBN: 978-3-86359-667-5

Martin, A.; Petzold, T.; Hackert-Oschätzchen, M.; Meichsner, G.; Schubert, A.: Experimental Derivation of Process Input Parameters for Electrochemical Machining with Differentially Switched Currents. In: Proceedings of the 14th International Symposium on ElectroChemical Machining Technology, 2018, S. 115–122, Hrsg.: Bergs, T.; Herrig, T.; Harst, S.; Klink, A., ISBN: 978-3-86359-667-5

Meichsner, G.; Hackert-Oschätzchen, M.; Loebel, S.; Boenig, L.; Schubert, A.; Putz, M.: Characterization of the Lateral Working Distance in Precise Electrochemical Machining of Differently Heat Treated Steel. In: Proceedings of the 14th International Symposium on ElectroChemical Machining Technology, 2018, S. 93–108, Hrsg.: Bergs, T.; Herrig, T.; Harst, S.; Klink, A., ISBN: 978-3-86359-667-5

Quitzke, S.; Kröning, O.; Martin, A.; Hackert-Oschätzchen, M.; Schulze, H.-P.; Kranhold, C.; Zeidler, H.; Schubert, A.: Design of a Test Rig for Local Surface Modification by Jet Plasma Electrolytic Polishing. In: Proceedings of the 14th International Symposium on ElectroChemical Machining Technology, 2018, S. 63–72, Hrsg.: Bergs, T.; Herrig, T.; Harst, S.; Klink, A., ISBN: 978-3-86359-667-5

Schubert, A.; Martin, A.; Yahyavi Zanjani, M.; Hackert-Oschätzchen, M.: Elektrochemisches Abtragen im Freistrahl. In: Mikroproduktion, 2018, Band 18(06), S. 34–39, ISSN: 1614-4538, URL: http://www.mikroproduktion.com/uploads/media/34-39-Mikroproduktion_6_18_TU_Chemnitz-online_02.pdf

Nestler, A.; Schubert, A.: Roller Burnishing of Particle Reinforced Aluminium Matrix Composites. In: Metals, 2018, Band 8(2), 95, DOI: 10.3390/met8020095

Börner, R.; Winkler, S.; Junge, T.; Titsch, C.; Schubert, A.; Drossel, W.-G.: Generation of functional surfaces by using a simulation tool for surface prediction and micro structuring of cold-working steel with ultrasonic vibration assisted face milling. In: Journal of Materials Processing Technology, 2018, Band 255, S. 749–759, DOI: 10.1016/j.jmatprotec.2018.01.027

Steinert, P.; Dittes, A.; Schimmelpfennig, R.; Scharf, I.; Lampke, T.; Schubert, A.: Design of high strength polymer metal interfaces by laser microstructured surfaces. In: Tagungsband zum 20. Werkstofftechnischen Kolloquium, 2018, S. 357–365, ISSN: 1439-1597

Clauß, B.; Nestler, A.; Schubert, A.: Influencing the properties of the generated surface by modified cutting edge geometries in side milling of aluminium matrix composites (AMCs) with MCD tipped tools. In: Proc. 14th International Conference on High Speed Machining, 2018

Lehnert, N.; Meichsner, G.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A.: Study on the Influence of the Processing Speed in the Generation of Complex Geometries in Aluminium Matrix Composites by Electrochemical Precision Machining. In: Procedia CIRP, 2018, Band 68, S. 713–718, DOI: 10.1016/j.procir.2017.12.143

Lehnert, N.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A.: Derivation of Guidelines for Reliable Finishing of Aluminium Matrix Composites by Jet Electrochemical Machining. In: Procedia CIRP, 2018, Band 68, S. 471–476, DOI: 10.1016/j.procir.2017.12.086

Martin, A.; Hackert-Oschätzchen, M.; Lehnert, N.; Schubert, A.: Analysis of the fundamental removal geometry in electrochemical profile turning with continuous electrolytic free jet. In: Procedia CIRP, 2018, Band 68, S. 466–470, DOI: 10.1016/j.procir.2017.12.085

Berger, T.; Schulze, H.-P.; Hackert-Oschätzchen, M.; Herzig, M.; Kröning, O.; Schubert, A.: Design of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation. In: Procedia CIRP, 2018, Band 68, S. 678–683, DOI: 10.1016/j.procir.2017.12.153

2017

Schimmelpfennig, R.; Schubert, A.; Nestler, A.: Erhöhung der Zugscherfestigkeit von Hybridverbindungen durch Ultraschallfügen unter Nutzung mikrostrukturierter metallischer Fügepartner. In: Programm zur Werkstoffwoche 2017, 2017

Müller, B.; Pierer, A.; Schmidt, M.; Schubert, A.; Koriath, H.-J.; Putz, M.; Wittstock, V.: In-Process Monitoring of Joining Operations for Piezoceramic Elements. In: Key Engineering Materials, 2017, Band 742, S. 800–806, DOI: 10.4028/www.scientific.net/KEM.742.800

Penzel, M.; Zinecker, M.; Schubert, A.; Hackert-Oschätzchen, M.: Investigation of forced convection in pin structured cold plates for improved heat transfer and heat spreading. In: Proc. of 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2017

Schaarschmidt, I.; Zinecker, M.; Hackert-Oschätzchen, M.; Meichsner, G.; Schubert, A.: Multiscale Multiphysics Simulation of a Pulsed Electrochemical Machining Process with Oscillating Cathode for Microstructuring of Impact Extrusion Punches. In: Procedia CIRP, 2017, Band 58, S. 257–262, DOI: 10.1016/j.procir.2017.04.005

Hackert-Oschätzchen, M.; Paul, R.; Kowalick, M.; Kuhn, D.; Meichsner, G.; Zinecker, M.; Schubert, A.: Characterization of an Electrochemical Machining Process for Precise Internal Geometries by Multiphysics Simulation. In: Procedia CIRP, 2017, Band 58, S. 175–180, DOI: 10.1016/j.procir.2017.04.021

Schubert, A.: Functionalization of metallic parts by machining operations. Vortrag: Printing Future Days 2017, Chemnitz, 05.10.2017

Martin, A.: Generation of surface properties and 3D-microstructures by Electrochemical Machining. Vortrag: Printing Future Days 2017, Chemnitz, 05.10.2017

Steinert, P.; Schaarschmidt, I.; Paul, R.; Zinecker, M.; Hackert-Oschätzchen, M.; Muschalek, T.; Esslinger, J.; Schubert, A.: Analysis of Mixing Chambers for the Processing of Two-Component Adhesives for Transport Applications. In: Proceedings of the European COMSOL Conference, 2017, URL: https://www.comsol.com/paper/52081

Schaarschmidt, I.; Meichsner, G.; Zinecker, M.; Hackert-Oschätzchen, M.; Schubert, A.: Multiscale model of the PECM with oscillating cathode for external geometries using a virtual switch. In: Proceedings of the European COMSOL Conference, 2017, URL: https://www.comsol.com/paper/51481

Paul, R.; Hackert-Oschätzchen, M.; Zinecker, M.; Schubert, A.: Approximation of the Flow Field in Electrochemical Machining Incorporating Pressure Drop Calculation. In: Proceedings of the European COMSOL Conference, 2017, URL: https://www.comsol.com/paper/51471

Müller, B.; Schubert, A.: Micro structuring of AlMg4.5Mn0.7 sheets by a warm forming process. In: Procedia Engineering, 2017, Band 207, S. 1045–1050, DOI: 10.1016/j.proeng.2017.10.1128

Yahyavi Zanjani, M.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A.: Evaluation of on-machine gap measurement strategies in jet-electrochemical machining. In: Proceedings of the 13th International Symposium on ElectroChemical Machining Technology, 2017, S. 94–100, Hrsg.: Michaelis, A.; Schneider, M., ISBN: 978-3-8396-1261-3

Martin, A.; Hackert-Oschätzchen, M.; Lehnert, N.; Schubert, A.: Analysis of the removal geometry in electrochemical straight turning with continuous electrolytic free jet. In: Proceedings of the 13th International Symposium on ElectroChemical Machining Technology, 2017, S. 81–87, Hrsg.: Michaelis, A.; Schneider, M., ISBN: 978-3-8396-1261-3

Loebel, S.; Hackert-Oschätzchen, M.; Meichsner, G.; Schubert, A.: Development of interfaces for material data integration in models of electrochemical machining processes. In: Proceedings of the 13th International Symposium on ElectroChemical Machining Technology, 2017, S. 8–15, Hrsg.: Michaelis, A.; Schneider, M., ISBN: 978-3-8396-1261-3

Meichsner, G.; Petzold, T.; Hackert-Oschätzchen, M.; Edelmann, J.; Schubert, A.: Reduplication of Precise Internal Geometries by Pulsed Electrochemical Machining. In: Proceedings of the 13th International Symposium on ElectroChemical Machining Technology, 2017, S. 44–55, Hrsg.: Michaelis, A.; Schneider, M., ISBN: 978-3-8396-1261-3

Steinert, P.: Fertigung und Bewertung deterministischer Oberflächenmikrostrukturen zur Beeinflussung des tribologischen Verhaltens von Stahl-Bronze-Gleitpaarungen (Dissertation). In: Scripts Precision and Microproduction Engineering, 2017, Band 11, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-95735-076-3

Schimmelpfennig, R.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A.: Microstructuring of joining areas in aluminum alloy sheets by Jet Electrochemical Machining. In: Technologies for Lightweight Structures (TLS), 2017, Band 1(2), DOI: 10.21935/tls.v1i2.80

Sieber, M.; Morgenstern, R.; Kuhn, D.; Hackert-Oschätzchen, M.; Schubert, A.; Lampke, T.: Downscaled anodic oxidation process for aluminium in oxalic acid. In: IOP Conference Series: Materials Science and Engineering, 2017, Band 181, 012044, DOI: 10.1088/1757-899X/181/1/012044

Ali, I.; Saborowski, E.; Liborius, H.; Börner, R.; Schubert, A.; Lampke, T.: Investigation of porosity and oxide contents in thermally sprayed coatings – application and discussion of different methods. In: Tagungsband zum 19. Werkstofftechnischen Kolloquium, 2017, Band 61, S. 440, ISSN: 1439-1597

Kuhn, D.; Martin, A.; Eckart, C.; Sieber, M.; Morgenstern, R.; Hackert-Oschätzchen, M.; Lampke, T.; Schubert, A.: Localised anodic oxidation of aluminium material using a continuous electrolyte jet. In: IOP Conference Series: Materials Science and Engineering, 2017, Band 181, 012042, DOI: 10.1088/1757-899X/181/1/012042

Pippig, R.; Schmidl, E.; Steinert, P.; Schubert, A.; Lampke, T.: Experimental and numerical investigation of the residual yield strength of aluminium alloy EN AW-2024-T3 affected by artificially produced pitting corrosion. In: IOP Conference Series: Materials Science and Engineering, 2017, Band 181, 012023, DOI: 10.1088/1757-899X/181/1/012023

Börner, R.; Junge, T.; Schubert, A.: Oberflächensimulation und experimentelle Untersuchungen zur Mikrostrukturierung von Stahlwerkstoffen mittels schwingungsüberlagertem Planfräsen im Ultraschallbereich. In: Dry Metal Forming Open Access Journal, 2017, Band 3, S. 17–27, URL: http://nbn-resolving.de/urn:nbn:de:gbv:46-00105723-11

Kühn, R.; Berger, T.; Prieske, M.; Börner, R.; Hackert-Oschätzchen, M.; Zeidler, H.; Schubert, A.: Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with silicon. In: AIP Conference Proceedings, 2017, Band 1896(1), 050012, DOI: 10.1063/1.5008057

Herzig, M.; Berger, T.; Schulze, H.-P.; Hackert-Oschätzchen, M.; Kröning, O.; Schubert, A.: Modification of the process dynamics in micro-EDM by means of an additional piezo-control system. In: AIP Conference Proceedings, 2017, DOI: 10.1063/1.5008048

Mwangi, J. W.; Zeidler, H.; Wohlschlögel, M.; Bräuner, C.; Schubert, A.: Heat-affected zone analysis for laser-cut and micro-electrical discharge machined nitinol. In: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (SMST), 2017

Rajput, A. S.; Zeidler, H.; Schubert, A.: Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steel. In: Proc. euspen's 17th International Conference & Exhibition, 2017, ISBN: 978-0-9957751-0-7, URL: https://www.euspen.eu/knowledge-base/ICE17310.pdf

Mwangi, J. W.; Zeidler, H.; Berger, T.; Schubert, A.: Influence of dielectric fluid and tool electrode choice on micro-EDMed nitinol surface integrity. In: Proc. euspen's 17th International Conference & Exhibition, 2017, ISBN: 978-0-9957751-0-7, URL: https://www.euspen.eu/knowledge-base/ICE17309.pdf

Yahyavi Zanjani, M.; Zeidler, H.; Martin, A.; Schubert, A.: Application of Laser Scanning as a Pre‐machining metrology technique in Jet‐ECM. In: Proc. euspen's 17th International Conference & Exhibition, 2017, ISBN: 978-0-9957751-0-7, URL: https://www.euspen.eu/knowledge-base/ICE17266.pdf

Steinert, P.; Zinecker, M.; Schubert, A.: Manufacturing of surface microstructures by two-stage laser ablation. In: Proc. euspen's 17th International Conference & Exhibition, 2017, ISBN: 978-0-9957751-0-7, URL: https://www.euspen.eu/knowledge-base/ICE17248.pdf

Drossel, W.-G.; Schubert, A.; Putz, M.; Koriath, H.-J.; Wittstock, V.; Peter, S.; Hensel, S.; Pierer, A.; Müller, B.; Schmidt, M.: Experimental and numerical study on inherent sensory characteristics of piezoceramic micro parts during joining by forming. In: Proc. VIII ECCOMAS Thematic Conference on Smart Structures and Materials – SMART, 2017, S. 359–369, ISBN: 978-84-946909-3-8

Edelmann, J.; Albrecht, M.; Zeidler, H.; Gehde, M.; Schubert, A.: Investigation of various graphene fillers for improving properties of thermoplastic polymers. In: Proc. euspen's 17th International Conference & Exhibition, 2017, ISBN: 978-0-9957751-0-7, URL: https://www.euspen.eu/knowledge-base/ICE17221.pdf

2016

Zeidler, H.; Böttger-Hiller, F.; Edelmann, J.; Schubert, A.: Surface Finish Machining of Medical Parts Using Plasma Electrolytic Polishing. In: Procedia CIRP, 2016, Band 49, S. 83–87, DOI: 10.1016/j.procir.2015.07.038

Müller, M.; Müller, B.; Hensel, S.; Nestler, M.; Jahn, S. F.; Müller, R.; Schubert, A.; Drossel, W.-G.: Structural integration of piezoceramic fibers in deep drawn sheet metal for material-integrated health monitoring. In: Mechatronics, 2016, Band 34, S. 100–110, DOI: 10.1016/j.mechatronics.2015.09.006

Steinert, P.; Nestler, A.; Kühn, J.; Schubert, A.: Efficient Manufacturing of Tribological Surfaces by Turning Technologies with Alternating Movements. In: Proc. of International Conference on Competitive Manufacturing (COMA 16), 2016, S. 255–260, ISBN: 978-0-7972-1602-0

Schubert, A.; Götze, U.; Hackert-Oschätzchen, M.; Lehnert, N.; Herold, F.; Meichsner, G.; Schmidt, A.: Evaluation of the Technical-Economic Potential of Particle- Reinforced Aluminum Matrix Composites and Electrochemical Machining. In: IOP Conference Series: Materials Science and Engineering, 2016, Band 118, 012035, DOI: 10.1088/1757-899X/118/1/012035

Hackert-Oschätzchen, M.; Lehnert, N.; Martin, A.; Schubert, A.: Jet Electrochemical Machining of Particle Reinforced Aluminum Matrix Composites with Different Neutral Electrolytes. In: IOP Conference Series: Materials Science and Engineering, 2016, Band 118, 012036, DOI: 10.1088/1757-899X/118/1/012036

Schubert, A.; Zeidler, H.; Kühn, R.; Hackert-Oschätzchen, M.; Flemmig, S.; Treffkorn, N.: Investigation of Ablation Behaviour in Micro-EDM of Nonconductive Ceramic Composites ATZ and Si3N4-TiN. In: Procedia CIRP, 2016, Band 42, S. 727–732, DOI: 10.1016/j.procir.2016.02.309

Nestler, K.; Böttger-Hiller, F.; Adamitzki, W.; Glowa, G.; Zeidler, H.; Schubert, A.: Plasma Electrolytic Polishing – An Overview of Applied Technologies and Current Challenges to Extend the Polishable Material Range. In: Procedia CIRP, 2016, Band 42, S. 503–507, DOI: 10.1016/j.procir.2016.02.240

Schubert, A.; Hackert-Oschätzchen, M.; Martin, A.; Winkler, S.; Kuhn, D.; Meichsner, G.; Zeidler, H.; Edelmann, J.: Generation of Complex Surfaces by Superimposed Multi-dimensional Motion in Electrochemical Machining. In: Procedia CIRP, 2016, Band 42, S. 384–389, DOI: 10.1016/j.procir.2016.02.216

Jahn, S. F.; Müller, B.; Hilfinger, F. S.; Schubert, A.: Tribological impact of the finishing technology onto meso- and microforming processes. In: Manufacturing Review, 2016, Band 3, 4, DOI: 10.1051/mfreview/2016003

Meichsner, G.; Hackert-Oschätzchen, M.; Krönert, M.; Edelmann, J.; Schubert, A.; Putz, M.: Fast Determination of the Material Removal Characteristics in Pulsed Electrochemical Machining. In: Procedia CIRP, 2016, Band 46, S. 123–126, DOI: 10.1016/j.procir.2016.03.175

Clauß, B.; Nestler, A.; Schubert, A.: Investigation of Surface Properties in Milling of SiC Particle Reinforced Aluminium Matrix Composites (AMCs). In: Procedia CIRP, 2016, Band 46, S. 480–483, DOI: 10.1016/j.procir.2016.04.048

Martin, A.; Eckart, C.; Lehnert, N.; Hackert-Oschätzchen, M.; Schubert, A.: Generation of Defined Surface Waviness on Tungsten Carbide by Jet Electrochemical Machining with Pulsed Current. In: Procedia CIRP, 2016, Band 45, S. 231–234, DOI: 10.1016/j.procir.2016.02.076

Clauß, B.; Nestler, A.; Funke, R.; Schubert, A.: Untersuchungen zum Drehfräsen von SiC-Partikel-verstärkten Aluminiummatrix-Verbundwerkstoffen mit MKD-bestückten Fräswerkzeugen. Vortrag: 18. Werkstofftechnisches Kolloquium, Sondersession SFB HALS 692, Chemnitz, 14.03.2018–15.03.2018

Hackert-Oschätzchen, M.; Lehnert, N.; Martin, A.; Meichsner, G.; Schubert, A.: Surface Characterization of Particle Reinforced Aluminum-matrix Composites Finished by Pulsed Electrochemical Machining. In: Procedia CIRP, 2016, Band 45, S. 351–354, DOI: 10.1016/j.procir.2016.02.078

Funke, R.; Schubert, A.: Increase of the Coefficient of Static Friction Using Turn-milling with an Inclined Milling Spindle. In: Procedia CIRP, 2016, Band 45, S. 83–86, DOI: 10.1016/j.procir.2016.02.120

Katz-Demyanetz, A.; Squatrito, R.; Todaro, I.; Essel, S.; Zeidler, H.; Bamberger, M.: Manufacturing of Aluminum Metal Matrix Cast Composites with Carbon Based Additives for Thermal Management Applications. In: Materials Science Forum, 2016, Band 879, S. 909–914, DOI: 10.4028/www.scientific.net/MSF.879.909

Schulze, R.; Jahn, S. F.; Zeidler, H.; Lindner, T.; Schubert, A.: Multi material ultrasonic joining using microstructured joining partners. In: Proc. euspen’s 16th International Conference & Exhibition, 2016, S. 511–512, ISBN: 978-0-9566790-8-6, URL: https://www.euspen.eu/knowledge-base/ICE16-P7.16.pdf

Zeidler, H.; Nestler, K.; Böttger-Hiller, F.; Schubert, A.; Previtali, B.; Demir, A. G.: Finishing of laser-machined coronary stents by plasma electrolytic polishing. In: Proc. euspen’s 16th International Conference & Exhibition, 2016, S. 375–376, ISBN: 978-0-9566790-8-6, URL: https://www.euspen.eu/knowledge-base/ICE16-O5.2.pdf

Clauß, B.; Nestler, A.; Zeidler, H.; Schubert, A.; Rizzi, L.: Generation of thermally effective surface structures by ultrasonic vibration assisted turning. In: Proc. euspen’s 16th International Conference & Exhibition, 2016, S. 309–310, ISBN: 978-0-9566790-8-6, URL: https://www.euspen.eu/knowledge-base/ICE16-P4.11.pdf

Drossel, W.-G.; Schubert, A.; Putz, M.; Koriath, H.-J.; Wittstock, V.; Peter, S.; Hensel, S.; Nestler, M.; Jahn, S. F.; Müller, R.; Pierer, A.; Müller, B.; Schmidt, M.: Inherent process monitoring for piezoceramic transducer integration. In: Proc. euspen’s 16th International Conference & Exhibition, 2016, S. 233–234, ISBN: 978-0-9566790-8-6, URL: https://www.euspen.eu/knowledge-base/ICE16-P2.15.pdf

Mwangi, J. W.; Zeidler, H.; Kühn, R.; Schubert, A.: Suitability assessment of micro-EDM in machining Nitinol for medical applicatios. In: Proc. euspen’s 16th International Conference & Exhibition, 2016, S. 189–190, ISBN: 978-0-9566790-8-6, URL: https://www.euspen.eu/knowledge-base/ICE16-P1.72.pdf

Hackert-Oschätzchen, M.; Penzel, M.; Kreißig, M.; Kowalick, M.; Zinecker, M.; Meichsner, G.; Schubert, A.: Transient Simulation of an Electrochemical Machining Process for Stamping and Extrusion Dies. In: Proceedings of the European COMSOL Conference, 2016, URL: https://www.comsol.com/paper/36781

Hackert-Oschätzchen, M.; Lehnert, N.; Kowalick, M.; Scherf, C.; Martin, A.; Schubert, A.: Analysis of an Electrochemical Machining Process for Particle Reinforced Aluminum-Matrix Composites. In: Proceedings of the European COMSOL Conference, 2016, URL: https://www.comsol.com/paper/39731

Hackert-Oschätzchen, M.; Kowalick, M.; Paul, R.; Zinecker, M.; Kuhn, D.; Meichsner, G.; Schubert, A.: 2-D Axisymmetric Simulation of the Electrochemical Machining of Internal Precision Geometries. In: Proceedings of the European COMSOL Conference, 2016, URL: https://www.comsol.com/paper/36981

Zeidler, H.; Nestler, K.; Böttger-Hiller, F.; Schubert, A.; Previtali, B.; Demir, A. G.: Plasma-electrolytic polishing of laser-machined coronary stents. In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, S. 131–135, ISBN: 978-9-4619746-1-7

Spille-Kohoff, A.; Meichsner, G.; Hackert-Oschätzchen, M.; Schulze, R.; Busan, S.: 3D CFD Simulation of Electrochemical Machining Based on Dissolving Characteristics within the SIREKA Joint Research Project. In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, S. 121–127, ISBN: 978-9-4619746-1-7

Meichsner, G.; Hackert-Oschätzchen, M.; Petzold, T.; Krönert, M.; Edelmann, J.; Schubert, A.; Putz, M.: Removal Characteristic of Stainless Steel in Pulsed Electrochemical Machining. In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, S. 73–83, ISBN: 978-9-4619746-1-7

Martin, A.; Kuhn, D.; Hackert-Oschätzchen, M.; Schubert, A.: Design and Realisation of a Specific Device for Jet Electrochemical Machining of Rotating Work Pieces. In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, S. 39–44, ISBN: 978-9-4619746-1-7

Hackert-Oschätzchen, M.; Lehnert, N.; Meichsner, G.; Scherf, C.; Martin, A.; Schubert, A.: Experimental Derivation of Processing Strategies for Electrochemical Precision Machining of Aluminium Matrix Composites. In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, S. 65–71, ISBN: 978-9-4619746-1-7

Zinecker, M.; Penzel, M.; Zeidler, H.; Schubert, A.: Kombination von Aluminium mit Kohlenstoff-basierten Einsätzen. In: Konstruktion, 2016, Band 68(07-08), S. IW 4–IW 6, DOI: 10.37544/0720-5953-2016-07-08-52

Kühn, R.; Prieske, M.; Zeidler, H.; Schubert, A.; Vollertsen, F.: Lokale Beeinflussung der Oberflächenrauheit von Silizium dotiertem CVD-Diamant durch funkenerosive Mikrobearbeitung. In: Dry Metal Forming Open Access Journal, 2016, Band 2, S. 50–55, URL: https://nbn-resolving.de/urn:nbn:de:gbv:46-00105206-13

Martin, A.; Zeidler, H.; Hackert-Oschätzchen, M.; Schubert, A.: Analysis of the Reproducibility of Jet-ECM point Removals on Defined Shape Deviations. In: 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF), 2016, 712, S. 95–98, DOI: 10.3850/978-981-11-0749-8_712

2015

Meichsner, G.; Boenig, L.; Hackert-Oschätzchen, M.; Krönert, M.; Petzold, T.; Edelmann, J.; Schubert, A.: Quantifizierung der Gasentwicklung beim elektrochemischen Präzisionsabtragen. In: Galvanotechnik, 2015, Band 106(3), S. 484–489, ISSN: 0016-4232

Zeidler, H.; Kuhn, D.; Martin, A.; Meichsner, G.; Schubert, A.: Increasing Accuracy and Machining Speed in Precise Electrochemical Machining of a Micro Injection Molding Cavity. In: Proceedings of the 4M/ICOMM2015 Conference, 2015, 135, S. 542–545, DOI: 10.3850/978-981-09-4609-8_135

Zeidler, H.; Martin, A.; Kowalick, M.; Hackert-Oschätzchen, M.; Schubert, A.: Analysis of a PECM Electrode Concept for Micro Injection Moulds by Multiphysics Simulation. In: Proceedings of the 4M/ICOMM2015 Conference, 2015, 137, S. 550–553, DOI: 10.3850/978-981-09-4609-8_137

Quagliotti, D.; Tosello, G.; Islam, A. M.; Hansen, H. N.; Zeidler, H.; Martin, A.; Schubert, A.; Brandao, C.; Riemer, O.: A Method for Dimensional and Surface Optical Measurements Uncertainty Assessment on Micro Structured Surfaces Manufactured by Jet-ECM. In: Proceedings of the 4M/ICOMM2015 Conference, 2015, 138, S. 554–557, DOI: 10.3850/978-981-09-4609-8_138

Scholz, P.; Börner, R.; Kühn, R.; Müller, R.; Schubert, A.: Dry Forming of Aluminium Sheet Metal: Influence of Different Types of Forming Tool Microstructures on the Coefficient of Friction. In: Key Engineering Materials, 2015, Band 651-653, S. 516–521, DOI: 10.4028/www.scientific.net/KEM.651-653.516

Kröning, O.; Herzig, M.; Hackert-Oschätzchen, M.; Kühn, R.; Zeidler, H.; Schubert, A.: Micro Electrical Discharge Machining of Tungsten Carbide with Ultra-Short Pulse. In: Key Engineering Materials, 2015, Band 651-653, S. 759–764, DOI: 10.4028/www.scientific.net/KEM.651-653.759

Müller, B.; Jahn, S. F.; Fang, R.; Schubert, A.: Investigation of Tribological Properties of AlMg4,5Mn0,7 in a Warm Forming Process Using the Barrel Compression Test. In: Key Engineering Materials, 2015, Band 651-653, S. 633–638, DOI: 10.4028/www.scientific.net/KEM.651-653.633

Hackert-Oschätzchen, M.; Paul, R.; Martin, A.; Meichsner, G.; Lehnert, N.; Schubert, A.: Study on the dynamic generation of the jet shape in Jet Electrochemical Machining. In: Journal of Materials Processing Technology, 2015, Band 223, S. 240–251, DOI: 10.1016/j.jmatprotec.2015.03.049

Börner, R.; Scholz, P.; Kühn, R.; Schubert, A.; Zeidler, H.; Müller, R.: Micro structuring of coated tools for dry sheet metal forming of aluminium alloys. In: Proc. euspen’s 15th International Conference & Exhibition, 2015, S. 85–86, ISBN: 978-0-9566790-7-9 , URL: https://www.euspen.eu/knowledge-base/ICE15-P2.28.pdf

Quagliotti, D.; Tosello, G.; Islam, A. M.; Hansen, H. N.; Zeidler, H.; Martin, A.; Schubert, A.; Brandao, C.; Riemer, O.: Optical micro-metrology of structured surfaces micro-machined by jet-ECM. In: Proc. euspen’s 15th International Conference & Exhibition, 2015, S. 167–168, ISBN: 978-0-9566790-7-9 , URL: https://www.euspen.eu/knowledge-base/ICE15-P3.26.pdf

Schubert, A.; Zeidler, H.; Flemmig, S.; Penzel, M.; Krönert, M.; Meichsner, G.; Essel, S.: Challenge of machining aluminium matrix composites reinforced by diamonds. In: Proc. euspen’s 15th International Conference & Exhibition, 2015, S. 309–310, ISBN: 978-0-9566790-7-9 , URL: https://www.euspen.eu/knowledge-base/ICE15-P5.04.pdf

Hackert-Oschätzchen, M.; Paul, R.; Kowalick, M.; Martin, A.; Meichsner, G.; Schubert, A.: Multiphysics Simulation of the Material Removal in Jet Electrochemical Machining. In: Procedia CIRP, 2015, Band 31, S. 197–202, DOI: 10.1016/j.procir.2015.03.098

Zinecker, M.: Einsatz mikro- und mesostrukturierter Oberflächen zur Verbesserung des Wärmeübergangs bei der Siedekühlung (Dissertation). In: Scripts Precision and Microproduction Engineering, 2015, Band 9, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-95735-022-0

Nestler, A.; Schubert, A.: Effect of Machining Parameters on Surface Properties in Slide Diamond Burnishing of Aluminium Matrix Composites. In: Materials Today: Proceedings, 2015, Band 2, S. S156–S161, DOI: 10.1016/j.matpr.2015.05.033

Jahn, S. F.; Müller, B.; Hilfinger, F. S.; Schubert, A.: Tribological impact of the finishing technology onto meso- and microforming processes. In: MATEC Web of Conferences, 2015, Band 21, 09009, DOI: 10.1051/matecconf/20152109009

Meichsner, G.; Hackert-Oschätzchen, M.; Krönert, M.; Edelmann, J.; Schubert, A.; Hahn, G.; Putz, M.: Characterisation of the Influence of Material Hardness in Precise Electrochemical Machining of Steel. In: Proc. of the 17th International Conference on the Strength of Materials (ICSMA 17), 2015, DOI: 10.24406/publica-fhg-388946

Schubert, A.; Hackert-Oschätzchen, M.; Lehnert, N.; Martin, A.; Meichsner, G.: Analysis of Electrochemical Dissolution Characteristics of High-Strength Particle Reinforced Aluminium Matrix Composites. In: Proc. of the 17th International Conference on the Strength of Materials (ICSMA 17), 2015, DOI: 10.24406/publica-fhg-388944

Schubert, A.; Zeidler, H.; Kühn, R.; Hackert-Oschätzchen, M.: Microelectrical Discharge Machining: A Suitable Process for Machining Ceramics. In: Journal of Ceramics, 2015, Band 2015, S. 1–9, DOI: 10.1155/2015/470801

Drossel, W.-G.; Schubert, A.; Koriath, H.-J.; Wittstock, V.; Peter, S.; Müller, R.; Müller, M.; Hensel, S.; Nestler, M.; Jahn, S. F.; Pierer, A.; Müller, B.; Schmidt, M.: Experimental and numerical study on the electro-mechanical behavior of piezoceramic fibers during joining by forming. In: 5th Scientific Symposium "Lightweight Design by Integrating Functions" of the CRC/Transregio 39, 2015, S. 71–76, ISBN: 978-3-00-050383-2

Müller, B.; Jahn, S. F.; Peter, S.; Schubert, A.: Determination of the critical strain of thin Plasma CVD insulation layers using the barrel compression test. In: 5th Scientific Symposium "Lightweight Design by Integrating Functions" of the CRC/Transregio 39, 2015, S. 53–58, ISBN: 978-3-00-050383-2

Spille-Kohoff, A.; Schulze, R.; Meichsner, G.; Hackert-Oschätzchen, M.; Busan, S.: Optimized design of electrochemical machining processes by a combination of 3D simulation and rapid prototyping of cathodes. In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015, S. 11–18

Hackert-Oschätzchen, M.; Morgenstern, R.; Lehnert, N.; Martin, A.; Lampke, T.; Schubert, A.: Basic Research on Electrochemical Machining of Particle Reinforced Aluminium Matrix Composites. In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015, S. 35–42

Qian, J.; Zeidler, H.: High precision technologies for micro manufacturing. Vortrag: Industrial Workshop "Revolutionary Technologies in Micro Injection Moulding", Leuven, 30.09.2015

Schulze, R.; Frenzel, P.; Hausner, S.; Noll, J.; Jahn, S. F.; Jakob, A.; Schubert, A.; Lang, H.; Wagner, G.: Joining of copper using silver nanoparticles under mild conditions. In: 2nd International MERGE Technologies Conference for Lightweight Structures (IMTC 2015), 2015, S. 389–393, ISBN: 978-3-95735-025-1 

Hackert-Oschätzchen, M.: Gestaltung von elektrochemischen Abtragprozessen durch Multiphysiksimulation gezeigt an der Endformgebung von Mikrobohrungen (Habilitation). In: Scripts Precision and Microproduction Engineering, 2015, Band 10, Hrsg.: Schubert, A., ISBN: 978-3-95735-028-2

Schubert, A.; Hackert-Oschätzchen, M.; Lehnert, N.: Endformgebung von hochfesten, partikelverstärkten Aluminiummatrix­-Verbund­werkstoffen (AMCs) durch elektrochemisches Abtragen. In: DGM-diALOG, 2015, Ausgabe 4, S. 104–107, ISSN: 2193-3383

Nestler, A.; Schubert, A.; Clauß, B.: Erzeugung definierter Oberflächeneigenschaften durch spanende und umformende Endbearbeitung partikelverstärkter Leichtbauwerkstoffe. In: DGM-diALOG, 2015, Ausgabe 4, S. 98–102, ISSN: 2193-3383

Scholz, P.; Börner, R.; Landgrebe, D.; Müller, R.; Schubert, A.: Trockenumformen von Aluminiumblech: Einfluss von Mikrostrukturierungen der Werkzeugaktivteilfläche auf den Gleitreibwert. In: Dry Metal Forming Open Access Journal, 2015, Band 1, S. 159–164, URL: https://nbn-resolving.de/urn:nbn:de:gbv:46-00105198-19

2014

Schubert, A.; Wittstock, V.; Koriath, H.-J.; Jahn, S. F.; Peter, S.; Müller, B.; Müller, M.: Smart metal sheets by direct functional integration of piezoceramic fibers in microformed structures. In: Microsystem Technologies, 2014, Band 20(6), S. 1131–1140, DOI: 10.1007/s00542-013-1836-6

Schubert, A.; Wittstock, V.; Jahn, S. F.; Müller, B.; Müller, M.: Joining by forming of piezoceramic macro-fiber arrays within micro-structured surfaces of aluminum sheets. In: Production Engineering, 2014, Band 8(1-2), S. 195–205, DOI: 10.1007/s11740-013-0498-7

Drossel, W.-G.; Hensel, S.; Nestler, M.; Lachmann, L.; Schubert, A.; Müller, M.; Müller, B.: Experimental and numerical study on shaping of aluminum sheets with integrated piezoceramic fibers. In: Journal of Materials Processing Technology, 2014, Band 214(2), S. 217–228, DOI: 10.1016/j.jmatprotec.2013.08.011

Schubert, A.; Jahn, S. F.; Müller, B.: Modular tool concept and process design for micro impact extrusion. In: Precision Engineering, 2014, Band 38(1), S. 57–63, DOI: 10.1016/j.precisioneng.2013.07.004

Schubert, A.; Zeidler, H.; Jahn, S. F.; Flemmig, S.; Schulze, R.: Vibration Analysis of an Ultrasonic-assisted Joining System. In: Procedia Engineering, 2014, Band 69, S. 1021–1028, DOI: 10.1016/j.proeng.2014.03.085

Lohrengel, M. M.; Rataj, K. P.; Schubert, N.; Schneider, M.; Höhn, S.; Michaelis, A.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A.: Electrochemical machining of hard metals – WC/Co as example. In: Powder Metallurgy, 2014, Band 57(1), S. 21–30, DOI: 10.1179/1743290113Y.0000000062

Schubert, A.; Kirbach, M.; Zeidler, H.: Energy Demand Calculations of Cutting Processes – Using the Example of Manufacturing Pockets. In: 3rd International Chemnitz Manufacturing Colloquium ICMC 2014 - Proceedings Part 2, 2014, Band 81, S. 851–870, ISBN: 978-3-95735-004-6

Schubert, A.; Steinert, P.; Kirbach, M.; Zhang, R.; Zeidler, H.: Energy-Efficient Finishing Technologies for Powertrain Applications. In: 3rd International Chemnitz Manufacturing Colloquium ICMC 2014 - Proceedings Part 1, 2014, Band 80, S. 105–122, ISBN: 978-3-95735-004-6

Zeidler, H.; Schubert, A.: Verschieben der Prozessgrenzen – Hybride Abtragtechnologien in der Präzisions- und Mikrofertigung. In: 3rd International Chemnitz Manufacturing Colloquium ICMC 2014 - Proceedings Part 1, 2014, Band 80, S. 265–282, ISBN: 978-3-95735-004-6

Hackert-Oschätzchen, M.; Boenig, L.; Meichsner, G.; Zinecker, M.; Krönert, M.; Martin, A.; Schubert, A.: Elektrochemisches Präzisionsabtragen rotierender Werkstücke. In: Galvanotechnik, 2014, Band 105(3), S. 462–467, ISSN: 0016-4232

Schubert, A.; Meichsner, G.; Boenig, L.; Hackert-Oschätzchen, M.; Krönert, M.: Ressourceneffiziente Gestaltung des elektrochemischen Präzisionsabtragens. In: Galvanotechnik, 2014, Band 105(4), S. 703–709, ISSN: 0016-4232

Kröning, O.; Herzig, M.; Schulze, H.-P.; Hackert-Oschätzchen, M.; Kühn, R.; Zeidler, H.; Schubert, A.: Resource-Efficient Machining of Hard Metals. In: Key Engineering Materials, 2014, Band 611-612, S. 708–714, DOI: 10.4028/www.scientific.net/KEM.611-612.708

Schubert, A.; Jahn, S. F.; Müller, B.: Evaluation of Tribological Properties of AlMg4.5Mn0.7 in Massive Microforming Using the Barrel Compression Test. In: Key Engineering Materials, 2014, Band 611-612, S. 597–605, DOI: 10.4028/www.scientific.net/KEM.611-612.597

Schubert, A.; Zinecker, M.; Hackert-Oschätzchen, M.; Lausberg, M.; Schulz, A.: Application of Nucleate Boiling with Micro Structured Surfaces for Electronic Cooling. In: Proceedings of the PCIM EUROPE, 2014, S. 1141–1148, ISBN: 978-3-8007-3603-4

Nestler, A.; Schubert, A.: Surface Properties in Ultrasonic Vibration Assisted Turning of Particle Reinforced Aluminium Matrix Composites. In: Procedia CIRP, 2014, Band 13, S. 125–130, DOI: 10.1016/j.procir.2014.04.022

Zhang, R.; Steinert, P.; Schubert, A.: Microstructuring of Surfaces by Two-stage Vibration-assisted Turning. In: Procedia CIRP, 2014, Band 14, S. 136–141, DOI: 10.1016/j.procir.2014.03.026

Hackert-Oschätzchen, M.; Martin, A.; Meichsner, G.; Schubert, A.: Analysis of Strategies for Gap Control in Jet Electrochemical Machining. In: Proceedings of the 14th euspen International Conference, 2014, Band 2, S. 439–442, ISBN: 978-0-9566790-3-1, URL: https://www.euspen.eu/knowledge-base/ICE14-P8.01.pdf

Schubert, A.; Zeidler, H.; Martin, A.; Hackert-Oschätzchen, M.; Kempen, K.; Kruth, J.-P.: Jet-Electrochemical Machining of Selective Laser Melted Aluminum and Steel Alloys for Micro Injection Moulds. In: Proceedings of the 14th euspen International Conference, 2014, Band 2, S. 367–370, ISBN: 978-0-9566790-3-1, URL: https://www.euspen.eu/knowledge-base/ICE14-P7.18.pdf

Schubert, A.; Zeidler, H.; Flemmig, S.; Penzel, M.: Simulation of the Anisotropic Thermal Conductivity Generated by Graphene Integration in Aluminium Matrices. In: Proceedings of the 14th euspen International Conference, 2014, Band 2, S. 363–366, ISBN: 978-0-9566790-3-1, URL: https://www.euspen.eu/knowledge-base/ICE14-P7.17.pdf

Schubert, A.; Zinecker, M.; Hackert-Oschätzchen, M.; Lausberg, M.; Schulz, A.: An investigation into the influence of micro structures on nucleate boiling processes. In: WIT Transactions on Engineering Sciences, 2014, Band 83, DOI: 10.2495/HT140061

Schubert, A.; Zeidler, H.; Flemmig, S.; Penzel, M.; Essel, S.: Graphene Aluminium Matrix Nano-Composites for Heat Transfer Applications. In: Proceedings of the 4th International Conference on Nanomanufacturing – nanoMan2014, 2014

Schubert, A.; Jahn, S. F.; Müller, B.: Generation of Microcavities in Aluminium Sheets by Forming. In: Proceedings of the 4th International Conference on Nanomanufacturing – nanoMan2014, 2014

Mwangi, J. W.; Ikua, B. W.; Nyakoe, G. N.; Zeidler, H.; Kabini, S. K.: Effect of Dielectric Fluid and Vibration on Performance in Electrical Discharge Machining of AlSiC Metal Matrix Composites. In: Proceedings of the Sustainable Research and Innovation (SRI) Conference, 2014, Band 5, ISSN: 2079-6226

Hackert-Oschätzchen, M.; Penzel, M.; Kowalick, M.; Meichsner, G.; Schubert, A.: Transient Simulation of the Electrolyte Flow in a Closed Device for Precise Electrochemical Machining. In: Proceedings of the European COMSOL Conference, 2014, URL: https://www.comsol.com/paper/18145

Hackert-Oschätzchen, M.; Lehnert, N.; Kowalick, M.; Meichsner, G.; Schubert, A.: Analysis of the Electrochemical Removal of Aluminium Matrix Composites Using Multiphysics Simulation. In: Proceedings of the European COMSOL Conference, 2014, URL: https://www.comsol.com/paper/18147

Müller, M.; Müller, B.; Hensel, S.; Nestler, M.; Jahn, S. F.; Wittstock, V.; Schubert, A.; Drossel, W.-G.: Structural Integration of PZT Fibers in Deep Drawn Sheet Metal for Material-integrated Sensing and Actuation. In: Procedia Technology, 2014, Band 15, S. 658–667, DOI: 10.1016/j.protcy.2014.09.027

Schubert, A.; Drossel, W.-G.; Jahn, S. F.; Müller, M.; Müller, B.: Direkte Integration von Piezosensorik in Aluminiumbleche. In: Proceedings 12. Chemnitzer Fachtagung Mikromechanik & Mikroelektronik, 2014, S. 192–199, ISBN: 978-3-00-047625-9

Schubert, A.; Jahn, S. F.; Schulze, R.; Mehner, J.; Schaufuß, J.: Joining and contacting of sensor modules on printed electronics using ultrasonic vibration. In: Tagungsband zum 17. Werkstofftechnischen Kolloquium, 2014, ISBN: 978-3-00-046877-3

Schubert, A.; Jahn, S. F.; Schulze, R.: Contacting of sensor modules on printed electronics using ultrasonic-assisted joining. Poster: Materials Science Engineering, Darmstadt, 2014

Winkler, S.; Edelmann, J.; Schubert, A.; Hackert-Oschätzchen, M.: Elektrochemisches Präzisionsabtragen - neue Möglichkeiten zur Formgebung schwer bearbeitbarer Werkstoffe. In: Ingenieur-Spiegel, 2014, Ausgabe 3, S. 84–85, ISSN: 1868-5919

Jahn, S. F.; Funke, R.; Schubert, A.: Die E-Übung als Ergänzung zur Präsenzvorlesung – Konzept, Umsetzung und Herausforderungen am Beispiel der Lehrveranstaltung "Betriebsmittel“. Vortrag: HDS.Forum Lehre 2014, Freiberg, 06.–07.11.2014

Meichsner, G.; Boenig, L.; Hackert-Oschätzchen, M.; Krönert, M.; Petzold, T.; Edelmann, J.; Schubert, A.: Determination of the gas generation during precise electrochemical machining. In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, S. 63–75, Hrsg.: Bähre, D.; Rebschläger, A., ISBN: 978-3-95735-010-7

Hackert-Oschätzchen, M.; Martin, A.; Meichsner, G.; Schubert, A.: Evaluation of Gap Control Strategies in Jet Electrochemical Machining on Defined Shape Deviations. In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, S. 23–35, Hrsg.: Bähre, D.; Rebschläger, A., ISBN: 978-3-95735-010-7

Schubert, A.; Funke, R.; Zeidler, H.; Edelmann, J.; Steinert, P.; Zhang, R.: Surface Engineering by Microstructuring Processes. Vortrag: euspen Topical Meeting “Structured & Freeform Surfaces”, Padua, 19.–20.11.2014,

Zhang, R.; Schubert, A.; Zeidler, H.: Drallfreie Bearbeitung mittels Start-Stopp-Drehverfahren. In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2014, Band 109(12), S. 889–894, DOI: 10.3139/104.111261

Zeidler, H.: THERMACO - Advanced materials: Overcoming technical challenges, Interview. In: CECIMO Magazine, 2014, Ausgabe 9, S. 43, URL: https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO_magazine_Fall_2014_web-1.pdf#page=43

Zhang, R.; Schubert, A.: Verfahren und Einrichtung zur spanenden Herstellung eines wenigstens eine rotationssymmetrische Fläche aufweisenden Werkstückes durch Drehen. 2014, Deutsches Patent DE102012023115B3, B23B 1/00, Anmeldedatum: 25.11.2012, URL: https://depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=DE102012023115B3

2013

Steinert, P.; Göppert, S.; Platzer, B.: Transient calculation of charge and discharge cycles in thermally stratified energy storages. In: Solar Energy, 2013, Band 97, S. 505–516, DOI: 10.1016/j.solener.2013.08.039

Hackert-Oschätzchen, M.; Martin, A.; Meichsner, G.; Zinecker, M.; Schubert, A.: Microstructuring of carbide metals applying Jet Electrochemical Machining. In: Precision Engineering, 2013, Band 37(3), S. 621–634, DOI: 10.1016/j.precisioneng.2013.01.007

Schubert, A.; Meichsner, G.; Hackert-Oschätzchen, M.; Martin, A.; Edelmann, J.: Präzises, elektrochemisches Mikro-Drahtschneiden. In: Galvanotechnik, 2013, Band 104(3), S. 484–490, ISSN: 0016-4232

Hackert-Oschätzchen, M.; Martin, A.; Meichsner, G.; Kowalick, M.; Zeidler, H.; Schubert, A.: Inverse Jet Electrochemical Machining for Functional Edge Shaping of Micro Bores. In: Procedia CIRP, 2013, Band 6, S. 378–383, DOI: 10.1016/j.procir.2013.03.060

Neugebauer, R.; Schubert, A.; Drossel, W.-G.; Lachmann, L.; Koriath, H.-J.; Jahn, S. F.; Nestler, M.; Hensel, S.; Müller, M.; Müller, B.: Deep Drawing of Metal Sheets with Integrated Piezo-Metal Substructures. In: 4th Scientific Symposium "Lightweight Design by Integrating Functions" of the CRC/Transregio 39, 2013

Schubert, A.; Zeidler, H.; Hackert-Oschätzchen, M.; Schneider, J.; Hahn, M.: Enhancing Micro-EDM using Ultrasonic Vibration and Approaches for Machining of Nonconducting Ceramics. In: Strojniški vestnik – Journal of Mechanical Engineering, 2013, Band 59(3), S. 156–164, DOI: 10.5545/sv-jme.2012.442

Nestler, A.: Erzeugung definierter Oberflächeneigenschaften bei der Drehbearbeitung von partikelverstärkten Aluminiummatrix-Verbundwerkstoffen (Dissertation). In: Scripts Precision and Microproduction Engineering, 2013, Band 6, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-942267-71-7

Schubert, A.; Zinecker, M.; Hackert-Oschätzchen, M.; Lausberg, M.; Schulz, A.: Energy-efficient cooling using microstructures for nucleate boiling process. In: Proceedings of the PCIM EUROPE, 2013, S. 1036–1041, ISBN: 978-3-8007-3505-1

Neugebauer, R.; Schubert, A.; Koriath, H.-J.; Jahn, S. F.; Müller, B.; Müller, M.: Microfabricated piezo-metal substructures for sensor integration in large sheet metal parts. In: Proceedings of the 13th euspen International Conference, 2013, Band 2, S. 109–112, ISBN: 978-0-9566790-2-4

Nestler, A.; Schubert, A.: Reduction of Surface Imperfections in Turning of Aluminium Matrix Composites by an Appropriate Cutting Edge Design. In: Proceedings of the 13th euspen International Conference, 2013, Band 2, S. 327–330, ISBN: 978-0-9566790-2-4, URL: https://www.euspen.eu/knowledge-base/ICE13450.pdf

Schubert, A.; Zhang, R.; Steinert, P.: Manufacturing of Twist-free Surfaces by Hard Turning. In: Procedia CIRP, 2013, Band 7, S. 294–298, DOI: 10.1016/j.procir.2013.05.050

Schubert, A.; Jahn, S. F.; Müller, B.: Microstructuring by a Combination of Micro Impact Extrusion and Shear Displacement Forming. In: Key Engineering Materials, 2013, Band 554-557, S. 893–899, DOI: 10.4028/www.scientific.net/KEM.554-557.893

Schubert, A.; Neugebauer, R.; Jahn, S. F.; Müller, M.; Müller, B.: Integration von Piezosensorik in Aluminiumbleche für das Structural Health Monitoring. In: 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2013, S. 664–672, DOI: 10.24406/publica-fhg-380792

Schubert, A.; Zeidler, H.; Hahn, M.; Hackert-Oschätzchen, M.; Schneider, J.: Micro-EDM Milling of Electrically Nonconducting Zirconia Ceramics. In: Procedia CIRP, 2013, Band 6, S. 297–302, DOI: 10.1016/j.procir.2013.03.026

Schubert, A.; Zinecker, M.; Hackert-Oschätzchen, M.; Lausberg, M.; Schulz, A.: Determining of micro structuring technologies for nucleate boiling surfaces. In: Proceedings of the 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2013

Hackert-Oschätzchen, M.; Martin, A.; Kühn, R.; Meichsner, G.; Zinecker, M.; Schubert, A.: Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl - Teil 1. In: Galvanotechnik, 2013, Band 104(6), S. 1133–1139, ISSN: 0016-4232

Hackert-Oschätzchen, M.; Martin, A.; Kühn, R.; Meichsner, G.; Zinecker, M.; Schubert, A.: Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl - Teil 2. In: Galvanotechnik, 2013, Band 104(7), S. 1308–1321, ISSN: 0016-4232

Hackert-Oschätzchen, M.; Kreißig, M.; Kowalick, M.; Zeidler, H.; Schubert, A.; Kröning, O.; Herzig, M.; Schulze, H.-P.: Single Discharge Simulations of Needle Pulses for Electrothermal Ablation. In: Proceedings of the European COMSOL Conference, 2013, ISBN: 978-0-9910001-5-9, URL: https://www.comsol.com/paper/15366

Hackert-Oschätzchen, M.; Paul, R.; Penzel, M.; Zinecker, M.; Schubert, A.: Simulation of Heat Transfer on Periodic Microstructured Surfaces for Evaporation Cooling. In: Proceedings of the European COMSOL Conference, 2013, ISBN: 978-0-9910001-5-9, URL: https://www.comsol.com/paper/15364

Hackert-Oschätzchen, M.; Kowalick, M.; Meichsner, G.; Schubert, A.; Hommel, B.; Jähn, F.; Scharrnbeck, M.; Garn, R.; Lenk, A.: 2D Axisymmetric Simulation of the Electrochemical Finishing of Micro Bores by Inverse Jet Electrochemical Machining. In: Proceedings of the European COMSOL Conference, 2013, ISBN: 978-0-9910001-5-9, URL: https://www.comsol.com/paper/15362

Schubert, A.; Meichsner, G.; Boenig, L.; Hackert-Oschätzchen, M.; Krönert, M.; Edelmann, J.: Resource-Efficient Design of Precise Electrochemical Machining. In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, S. 53–64, Hrsg.: Schubert, A.; Hackert-Oschätzchen, M., ISBN: 978-3-942267-95-3

Zeidler, H.; Martin, A.; Hackert-Oschätzchen, M.; Meichsner, G.; Schubert, A.: Jet Electrochemical Machining of Selective Laser Melted Metals for Micro Injection Moulds. In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, S. 101–112, Hrsg.: Schubert, A.; Hackert-Oschätzchen, M., ISBN: 978-3-942267-95-3

Hackert-Oschätzchen, M.; Boenig, L.; Meichsner, G.; Zinecker, M.; Krönert, M.; Schubert, A.: Precise Electrochemical Machining of Rotating Workpieces. In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, S. 89–100, Hrsg.: Schubert, A.; Hackert-Oschätzchen, M., ISBN: 978-3-942267-95-3

Hommel, B.; Jähn, F.; Scharrnbeck, M.; Garn, R.; Lenk, A.; Hackert-Oschätzchen, M.; Meichsner, G.; Schubert, A.: Edge Rounding of Micro Bores by Inverse Jet Electrochemical Machining. In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, S. 33–44, Hrsg.: Schubert, A.; Hackert-Oschätzchen, M., ISBN: 978-3-942267-95-3

Zhang, R.: Spanen thermoplastischer Kunststoffe mit vielschneidigen geometrisch nicht bestimmten Schneiden (Schleifen und Polieren) (Dissertation). In: Scripts Precision and Microproduction Engineering, 2013, Band 8, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-942267-97-7

Zhang, R.; Schubert, A.: Substitution energieintensiver Prozesse - Beispiel Hartdrehen statt Schleifen. In: Handbuch Ressourcenorientierte Produktion, 2013, S. 672–674, Carl Hanser Verlag, ISBN: 978-3-446-43008-2

2012

Jahn, S. F.: Möglichkeiten und Herausforderungen des Funktionsdrucks mittels Inkjettechnologie, gezeigt an zwei Anwendungsbeispielen (Dissertation). In: Scripts Precision and Microproduction Engineering, 2012, Band 3, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-942267-35-9

Schubert, A.; Meichsner, G.; Hackert-Oschätzchen, M.; Zinecker, M.; Edelmann, J.: Präzise elektrochemische Bearbeitung von pulvermetallurgischen Stählen. In: Galvanotechnik, 2012, Band 103(4), S. 710–715, ISSN: 0016-4232

Götze, U.; Schubert, A.; Bierer, A.; Goller, S.; Sygulla, R.: Material- und Energieflussanalyse – Methodik zur Optimierung von Prozessen und Prozessketten. In: Tagungsband ICMC 2012 / 2. eniPROD Kolloquium, 2012, S. 99–128, ISBN: 978-3-942267-40-3

Schubert, A.; Zeidler, H.; Wolf, N.; Hackert-Oschätzchen, M.; Schneider, J.: Ultrasonic-Assisted Micro-EDM of Deep Bores: Process and Discharge Analysis. In: Proceedings of the 12th euspen International Conference, 2012, Band 2, S. 391–394, ISBN: 978-0-9566790-0-0, URL: https://www.euspen.eu/knowledge-base/ICE12318.pdf

Schubert, A.; Meichsner, G.; Hackert-Oschätzchen, M.; Zeidler, H.: Functional Edge Shaping of Micro Bores by Applying Electrochemical Machining. In: Proceedings of the 12th euspen International Conference, 2012, Band 2, S. 420–423, ISBN: 978-0-9566790-0-0, URL: https://www.euspen.eu/knowledge-base/ICE12325.pdf

Hackert-Oschätzchen, M.; Martin, A.; Meichsner, G.; Schubert, A.: Micro Structuring of Carbide Metals with Jet Electrochemical Machining. In: Proceedings of the 12th euspen International Conference, 2012, Band 2, S. 528–532, ISBN: 978-0-9566790-0-0, URL: https://www.euspen.eu/knowledge-base/ICE12351.pdf

Schubert, A.; Jahn, S. F.; Müller, B.: Influence of Different Tool Materials, Coatings and Lubricants onto Shape Accuracy during Micro Impact Extrusion. In: Proceedings of the 12th euspen International Conference, 2012, Band 2, S. 75–79, ISBN: 978-0-9566790-0-0, URL: https://www.euspen.eu/knowledge-base/ICE12246.pdf

Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Martin, A.; Schubert, A.: Evaluierung des Einflusses des elektrischen Potenzials beim Jet-ECM. In: Galvanotechnik, 2012, Band 103(6), S. 1196–1200, ISSN: 0016-4232

Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Martin, A.; Schubert, A.: Micro machining with continuous electrolytic free jet. In: Precision Engineering, 2012, Band 36(4), S. 612–619, DOI: 10.1016/j.precisioneng.2012.05.003

Zeidler, H.: Schwingungsunterstützte Mikro-Funkenerosion (Dissertation). In: Scripts Precision and Microproduction Engineering, 2012, Band 4, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-942267-44-1

Schubert, A.; Nestler, A.; Mehner, T.: Influencing the residual stresses in the surface layer by use of appropriate cutting parameters and tool geometries in turning of aluminium matrix composites. In: Materialwissenschaft und Werkstofftechnik, 2012, Band 43(7), S. 648–655, DOI: 10.1002/mawe.201200012

Funke, R.; Schubert, A.: Inprozess-Mikrostrukturierung. Gezielte Oberflächenstrukturierung durch orthogonales Drehfräsen mit angestellter Spindelachse. In: WB Werkstatt und Betrieb, 2012, Ausgabe 07-08, S. 66–69, ISSN: 0043-2792

Schubert, A.; Zhang, R.; Steinert, P.; Zeidler, H.; Kirbach, M.: Energieeffiziente Herstellung von Powertrain-Komponenten in der Automobil- und Zulieferindustrie. In: Tagungsband Mobilität im Wandel, 2012, S. 50–56, ISBN: 978-3-9815433-0-8

Zeidler, H.; Hahn, M.; Schneider, J.; Hackert-Oschätzchen, M.; Schubert, A.: Accelerated Precision Manufacturing through Electro Discharge Machining with Ultrasonic Vibration Assistance. In: Proceedings of the 29th Danubia-Adria Symposium, 2012, ISBN: 978-86-7083-762-1

Hackert-Oschätzchen, M.; Meichsner, G.; Martin, A.; Zeidler, H.; Schubert, A.: Fast Micromilling with Jet Electrochemical Machining. In: Proceedings of the 29th Danubia-Adria Symposium, 2012, ISBN: 978-86-7083-762-1

Hackert-Oschätzchen, M.; Penzel, M.; Plänitz, P.; Schubert, A.: Pseudo-3D Multiphysics Simulation of a Hydride Vapor Phase Epitaxy Reactor. In: Proceedings of the European COMSOL Conference, 2012, ISBN: 978-0-9839688-7-0, URL: https://www.comsol.com/paper/13265

Hackert-Oschätzchen, M.; Kowalick, M.; Meichsner, G.; Schubert, A.: Multiphysics Simulation of the Electrochemical Finishing of Micro Bores. In: Proceedings of the European COMSOL Conference, 2012, ISBN: 978-0-9839688-7-0, URL: https://www.comsol.com/paper/13267

Schubert, A.; Zeidler, H.; Meyer, W.; Unger, M.; Hackert-Oschätzchen, M.: Edge rounding of EDM micro bores using a plasma electrolytic polishing process. In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, S. 161–168, Hrsg.: Zybura-Skrabalak, M., ISBN: 978-83-931339-5-6

Schubert, A.; Meichsner, G.; Hackert-Oschätzchen, M.; Martin, A.; Edelmann, J.: Micro Wire Cutting by Pulsed Electrochemical Machining. In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, S. 107–118, Hrsg.: Zybura-Skrabalak, M., ISBN: 978-83-931339-5-6

Hackert-Oschätzchen, M.; Martin, A.; Meichsner, G.; Schubert, A.: Effect of Tungsten Carbide Grain Size in Jet Electrochemical Machining. In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, S. 119–129, Hrsg.: Zybura-Skrabalak, M., ISBN: 978-83-931339-5-6

Schubert, A.; Jahn, S. F.; Müller, B.: Umformende Mikrostrukturierung von Blechwerkstoffen für die Herstellung von Piezo-Metall-Modulen. In: Proceedings of the 4th International Conference on Accuracy in Forming Technology (ICAFT), 2012, S. 411–424, ISBN: 978-3-942267-61

Schubert, A.; Steinert, P.; Schmidt, T.; Hackert-Oschätzchen, M.: Manufacturing of Tribologically Optimized Surfaces for Powertrain Applications. In: Key Engineering Materials, 2012, Band 523-524, S. 799–804, DOI: 10.4028/www.scientific.net/KEM.523-524.799

Schubert, A.; Zinecker, M.; Hackert-Oschätzchen, M.; Zeidler, H.; Edelmann, J.: Micro Structured Surfaces for Thermodynamics Applications. In: euspen Topical Meeting: Structured & Freeform Surfaces, 2012

2011

Schubert, A.; Nestler, A.: Enhancement of Surface Integrity in Turning of Particle Reinforced Aluminium Matrix Composites by Tool Design. In: Procedia Engineering, 2011, Band 19, S. 300–305, DOI: 10.1016/j.proeng.2011.11.116

Schubert, A.; Drossel, W.-G.; Schneider, J.; Junker, T.; Ullrich, M.: Funktionserweiterung von Werkzeugmaschinen durch mechatronische Komponente. In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2011, Band 106(7-8), S. 557–561, DOI: 10.3139/104.110605

Schubert, A.; Groß, S.; Schulz, B.; Eckert, U.: Sequential combination of micro-milling and laser structuring for manufacturing of complex micro-fluidic structures. In: Physics Procedia, 2011, Band 12, S. 221–229, DOI: 10.1016/j.phpro.2011.03.127

Garn, R.; Schubert, A.; Zeidler, H.: Analysis of the effect of vibrations on the micro-EDM process at the workpiece surface. In: Precision Engineering, 2011, Band 35(2), S. 364–368, DOI: 10.1016/j.precisioneng.2010.09.015

Schubert, A.; Edelmann, J.; Groß, S.; Zeidler, H.; Meichsner, G.; Hackert, M.; Wolf, N.; Schneider, J.: Micromanufacturing Of Hard To Machine Materials By Physical And Chemical Ablation Processes. In: AIP Conference Proceedings, 2011, Band 1315, S. 1279–1284, DOI: 10.1063/1.3552360

Schubert, A.; Zeidler, H.; Wolf, N.; Hackert, M.: Micro Electro Discharge Machining of Electrically Nonconductive Ceramics. In: AIP Conference Proceedings, 2011, Band 1535(1), S. 1303–1308, DOI: 10.1063/1.3589696

Hackert-Oschätzchen, M.; Meichsner, G.; Zeidler, H.; Zinecker, M.; Schubert, A.: Micro Machining of Different Steels with Closed Electrolytic Free Jet. In: AIP Conference Proceedings, 2011, Band 1353(1), S. 1337–1343, DOI: 10.1063/1.3589702

Schubert, A.; Reichmann, B.; Goller, S.: Einfluss der Werkzeuggeometrie auf den Energiebedarf. In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2011, Band 106(4), S. 231–236, DOI: 10.3139/104.110544

Schubert, A.; Goller, S.; Sonntag, D.; Nestler, A.: Implementation of energy-related aspects into model-based design of processes and process chains. In: 2011 IEEE International Symposium on Assembly and Manufacturing (ISAM), 2011, DOI: 10.1109/ISAM.2011.5942344

Rünger, G.; Schubert, A.; Goller, S.; Krellner, B.; Steger, D.: Integrating Energy-Saving Process Chains and Product Data Models. In: Glocalized Solutions for Sustainability in Manufacturing, 2011, S. 519–524, Springer Berlin Heidelberg, DOI: 10.1007/978-3-642-19692-8_90

Schubert, A.; Wolf, N.; Zeidler, H.: Micro-EDM: Process Effects on the Tool Wear Ratio. In: Proceedings of the 11th international conference of the european society for precision engineering and nanotechnology, 2011, Band 2, S. 546–549, Hrsg.: Spann, H.; Shore, P.; Van Brussel, H.; Burke, T., DOI: 10.24406/publica-fhg-371715

Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Schubert, A.: Precision Turning with Localized Anodic Dissolution. In: Proceedings of the 11th international conference of the european society for precision engineering and nanotechnology, 2011, Band 2, S. 513–517, Hrsg.: Spann, H.; Shore, P.; Van Brussel, H.; Burke, T., ISBN: 978-0-9553082-9-1, URL: https://www.euspen.eu/knowledge-base/ICE11317.pdf

Schubert, A.; Funke, R.; Nestler, A.: Influence of Kinematics on the Surface Integrity in Orthogonal Turn-Milling of Aluminium Matrix Composites. In: Proceedings of the 11th international conference of the european society for precision engineering and nanotechnology, 2011, Band 2, S. 480–483, Hrsg.: Spann, H.; Shore, P.; Van Brussel, H.; Burke, T., ISBN: 978-0-9553082-9-1, URL: https://www.euspen.eu/knowledge-base/ICE11309.pdf

Schubert, A.; Edelmann, J.; Sylla, D.; Hackert-Oschätzchen, M.: Structuring of Tribological Active Surfaces for Reduction of Frictional Losses. In: Proceedings of the 11th international conference of the european society for precision engineering and nanotechnology, 2011, Band 2, S. 156–159, Hrsg.: Spann, H.; Shore, P.; Van Brussel, H.; Burke, T., DOI: 10.24406/publica-fhg-371382

Schubert, A.; Jahn, S. F.; Müller, B.; Hackert-Oschätzchen, M.: Study on the Influence of the Forming Velocity in Micro Impact Extrusion with Modular Dies. In: Proceedings of the 11th international conference of the european society for precision engineering and nanotechnology, 2011, Band 1, S. 20–24, Hrsg.: Spann, H.; Shore, P.; Van Brussel, H.; Burke, T., ISBN: 978-0-9553082-9-1, URL: https://www.euspen.eu/knowledge-base/ICE11104.pdf

Schubert, A.; Neugebauer, R.; Sylla, D.; Avila, M.; Hackert-Oschätzchen, M.: Manufacturing of surface microstructures for improved tribological efficiency of powertrain components and forming tools. In: CIRP Journal of Manufacturing Science and Technology, 2011, Band 4(2), S. 200–207, DOI: 10.1016/j.cirpj.2011.01.010

Neugebauer, R.; Schubert, A.; Avila, M.; Sylla, D.; Schmidt, T.: Multi-scale structures for influencing the tribological properties of metallic surfaces. In: Proceedings of the ASPE euspen Joint Topical Meeting, 2011, DOI: 10.24406/publica-fhg-371740

Schubert, A.; Nestler, A.; Pinternagel, S.; Zeidler, H.: Influence of ultrasonic vibration assistance on the surface integrity in turning of the aluminium alloy AA2017. In: Materialwissenschaft und Werkstofftechnik, 2011, Band 42(7), S. 658–665, DOI: 10.1002/mawe.201100834

Schubert, A.; Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.: Design and realization of micro structured surfaces for thermodynamic applications. In: Microsystem Technologies, 2011, Band 17(9), S. 1471–1479, DOI: 10.1007/s00542-011-1331-x

Neugebauer, R.; Schubert, A.; Reichmann, B.; Dix, M.: Influence exerted by tool properties on the energy efficiency during drilling and turning operations. In: CIRP Journal of Manufacturing Science and Technology, 2011, Band 4(2), S. 161–169, DOI: 10.1016/j.cirpj.2011.06.011

Schubert, A.; Zeidler, H.; Wolf, N.; Hackert-Oschätzchen, M.; Schneider, J.: Ultrasonic Assistance and Nonconductive Materials: Shifting the Boundaries of Micro-EDM. In: Proceedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Hrsg.: Slabe, J. M., ISBN: 978-961-6692-02-1

Schubert, A.; Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Edelmann, J.: Precision and Micro ECM with Localized Anodic Dissolution. In: Proceedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Hrsg.: Slabe, J. M., ISBN: 978-961-6692-02-1

Neugebauer, R.; Schubert, A.; Richter, F.; Koriath, H.-J.; Peter, S.; Berg, S.; Jahn, S. F.; Müller, B.; Müller, M.: Fabrication and characterization of a form- and force-locked piezo-metal sensor module. In: Proceedings of the 3rd. Scientific Symposium "Integration of Active Functions into Structural Components" of the CRC/Transregio 39, 2011, S. 23–28, Hrsg.: Neugebauer, R., ISBN: 978-3-00-035549-3

Hackert-Oschätzchen, M.; Jahn, S. F.; Schubert, A.: Design of Electrochemical Machining Processes by Multiphysics Simulation. In: Proceedings of the European COMSOL Conference, 2011, ISBN: 978-0-9839688-0-1, URL: https://www.comsol.com/paper/11841

Schubert, A.; Meichsner, G.; Hackert-Oschätzchen, M.; Zinecker, M.; Edelmann, J.: Pulsed Electrochemical Machining of Powder Metallurgy Steels. In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, 2011, S. 68–75, Hrsg.: Mollay, B.; Lohrengel M. M., ISBN: 978-3-00-036247-7

Schubert, A.; Hackert-Oschätzchen, M.; Meichsner, G.; Zinecker, M.; Martin, A.: Evaluation of the Influence of the Electric Potential in Jet Electrochemical Machining. In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, 2011, S. 47–54, Hrsg.: Mollay, B.; Lohrengel M. M., ISBN: 978-3-00-036247-7

Neugebauer, R.; Schubert, A.; Wittstock, V.; Schlegel, H.; Klimant, P.; Quellmalz, J.; Sonntag, D.: Optimierung des Energiebedarfs der CNC-gesteuerten Bearbeitung. In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2011, Band 106(7-8), S. 491–495, DOI: 10.3139/104.110593

Schubert, A.; Schneider, J.; Eckert, U.; Groß, S.; Pinternagel, S.: Höhere Prozesssicherheit beim Mikrofräsen von gehärtetem Stahl. In: MM Maschinenmarkt, 2011, Band 117(48), S. 28–31, ISSN: 0341-5775, URL: https://www.maschinenmarkt.vogel.de/hoehere-prozesssicherheit-beimmikrofraesen-von-gehaertetem-stahl-a-340051/

Schubert, A.; Wolf, N.; Zeidler, H.; Schneider, J.: Indirect Approach to Ultrasonic Superposition in Micro-EDM. In: ASME 2011 International Manufacturing Science and Engineering Conference, 2011, Band 1, S. 427–434, DOI: 10.1115/MSEC2011-50240

2010

Hackert, M.: Entwicklung und Simulation eines Verfahrens zum elektrochemischen Abtragen von Mikrogeometrien mit geschlossenem elektrolytischen Freistrahl (Dissertation). In: Scripts Precision and Microproduction Engineering, 2010, Band 2, Hrsg.: Schubert, A., Verlag Wissenschaftliche Scripten, ISBN: 978-3-937524-95-5

Schubert, A.; Pohl, R.; Hackert, M.: Micro Impact Extrusion of Precision Cavities with Modular Dies. In: Proceedings of the 10th international conference of the european society for precision engineering and nanotechnology, 2010, Hrsg.: van Brussel, H.; Shore, P.; Spaan, H.; Burke, T., ISBN: 978-0-9553082-8-4, URL: https://www.euspen.eu/knowledge-base/ICE10253.pdf

Schubert, A.; Nestler, A.: Approaches to Enhance Surface Integrity in Turning of Aluminium Matrix Composites. In: Proceedings of the 10th international conference of the european society for precision engineering and nanotechnology, 2010, Hrsg.: van Brussel, H.; Shore, P.; Spaan, H.; Burke, T., ISBN: 978-0-9553082-8-4, URL: https://www.euspen.eu/knowledge-base/ICE10297.pdf

Schubert, A.; Drossel, W.-G.; Pohl, R.; Kranz, B.: Investigation of a force-locked connection of micro piezo elements with aluminium carrier material. In: Production Engineering, 2010, Band 4(4), S. 399–405, DOI: 10.1007/s11740-010-0238-1

Schubert, A.; Zeidler, H.: Implementation of Micro-EDM Process for Machining of Nonconductive Ceramics. In: Proceedings of the 16th International Symposium on Electromachining, 2010, S. 565–569, ISBN: 978-7-313-05630-6

Schubert, A.; Zeidler, H.: Micro-Electro Discharge Machining Process Optimization by Integration of Measurement, Actuation and Flushing. In: Proceedings of the 12th Mechatronics Forum Biennial International Conference, 2010, Band 1, S. 230–236, Hrsg.: Kennel, T., ISBN: 978-3-033-02507-3

Götze, U.; Helmberg, C.; Rünger, G.; Schubert, A.; Goller, S.; Krellner, B.; Lau, A.; Sygulla, R.: Integrating Energy Flows in Modeling Manufacturing Processes and Process Chains of Powertrain Components. In: Tagungsband zum 1. Internationalen Kolloquium des Spitzentechnologieclusters eniPROD, 2010, S. 409–438, Hrsg.: Neugebauer, R., ISBN: 978-3-942267-00-7

Neugebauer, R.; Schubert, A.; Bräunlich, H.; Dix, M.; Rennau, A.; Reichmann, B.: Ressourceneffizienz in Haupt-, Neben- und Endformgebungsprozessen für Präzisionskomponenten in Antrieben. In: Tagungsband zum 1. Internationalen Kolloquium des Spitzentechnologieclusters eniPROD, 2010, S. 439–460, Hrsg.: Neugebauer, R., ISBN: 978-3-942267-00-7

Schubert, A.; Neugebauer, R.; Sylla, D.; Avila, M.; Hackert, M.: Fertigungs- und Oberflächentechnologien für anforderungsgerechte, tribologisch effiziente Oberflächen von Umformwerkzeugen und Powertrain-Bauteilen. In: Tagungsband zum 1. Internationalen Kolloquium des Spitzentechnologieclusters eniPROD, 2010, S. 461–482, Hrsg.: Neugebauer, R., DOI: 10.24406/publica-fhg-366522

Schubert, A.; Nestler, A.; Funke, R.: Einfluss von Werkzeugschneidengeometrie und Prozessparametern auf die Oberflächenfeingestalt beim Drehfräsen von Aluminiummatrix-Verbundwerkstoffen. In: Materialwissenschaft und Werkstofftechnik, 2010, Band 41(9), S. 795–801, DOI: 10.1002/mawe.201000667

Gröger, S.; Burkhardt, T.; Eckert, U.; Kühn, C.: New characterization methods for the assessment and the design of friction optimized surfaces. In: Sustainable production for resource efficiency and ecomobility, 2010, S. 839–846, Hrsg.: Neugebauer, R., ISBN: 978-3-942267-04-5

Schubert, A.; Nestler, A.; Schmidt, T.; Schneider, J.: Finishing of aluminium based light weight materials-influence on surface properties. In: Sustainable production for resource efficiency and ecomobility, 2010, S. 447–464, Hrsg.: Neugebauer, R., DOI: 10.24406/publica-fhg-367097

Hackert, M.; Schubert, A.; Meichsner, G.: Abtragende Fertigung mikrostrukturierter Oberflächen mit geschlossenem elektrolytischem Freistrahl. In: Galvanotechnik, 2010, Band 101(10), S. 2232–2236, ISSN: 0016-4232

Hackert, M.; Meichsner, G.; Zinecker, M.; Schubert, A.: Micro Turning with Closed Electrolytic Free Jet. In: Proceedings of Sixth International Symposium on Electrochemical Machining Technology, 2010, S. 97–103, Hrsg.: Deconinck, J.; De Wilde, D., DOI: 10.24406/publica-fhg-367416

Hackert, M.; Meichsner, G.; Jahn, S. F.; Schubert, A.: Investigating the Influence of Dynamic Jet Shapes on the Jet Electrochemical Machining Process. In: Proceedings of the European COMSOL Conference, 2010, ISBN: 978-0-9825697-6-4 , URL: https://www.comsol.com/paper/8002

Schubert, A.; Jahn, S. F.; Hackert, M.: Simulation of a Forming Process for Joining a Piezo Aluminium Module. In: Proceedings of the European COMSOL Conference, 2010, ISBN: 978-0-9825697-6-4 , URL: https://www.comsol.com/paper/8702

Jahn, S. F.; Ebert, S.; Hackert, M.; Goedel, W. A.; Schubert, A.; Baumann, R. R.: Simulation of the Mechanical Stability of Inkjet-Printed Hierarchical Microsieves. In: Proceedings of the European COMSOL Conference, 2010, ISBN: 978-0-9825697-6-4, URL: https://www.comsol.com/paper/8705

2009

Edelmann, J.; Worsch, C.; Schubert, A.; Rüssel, C.: Micro structuring of inorganic glass by hot embossing of coated glass wafers. In: Microsystem Technologies, 2009, Band 16(4), S. 553–560, DOI: 10.1007/s00542-009-0961-8

Worsch, C.; Rüssel, C.; Edelmann, J.; Schubert, A.: Isothermes Heißprägen von beschichteten Glaswafern. In: Vakuum in Forschung und Praxis, 2009, Band 21(5), S. 10–14, DOI: 10.1002/vipr.200900394

Schubert, A.; Nestler, A.: Erzeugung hoher Oberflächengüten an partikelverstärkten Werkstoffen. In: MM Maschinenmarkt, 2009, Band 115(15), S. 44–48, ISSN: 0341-5775, URL: https://www.maschinenmarkt.vogel.de/erzeugung-hoher-oberflaechengueten-an-partikelverstaerkten-werkstoffen-a-176943/

Schubert, A.; Zeidler, H.: Machining of nonconductive ZrO2 ceramics with Micro-EDM. In: Proceedings of the 9th international conference of the european society for precision engineering and nanotechnology, 2009, Band 2, S. 6–9, Hrsg.: van Brussel, H.; Brinksmeier, E.; Spaan, H., ISBN: 978-0-9553082-6-0

Schubert, A.; Hackert, M.; Meichsner, G.: Elektrochemisches Strukturieren von Oberflächen mit geschlossenem elektrolytischen Freistrahl. In: Tagungsband zum 12. Werkstofftechnischen Kolloquium, 2009, DOI: 10.24406/publica-fhg-363302

Schubert, A.; Pohl, R.: Mikrostrukturierung von Al-Blechen mittels Durchsetzen – Werkzeuggestaltung und experimentelle Bewertung. In: Tagungsband zum 2. wissenschaftlichen Symposium des SFB/Transregio 39 PT-PIESA, 2009, Hrsg.: Neugebauer, R., ISBN: 978-3-00-027544-9

Rose, H.; Goller, S.; Schubert, A.: Achsbezogene Erfassung der Antriebsleistungen in Abhängigkeit der Prozessparameter beim Drehen. In: Virtuelle Instrumente in der Praxis - Begleitband zum Kongress VIP 2009, 2009, S. 2530, Hrsg.: Jamal, R.; Jaschinski, H., DOI: 10.24406/publica-fhg-363731

Schubert, A.; Funke, R.; Nestler, A.: Oberflächenausbildung beim Drehfräsen von Aluminiummatrix-Verbundwerkstoffen mit Diamant-Werkzeugen. In: wt Werkstattstechnik online, 2009, Band 99(11-12), S. 858–864, DOI: 10.37544/1436-4980-2009-11-12-858

Schubert, A.; Pohl, R.; Hackert, M.: Simulation of a Modular Die Stamp for Micro Impact Extrusion. In: Proceedings of the European COMSOL Conference, 2009, ISBN: 978-0-9825697-2-6, URL: https://www.comsol.com/paper/7029

Hackert, M.; Schubert, A.; Meichsner, G.: Simulation of a Heated Tool System for Jet Electrochemical Machining. In: Proceedings of the European COMSOL Conference, 2009, ISBN: 978-0-9825697-2-6, URL: https://www.comsol.com/paper/7260

Schubert, A.; Hackert, M.; Meichsner, G.: Simulating the Influence of the Nozzle Diameter on the Shape of Micro Geometries Generated with Jet Electrochemical Machining. In: Proceedings of the European COMSOL Conference, 2009, ISBN: 978-0-9825697-2-6, URL: https://www.comsol.com/paper/6816

Hackert, M.; Meichsner, G.; Schubert, A.: Generating plane and microstructured surfaces applying Jet Electrochemical Machining. In: Proceedings of Fifth International Symposium on Electrochemical Machining Technology, 2009, Hrsg.: Michaelis, A.; Schneider, M., DOI: 10.24406/publica-fhg-363303

Schubert, A.; Nestler, A.: Endbearbeitung von Aluminiummatrix-Verbundwerkstoffen durch Drehen. In: Materialwissenschaft und Werkstofftechnik, 2009, Band 40(7), S. 580–586, DOI: 10.1002/mawe.200900493

2008

Schubert, A.; Schneider, J.; Eckert, U.; Schulz, B.: Prozessintegriertes Messen in der Mikrozerspanung. In: wt Werkstattstechnik online, 2008, Band 98(11-12), S. 927–932, DOI: 10.37544/1436-4980-2008-11-12-927

Hackert, M.; Meichsner, G.; Schubert, A.: Generating Micro Geometries with Air assisted Jet Electrochemical Machining. In: Proceedings of the euspen 10th Anniversary International Conference, 2008, Hrsg.: van Brussel, H.; Brinksmeier, E.; Spaan, H., DOI: 10.24406/publica-fhg-358083

Schubert, A.; Hackert, M.: Blick in den Elektrolytstrahl. In: Mikroproduktion, 2008, Ausgabe 4, S. 44–47, ISSN: 1614-4538

Hackert, M.; Meichsner, G.; Schubert, A.: Simulation of the Shape of Micro Geometries generated with Jet Electrochemical Machining. In: Proceedings of the European COMSOL Conference, 2008, ISBN: 978-0-9766792-3-3, URL: https://www.comsol.com/paper/5106

Schubert, A.; Nestler, A.: Einfluss der Schneideneckengestaltung und Spanleitgeometrie von CVD-Diamant-Werkzeugen auf den Zerspanungsprozess beim Drehen von partikelverstärkten Aluminiumwerkstoffen. In: Tagungsband zum 11. Werkstofftechnischen Kolloquium in Chemnitz, 2008, Band 31, S. 291–296, Hrsg.: Wielage, B., ISBN: 978-3-00-025648-6

Schubert, A.; Hochmuth, C.; Nestler, A.; Georgi, R.: Spanende Bearbeitung hartpartikelverstärkter Werkstoffe. In: Tagungsband zum 5. Chemnitzer Produktionstechnischen Kolloquium CPK 2008 – Zerspanung in Grenzbereichen, 2008, Band 46, S. 149–167, DOI: 10.24406/publica-fhg-358974

Schubert, A.; Zeidler, H.: Novel Approach to Efficiency Determination in Micro Electro Discharge Machining. In: Proceedings of the 10th anniversary international conference of the european society for precision engineering and nanotechnology, 2008, Band 2, S. 488–492, Hrsg.: van Brussel, H.; Brinksmeier, E.; Spaan, H., ISBN: 978-0-9553082-5-3

Schubert, A.; Pohl, R.: Fließpressen von Mikrostrukturen. In: wt Werkstattstechnik online, 2008, Band 98(10), S. 855–859, DOI: 10.37544/1436-4980-2008-10-855

2007

Schubert, A.; Neugebauer, R.; Schulz, B.: System Concept and Innovative Component Design for Ultra-Precision Assembly Processes. In: Towards Synthesis of Micro-/Nano-systems, 2007, S. 29–34, Hrsg.: Kimura, F.; Horio, K., DOI: 10.1007/1-84628-559-3_4

Schubert, A.: Development of Process Chains for Micro Fabrication. In: Proceedings of International Conference on Competitive Manufacturing (COMA 07), 2007, S. 185–189, Hrsg.: Dimitrov, D.

Hackert, M.; Meichsner, G.; Schubert, A.: Electrochemical Machining of Carbide Metal Micro Tools. In: 7th international conference and 9th international general meeting of the European society for precision engineering and Nanotechnology, 2007, Band 2, S. 509–512, Hrsg.: Thornett, E., DOI: 10.24406/publica-fhg-354998

Schubert, A.; Schulz, B.; Eckert, U.: Improvement of Micro-Cutting Accuracy by In-Process Application of 3D-Sensors. In: 7th international conference and 9th international general meeting of the European society for precision engineering and Nanotechnology, 2007, Band 2, S. 368–371, Hrsg.: Thornett, E., DOI: 10.24406/publica-fhg-355006

Schubert, A.; Schneider, J.; Burkhardt, T.: Process chains for the production of micro-structured functional surfaces in plastics and metals. In: 7th international conference and 9th international general meeting of the European society for precision engineering and Nanotechnology, 2007, Band 1, S. 53–56, Hrsg.: Thornett, E., DOI: 10.24406/publica-fhg-355014

Schubert, A.; Schulz, B.; Blank, G.: A New Type of 3D Micro Machining System-Properties and Applications. In: 10th CIRP International Workshop on Modeling of Machining Operations, 2007, S. 501–508, DOI: 10.24406/publica-fhg-354957

Hackert, M.; Meichsner, G.; Schubert, A.: Fast micro structuring with electrolyte jet machining. In: Proceedings of International Symposium on Electrochemical Machining Technology, 2007, Band 1, S. 123–128, Hrsg.: Schubert, A., DOI: 10.24406/publica-fhg-355240

Schubert, A.; Nestler, A.: Einfluss der Bearbeitungsparameter und Werkzeugschneidengeometrie auf die Zerspankraft sowie Oberflächenqualität beim Drehen von AMCs. In: Tagungsband zum 1. Kolloquium zum SFB 692 (HALS), 2007, Band 25, S. 112–119, Hrsg.: Wielage, B., ISBN: 978-3-00-021910-8

Schubert, A.; Nestler, A.: Einfluss der Werkzeuggeometrie auf die Oberflächencharakteristik beim Drehen von partikelverstärkten Aluminiumwerkstoffen. In: Tagungsband zum 10. Werkstofftechnischen Kolloquium, 2007, Band 26, S. 280–285, Hrsg.: Wielage, B., ISBN: 978-3-00-021586-5

Schubert, A.; Pohl, R.: Untersuchungen zur umformtechnischen Herstellung von Präzisionskavitäten in Aluminiumwerkstoffen. In: 1. wissenschaftliches Symposium des SFB/Transregio 39 PT-PIESA, 2007, S. 12–17, Hrsg.: Neugebauer, R., ISBN: 978-3-00-023339-5

2006

Schubert, A.; Edelmann, J.; Burkhardt, T.: High Temperature Micro Forming of Inorganic Glass – an Effective Replication Method. In: 6th International Conference and 8th General Meeting of the European Society for Precision Engineering and Nanotechnology, 2006, Band 2, S. 144–147, DOI: 10.24406/publica-fhg-351669

Schubert, A.; Schulz, B.; Freitag, H.: Modular System Concept for Ultra Precision Assembly. In: 6th International Conference and 8th General Meeting of the European Society for Precision Engineering and Nanotechnology, 2006, Band 2, S. 76–79, DOI: 10.24406/publica-fhg-351391

Schubert, A.; Schulz, B.: Electromechanical Actuation for Gripper Integrated Angel Adjustment. In: 10th International Conference on New Actuators & 4th International Exhibition on Smart Actuators and Drive Systems, 2006, S. 1021–1024, Hrsg.: Borgmann, H., DOI: 10.24406/publica-fhg-351115

Nestler, A.; Schubert, A.; Naumann, E.: Einfluss der Bearbeitungsparameter auf die Zerspankraft beim Drehen von Al2O3-partikelverstärkten Aluminiumwerkstoffen. In: Tagungsband zum 9. Werkstofftechnischen Kolloquium, 2006, Band 24, S. 47–52, ISBN: 978-3-00-019101-5

Edelmann, J.; Schubert, A.; Bechtloff, U.; Hoffmann, T.; Hackert, J.: Hot-embossed metallic circuit board. In: 7th International Congress Molded Interconnect Devices – MID, 2006, S. 177–185, DOI: 10.24406/publica-fhg-351542

Schubert, A.; Hackert, M.; Meichsner, G.: Electrochemical drilling of deep micro holes with bulk electrodes. In: Third International Symposium on Electrochemical Machining Technology, 2006

Schubert, A.; Edelmann, J.; Burkhardt, T.: Micro structuring of borosilicate glass by high-temperature micro-forming. In: Microsystem Technologies, 2006, Band 12(8), S. 790–795, DOI: 10.1007/s00542-005-0074-y

2005

Neugebauer, R.; Schubert, A.; Burkhardt, T.: Wirkung höherer Umformgeschwindigkeiten auf Strukturausbildung und Werkzeugbelastung beim Mikroumformen. In: Erweiterung der Formgebungsgrenzen bei Umformprozessen (Abschlussbericht zum DFG-Schwerpunktprogramm 1074 Aachen), 2005, S. 277–284, Hrsg.: Kopp, R., ISBN: 3-86130-416-3

Schubert, A.; Schneider, J.; Eckert, U.: Process analysis during micro cutting of high-strength materials. In: International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipment, 2005, Band 2, S. 591–594, Hrsg.: Weck, M.; Kunzmann, H., ISBN: 92-990035-0-5

Schubert, A.; Koriath, H.-J.; Böttcher, R.: Angle-controlled assembly of inclination sensors. In: International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipment, 2005, Band 1, S. 299–302, Hrsg.: Weck, M.; Kunzmann, H., ISBN: 92-990035-0-5

Schubert, A.; Koriath, H.-J.; Schneider, J.; Blank, G.: Highest Precision Milling and Process-Adjusted Drive Control. In: 8th CIRP International Workshop on Modeling of Machining Operations, 2005, S. 447–462, Hrsg.: Neugebauer, R., ISBN: 3-937524-24-X

Schubert, A.; Koriath, H.-J.; Hollemann, G.: Micro structuring of metallic moulds and surfaces with a Q-switched thin disc laser. In: Proceedings of the 3rd International WLT-Conference on Lasers in Manufacturing LIM, 2005, S. 461–464, Hrsg.: Beyer, E.; Dausinger, F.; Ostendorf, A.; Otto, A., ISBN: 3-00-016402-2

Schubert, A.; Schneider, J.; Eckert, U.: Mikro- und Höchstpräzisionsbearbeitung durch spanende und abtragende Verfahren. In: Innovative Technologien zur Leistungssteigerung in der Zerspan- und Abtragtechnik, 2005

Schubert, A.: Prozessketten der Mikrofertigung. In: Workshop Rationelle Fertigung in der Mikrotechnik, 2005, S. 1–13, Hrsg.: Blau, W.

Schubert, A.; Schneider, J.; Eckert, U.: Spanende Mikrobearbeitung und Prozessketten zur Fertigung von Werkzeugen und Formen. In: TECHNOMER 2005, 19. Fachtagung über Verarbeitung und Anwendung von Polymeren, 2005, S. 57, ISBN: 3-00-017458-3

2004

Siebenhaar, C.: Precise adjustment method using stroke impulse and friction. In: Precision Engineering, 2004, Band 28(2), S. 194–203, DOI: 10.1016/j.precisioneng.2003.10.003

Schubert, A.: Mikrotechnische Fertigung für Prototypen und Serien. Vortrag: Mikrostrukturierung und Mikropositionierung, Dresden, 14.04.2004

Schubert, A.: Technologien und Prozessketten zur Fertigung mikrostrukturierter Formen und Bauteile in hochfesten Werkstoffen. Vortrag: Workshop Prototypen und Werkzeuge für die Mikrotechnik, Chemnitz, 28.04.2004

Schubert, A.; Koriath, H.-J.; Schulz, B.; Böttcher, R.: Precision-Tilt-Gripper with Rigid 3D-Structure (Part 2). In: International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipment, 2004, S. 123–125, Hrsg.: Weck, M.; Kunzmann, H., DOI: 10.24406/publica-fhg-346536

Schubert, A.; Hollitschke, L.; Schneider, J.: Electrochemical Micromachining of Steel and Nickel-Base Super alloys. In: International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipment, 2004, S. 61–63, Hrsg.: Weck, M.; Kunzmann, H., DOI: 10.24406/publica-fhg-346537

Koriath, H.-J.; Schulz, B.; Schubert, A.: Flexible micro assembly systems and tools. In: Mechatronics & Robotics Conference (MECHROB), 2004, Band 4/4, S. 1590–1593, Hrsg.: Drews, P., ISBN: 3-938153-30-X

Schulz, B.; Schubert, A.; Dietel, U.: Passive Mikromontagestrategie zur Feinjustage von Sende- und Empfangsmodulen an Wellenleiterstirnflächen. In: 10. GMM-Workshop Methoden und Werkzeuge zum Entwurf von Mikrosystemen, 2004, S. 247–254, DOI: 10.24406/publica-fhg-346538

Schubert, A.; Rau, B.; Burkhardt, T.; Borck, J.: Hot embossing of glass and metal. In: The 8th SEMI Microsystem/MEMS Seminar, 2004, S. 181–182

2003

Schubert, A.: Mikrobearbeitung hochfester Werkstoffe durch spanende und elektrochemische Verfahren. Vortrag: Präzisions- und Mikrobearbeitung mit Verfahren der Zerspan- und Abtragungstechnik, 21.03.2003

Neugebauer, R.; Schubert, A.; Koriath, H.-J.; Schulz, B.: Friction-Free TCP-Kinematic for Tilt micro manipulator. In: International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipment, 2003, Band 1, DOI: 10.24406/publica-fhg-342589

Burkhardt, T.; Ebeling, P.; Schubert, A.; Semar, W.: Mikrostrukturierung von Glas durch Heißprägen. In: International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipment, 2003, Band 1

Schubert, A.; Burkhardt, T.: Abformtechnologien zur Mikrostrukturierung von Glas. Vortrag: Mikrosystemtechnologie, Chemnitz, 29.–30.10.2003

2002

Schubert, A.; Zander, G.; Jutzler, W.-I.; Keilhofer, O.: Erodieren unter der Lupe – Präzisions-Funkenerodiertechnik in der Mikrofertigung. In: Form + Werkzeug, 2002, Ausgabe 1, S. 48–50, ISSN: 1439-667X

Neugebauer, R.; Schubert, A.: Influence of Increased Strain Rate on Flow Strength and Friction during Microforming. In: 7th International Conference on Technology of Plasticity, 2002, Band 1, S. 397–403

2001

Schubert, A.; Otto, T. W.; Böhm, J.; Neugebauer, R.; Geßner, T.: Fabrication of Micro Fluidic Structure by High Precision Embossing. In: Micro System Technologies, 2001, S. 571–576, Hrsg.: Reichel, H., ISBN: 3-8007-2601-7

Neugebauer, R.; Schubert, A.; Böhm, J.; Burkhardt, T.: Forming Technologies for Production of Microstructured Parts. In: 2nd International Conference of the European Society for Precision Engineering and Nanotechnology, 2001, Band 1, S. 184–187

Neugebauer, R.; Schubert, A.: Zusammenhang zwischen Umformgeschwindigkeit und Energieeintrag unter Beachtung des Reib- und Werkstoffverhaltens bei der Umformung von Miniaturwerkstücken. In: Kolloquium zum DFG-SPP 1047 - Erweiterung der Formgebungsgrenzen bei Umformprozessen, 2001, S. 96–100

Böhm, J.; Schubert, A.; Otto, T. W.; Burkhardt, T.: Micro-metalforming with silicon dies. In: Microsystem Technologies, 2001, Band 7(4), S. 191–195, DOI: 10.1007/s005420000084

Schubert, A.; Burkhardt, T.; Schneider, J.: Mechanische Mikrofertigung – Potentiale trennender und umformender Mikrofertigungsverfahren. In: 5. Chemnitzer Fachtagung Mikrosystemtechnik, Mikromechanik und Mikroelektronik, 2001, S. 151–158

2000

Siegert, K.; Frank, H.; Geiger, M.; Eckstein, R.; Neugebauer, R.; Schubert, A.; Böhm, J.: Umformtechnische Herstellung kleiner Bauteile. In: Fertigungstechnisches Kolloquium 2000, 2000, S. 164–182, Springer Berlin Heidelberg, DOI: 10.1007/978-3-642-59804-3_9

Otto, T. W.; Schubert, A.; Böhm, J.; Geßner, T.: Fabrication of micro-optical components by high-precision embossing. In: SPIE Proceedings, 2000, DOI: 10.1117/12.395679

1999

Neugebauer, R.; Schubert, A.; Kadner, J.; Burkhardt, T.: High Precision Embossing of Microparts. In: 6th International Conference on Technology of Plasticity, 1999, S. 921–926, ISBN: 3-540-66066-6

  • Ki generiertes Bild

    Offen für Argumente geht in die zweite Runde

    Online-Debattenformat der Juniorprofessur Soziologie der TU Chemnitz thematisiert am 10. September 2025 die Rolle der Solarenergie im Zuge der Energiewende …

  • Gruppe vieler Menschen

    Let's run #TUCgether!

    Zum Jubiläum des Chemnitzer Firmenlaufs gingen 266 Laufbegeisterte für die TU Chemnitz an den Start …

  • Menschen stehen vor einer Leinwand

    Erfolgreiche Summer School an der TU Chemnitz

    Professur Medienpsychologie und die Hochschulallianz Across begrüßten zur Summer School „How much science is in science fiction?“ medienbegeisterte Nachwuchswissenschaftlerinnen und -wissenschaftler aus neun verschiedenen Ländern …

  • Menschen stehen vor einem Haus

    Als Azubi an die Uni? Ja, klar!

    Kanzler der TU Chemnitz begrüßte neue Auszubildende und gratulierte Absolventinnen und Absolventen zum erfolgreichen Berufsabschluss – TU Chemnitz bildet aktuell in zehn Berufen aus …